search

sfjohnso / PicoW

Code in MMBasic for the Raspberry Pi Pico W
2 stars 0 forks source link

help #1

Open NA7KR opened 6 months ago

NA7KR commented 6 months ago

Hello, I was following picscopr in Makezine and loaded firmware and set all options, I uploaded PicoScope.bas with XMODEM and the screen is blank.

Do need to upload all files? any order?

Kevin

sfjohnso commented 6 months ago

Hi, Kevin - Thank you for trying out my code!  It really makes me happy when people do so.Please be sure that all of the options are set according to the steps specified in the article.  You should see confirmation via the terminal emulator after each (this may only be a momentary pause, then the “>” prompt).If you are still having issues, please let me know (there are some test commands that you can run to verify that the LCD is working properly; they’re discussed in the MMBasic manual, which I don’t have with me right now).Best regards - - SteveOn Mar 3, 2024, at 3:25 PM, NA7KR @.***> wrote: Hello, I was following picscopr in Makezine and loaded firmware and set all options, I uploaded PicoScope.bas with XMODEM and the screen is blank. Do need to upload all files? any order? Kevin

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: @.***>

NA7KR commented 6 months ago

Hi Steve,

I found the answer was missing the run command. Is there a way to start it running automatically?

Thanks, Kevin

NA7KR

From: Steve Johnson @.> Sent: Sunday, March 3, 2024 1:49 PM To: sfjohnso/PicoW @.> Cc: NA7KR @.>; Author @.> Subject: Re: [sfjohnso/PicoW] help (Issue #1)

Hi, Kevin - Thank you for trying out my code! Â It really makes me happy when people do so.Please be sure that all of the options are set according to the steps specified in the ar

‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌

CAUTION: External email from: notifications@‌github.‌com Use caution before clicking on links or opening attachments.

Protection by https://mxguardian.net MXGuardian

Hi, Kevin - Thank you for trying out my code! It really makes me happy when people do so.Please be sure that all of the options are set according to the steps specified in the article. You should see confirmation via the terminal emulator after each (this may only be a momentary pause, then the “>” prompt).If you are still having issues, please let me know (there are some test commands that you can run to verify that the LCD is working properly; they’re discussed in the MMBasic manual, which I don’t have with me right now).Best regards - - SteveOn Mar 3, 2024, at 3:25 PM, NA7KR @. <mailto:@.> > wrote: Hello, I was following picscopr in Makezine and loaded firmware and set all options, I uploaded PicoScope.bas with XMODEM and the screen is blank. Do need to upload all files? any order? Kevin

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: @. <mailto:@.> >

— Reply to this email directly, view it on GitHub https://github.com/sfjohnso/PicoW/issues/1#issuecomment-1975370067 , or unsubscribe https://github.com/notifications/unsubscribe-auth/ABP7QGJ3EDPVX4AAM4TQOATYWOLDTAVCNFSM6AAAAABEEILKFKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNZVGM3TAMBWG4 . You are receiving this because you authored the thread. https://github.com/notifications/beacon/ABP7QGPWKLJIUNL5LZCBAQLYWOLDTA5CNFSM6AAAAABEEILKFKWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTTVXXAVG.gif Message ID: @. @.> >

sfjohnso commented 6 months ago

Yes!  Use the Flash Overwrite 1 command to save the code to the flash area, then the Autorun 1 command to get it to automatically start. You can find the precise syntax in the MMBasic manual; unfortunately I don’t have a copy with me at the moment.Best regards - - SteveOn Mar 4, 2024, at 9:41 AM, NA7KR @.***> wrote: Hi Steve,

I found the answer was missing the run command. Is there a way to start it running automatically?

Thanks, Kevin

NA7KR

From: Steve Johnson @.***>

Sent: Sunday, March 3, 2024 1:49 PM

To: sfjohnso/PicoW @.***>

Cc: NA7KR @.>; Author @.>

Subject: Re: [sfjohnso/PicoW] help (Issue #1)

Hi, Kevin - Thank you for trying out my code! Â It really makes me happy when people do so.Please be sure that all of the options are set according to the steps specified in the ar

‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌

CAUTION: External email from: notifications@‌github.‌com

Use caution before clicking on links or opening attachments.

Protection by https://mxguardian.net MXGuardian

Hi, Kevin - Thank you for trying out my code! It really makes me happy when people do so.Please be sure that all of the options are set according to the steps specified in the article. You should see confirmation via the terminal emulator after each (this may only be a momentary pause, then the “>” prompt).If you are still having issues, please let me know (there are some test commands that you can run to verify that the LCD is working properly; they’re discussed in the MMBasic manual, which I don’t have with me right now).Best regards - - SteveOn Mar 3, 2024, at 3:25 PM, NA7KR @. <mailto:@.> > wrote:

Hello, I was following picscopr in Makezine and loaded firmware and set all options,

I uploaded PicoScope.bas with XMODEM and the screen is blank.

Do need to upload all files? any order?

Kevin

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: @. <mailto:@.> >

—

Reply to this email directly, view it on GitHub https://github.com/sfjohnso/PicoW/issues/1#issuecomment-1975370067 , or unsubscribe https://github.com/notifications/unsubscribe-auth/ABP7QGJ3EDPVX4AAM4TQOATYWOLDTAVCNFSM6AAAAABEEILKFKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNZVGM3TAMBWG4 .

You are receiving this because you authored the thread. https://github.com/notifications/beacon/ABP7QGPWKLJIUNL5LZCBAQLYWOLDTA5CNFSM6AAAAABEEILKFKWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTTVXXAVG.gif Message ID: @. @.> >

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @.***>