When trying to setup I get the input for the host, add the host ip address, leave the port at 502, I know this combination works as it works with the Homeassistant Modbus integration. I do not click the write option. Click the Submit button and get the spinning wheel. Homeassistant then restarts and I get an 'unknown error' in the setup box when HA restarts.
When trying to setup I get the input for the host, add the host ip address, leave the port at 502, I know this combination works as it works with the Homeassistant Modbus integration. I do not click the write option. Click the Submit button and get the spinning wheel. Homeassistant then restarts and I get an 'unknown error' in the setup box when HA restarts.
Homeassistant: Core: 2024.8.3 Supervisor: 2024.08.0
HA Log: Logger: hass_nabucasa.iot Source: runner.py:190 First occurred: 21:56:19 (1 occurrences) Last logged: 21:56:19
Connection closed: Cannot write to closing transport
This error originated from a custom integration.
Logger: custom_components.victron.sensor Source: /config/custom_components/victron/sensor.py:158 integration: victron (documentation, issues) First occurred: 21:56:29 (2 occurrences) Last logged: 21:57:01
The reported value 244.0 for entity vebus state isn't a decobale value. Please report this error to the integrations maintainer NoneType: None
Victron GX Modbus TCP : v0.3.0
Victron GX: Raspberry Pi: v3.41 MultiPlus Compact 12/2000/80-30: v552 SmartShunt 500A: v4.16 SmartSolar Charger MPPT 100/30: v1.64 SmartSolar Charger MPPT 75/15 rev2: v1.64