ThSGM
commented
6 years ago I just confirmed that I have the same issue, or at least it was of a similar nature. On startup, the camera lens would rotate 180 degrees to the rear (as it always does) but would get stuck in that rear-facing position with the motor running. Usually this happens for 8-10 seconds and then the camera activates. However, it would continue running the motor stuck in this position.
If you remove the memory card, then unplug the camera and plug it up, then it starts as normal. I removed the memory card. The free space was around 500mb. I then manually deleted the videos, and this brought it back to working.
xufan6, have you had the same issue since formatting your card? Is this an issue with the memory card or the firmware/camera?
Yi Dome Camera Base Firmware 1.9.1.0H_201708091518 yi-hack-v3 Firmware 0.1.5
I'm using a 32G tf card from Feb. Tonight its begin bootloop, and wifi cannot connect. When I poweroff it and push the tf card out, then poweron, it can recovery and wifi connected normal. I'm trying mount tf card to computer, and then found there is about 50% size usage (less than 16G). After delete few records (5files, total 30M), and insert card into camera, its also bootloop. After delete all Feb records on card (remain size below 6.5G), and insert it to camera and it can normal boot.
Then I use Yi app to format the card. If it happen again few weeks later, I will provide more info as I can.