search

shadow-1 / yi-hack-v3

Alternative Firmware for Xiaomi Cameras based on Hi3518e Chipset
GNU General Public License v3.0
1.16k stars 154 forks source link

Yi 1080p 48US Home yi-hack-v3 no web login #251

Closed morphirr closed 5 years ago

morphirr commented 5 years ago

I have Yi Home 702 patch worked second time, I also now have a Yi Home 1080p I put the rootfs_y20 home_y20 and followed this instructions it did seem to flash but it is not letting me login like on the Yi Home 702 anyone know what is wrong? Camera is now on firmware 2.0.0.1A_201612051401 update available to 2.1.0.0E_201809191630 can the firmware still be updated after the yi-hack-v3?

-- | --

mfizz1 commented 5 years ago

Sounds silly what version is your camera? us eu cn?

morphirr commented 5 years ago

Ok I flashed it again with same Sandisk 32GB after another format & I finally got it working on Yi Home 1080p 48US which has firmware 2.1.0.0C_201710091352I had to reset the camera several times as it wasn't pairing and would give a timeout msg, I also plugged it into the router for power and proximity to the router (i have found best to do pairing as close to router as possible) I also got that error 2009 at one stage I thought I'd bricked? I then tried the web server which let me login so ProxyChains-ng was enabled which i disabled then when I tried to pair it that did the trick, Can I now update to latest firmware 2.1.0.0E_201809191630 with both these cams now hacked, or do I have to remain on this firmware all new to me so appreciate any help???

mfizz1 commented 5 years ago

You should be able to upgrade to latest without losing root access. It does say on main page to use a 16gb fat32 card.

Anyway it appears that the issue is resolved you can mark is it as closed.

morphirr commented 5 years ago

@mfizz1 are you a mod as I see that you have had problems with this exact camera 48US and the patch only shows 47US so i dont know if it is suitable for this camera, can anyone clarify that? Although it is working great so far after attempting to apply the patch several times and finally getting it installed I am still on the patch firmware as I'm not sure if it is safe to upgrade and dont want a brick or any more problems as I only just bought these cameras, but thanks for the hard work the patch is brilliant with its additional features, thanks so much for any assistance

mfizz1 commented 5 years ago

The patch is suppose to work for 48cn . More importantly it's about having the same chipset which all of these cameras do. The SD card plays a big factor in the performance.

You can upgrade and if it goes wrong you can revert using recovery firmware, but it won't. You have root access until you flash recovery