Still need sorting but here is a list of DIN standards and there coresponding ISO standard with chages. The list is base on Fuller

0-99

[ ] DIN 1 Unhardened taper pins ; ISO 2339, Nominal length redefined (with round end)
[ ] DIN 7 Parallel pins of unhardened steel and austenitic stainless steel ; ISO 2338, Nominal length redefined (with round end) form A+C deleted
[x] DIN 84 Slotted cheese head screws – Product grade A ; ISO 1207, Modifications of dimensions < 2,5; dimension of slots changed; partly nominal lengths deleted; strength 8.8 deleted
[ ] DIN 85 Slotted pan head screws – Product grade A ; ISO 1580, Thread included; dimensions of head and slot changed; strength 8.8 deleted
[ ] DIN 93 Tab Washers with Long Tab
[ ] DIN 94 Slotted set screws with long dog point ; ISO 1234, No modifications of dimensions
[ ] DIN 95 Slotted raised countersunk (oval) head wood screws
[X] DIN 96 Slotted round head wood screws
[ ] DIN 97 Slotted countersunk (flat) head wood screws
[ ] DIN 98 Rotatable ball handles
[ ] DIN 99 Tapered handles

100-199

[ ] DIN 125-1 Product grade A washers with a hardness up to 250 HV, designed for use with hexagon head bolts and nuts ; ISO 7089, ISO 7090, Without chamfer, up to nominal diameter 64
[ ] DIN 125-2 Product grade A washers with a hardness from 300 HV, designed for use with hexagon head bolts and nuts ; ISO 7089, ISO 7090, Without chamfer, up to nominal diameter 64
[ ] DIN 126 Product grade C washers, designed for use with hexagon head bolts and nuts ; ISO 7091, Nominal sizes changed
[ ] DIN 127 Spring lock washers with square ends or tang ends
[ ] DIN 128 Curved spring lock washers
[ ] DIN 137 Wave spring washers
[ ] DIN 186 T-head bolts with square nec
[ ] DIN 188 T-head bolts with double nib

200-299

[ ] DIN 258 Taper pins with thread ends and constant taper lengths
[ ] DIN 264 T-head bolts

300-399

[X] DIN 315 Fasteners - Wing nuts - Rounded wings
[ ] DIN 316 Fasteners - Wing screws - Rounded wings
[ ] DIN 319 Ball knobs

400-499

[ ] DIN 404 Slotted capstan screws
[ ] DIN 417 Slotted set screws with long dog point ; ISO 7435, No modifications of dimensions
[ ] DIN 427 Slotted headless screws with shank ; ISO 2342
[ ] DIN 431 Pipe nuts with thread according to DIN EN ISO 228-1
[ ] DIN 432 Scheiben mit Außennase (Sicherungsbleche mit Nase)
[ ] DIN 433-1 Product grade A washers with a hardness up to 250 HV, designed for use with cheese head screws ; ISO 7092, Pyramid diamond hardness 140 HV cancelled; rating changed
[ ] DIN 433-2 Product grade A washers with a hardness up to 300 HV, designed for use with cheese head screws ; ISO 7092, Nominal sizes changed
[ ] DIN 434 Square taper washers for U-sections
[ ] DIN 435 Square taper washers for I-sections
[ ] DIN 436 Square washers, especially for wood constructions
[ ] DIN 438 Slotted set screws with cup point (modified version of ISO 7436, 1983 edition) ; ISO 7436 check for changes needs to be done
[ ] DIN 439-1 Hexagon thin nuts with M 1,6 to M 10 threads ; ISO 4036, Correlation of dimensions with DIN 439-1, except for the width across flat of the nut M10
[ ] DIN 439-2 Hexagon thin nuts with M 1,6 to M 52 and M 8×1 to M 52×3 threads ; ISO 4035, ISO 8675, In tables 1 and 2 abbreviations changed and some specifications (thread dimensions) changed, Standard divided by regular type screw threads and fine threads; width across flats according to ISO 272 changed; nominal size range changed; fine thread see ISO 8675; regular type screw thread see ISO 4035
[ ] DIN 440 Plain washers – Extra large series, product grade C ; ISO 7094, Nominal sizes changed, nominal size 24 size “a” redefined to the maximum, square-end hole Form R omitted; (standard DIN 440 still valid)
[ ] DIN 443 Sealing push-in caps
[ ] DIN 444 Fasteners - Eye bolts
[ ] DIN 462 Machine tools - Internal tab washers for slotted round nuts in conformity with DIN 1804
[ ] DIN 463 Washers with 2 taps
[X] DIN 464 Knurled thumb screws, high type; #353
[X] DIN 465 Slotted Knurled Thumb Screws; #353
[ ] DIN 466 Knurled nuts, high type
[ ] DIN 467 Knurled nuts, low type
[ ] DIN 470 Sealing washers
[X] DIN 471 Retaining rings for shafts - Normal type and heavy type
[X] DIN 472 Retaining rings for bores - Normal type and heavy type
[X] DIN 478 Square head bolts with collar
[ ] DIN 479 Square head bolts with short dog point
[ ] DIN 480 Square head bolts with collar and short dog point with rounded end

500-599

[X] DIN 508-1 Roofing and cladding products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel ; ISO 299, check for changes need to be done
[X] DIN 508-2 Roofing and cladding products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium ; ISO 299, check for changes need to be done
[X] DIN 508-3 Roofing and cladding products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel ; ISO 299, check for changes need to be done
[ ] DIN 525 Studs for welding
[ ] DIN 529 Masonry and foundation bolts
[ ] DIN 546 Slotted round nuts
[ ] DIN 551 Slotted set screws with flat point ; ISO 4766, No modifications of dimensions
[ ] DIN 553 Slotted set screws with cone point ; ISO 7434, No modifications of dimensions
[ ] DIN 555 Hexagon nuts; Metric Thread, Type g ; ISO 4034, Width across flats according to DIN ISO 272 included; nominal diameter reduced
[ ] DIN 557 Square nuts; product grade C
[ ] DIN 558 Hexagon screws, Thread Approximately to Head, Metric Thread, Type g ; ISO 4018, Nominal size extended; width across flats according to DIN ISO 272 included
[ ] DIN 561 Hexagon head set screws with small hexagon and full dog point
[ ] DIN 562 Square thin nuts - Product grade B
[ ] DIN 564 Hexagon head set screws with small hexagon and half dog point and flat cone point
[X] DIN 571 Hexagon head wood screws
[ ] DIN 580 Lifting eye bolts
[ ] DIN 582 Lifting eye nuts

600-699

[ ] DIN 601 Hexagon Bolts without Hexagon Nut – with Hexagon Nut, Type g ; ISO 4016, Nominal size extended; width across flats according to DIN ISO 272 included
[X] DIN 603 Mushroom head square neck bolts ; ISO 8677
[ ] DIN 604 Flat countersunk head nib bolts
[ ] DIN 605 Flat countersunk head square neck bolts with long square
[ ] DIN 607 Cup head nib bolts
[ ] DIN 608 Flat countersunk head square neck bolts with short square
[ ] DIN 609 Hexagon fits bolts with long thread
[ ] DIN 610 Hexagon fitting bolts with short threaded portion
[ ] DIN 650 Machine tools; T-slots; dimensions
[X] DIN 653 Knurled thumb screws, low type ; #353
[ ] DIN 660 Round head rivets - Nominal diameters 1 mm to 8 mm ; ISO 1051 ceck for changes need to be done
[ ] DIN 661 Countersunk head rivets - Nominal diameters 1 mm to 8 mm ; ISO 1051 check for changes need to be done
[ ] DIN 662 Mushroom head rivets - Nominal diameters 1,6 mm to 6 mm ; ISO 1051 check for changes need to be done
[ ] DIN 674 Flat round head rivets - Nominal diameters 1,4 mm to 6 mm ; ISO 1051 check for changes need to be done

700-799

[ ] DIN 703 Shaft Collars with Set Screws
[ ] DIN 705 Adjusting rings
[ ] DIN 741 Clips for free ends of wire ropes; to meet requirements of minor importance
[ ] DIN 766 Round steel link chains - Round steel link chains, pitch 2,8d, for chain conveyors, grade 3, quenched and tempered ; don't know if implemanting a chain makes sense
[ ] DIN 787 Bolts and screws for T-slots ISO 299 checks for changes need to be done

800-899

[ ] DIN 835 Studs - Metal end ≈ 2 d

900-999

[ ] DIN 906 Internal drive pipe plugs - Conical thread
[ ] DIN 908 Internal drive screw plugs with collar - Cylindrical thread
[ ] DIN 909 Hexagon head pipe plugs - Conical thread
[ ] DIN 910 Hexagon head screw plugs with collar - Cylindrical thread
[ ] DIN 911 Hexagon socket screw keys (allen keys) **
[ ] DIN 912 Hexagon socket head cap screws ; ISO 4762, Nominal size range changed; fine thread deleted (ISO 21269)
[ ] DIN 913 Hexagon socket set screws with flat point ; ISO 4026, Nominal sizes M1.4, M1.8, M14, M18 and M22 omitted
[ ] DIN 914 Hexagon socket set screws with cone point ; ISO 4027, Nominal sizes M1.4, M1.8, M14, M18 and M22 omitted
[ ] DIN 915 Hexagon socket set screws with dog point ; ISO 4028, Nominal sizes M1.4, M1.8, M14, M18 and M22 omitted
[ ] DIN 916 Hexagon socket set screws with cup point ; ISO 4029
[X] DIN 917 Hexagon cap nuts, low type
[ ] DIN 920 Slotted pan head screws with small head
[ ] DIN 921 Slotted pan head screws with large head
[ ] DIN 923 Slotted pan head screws with shoulder
[ ] DIN 927 Slotted shoulder screws
[X] DIN 928 Square weld nuts
[X] DIN 929 Hexagon weld nuts
[ ] DIN 931-1 Hexagon head bolts with shank; M 1,6 to M 39 screw threads, Product grades A and B ; ISO 4014, Nominal size extended; width across flats according to DIN ISO 272 included
[X] DIN 933 Hexagon head screws – Product grades A and B ; ISO 4017, Nominal size extended; width across flats according to DIN ISO 272 included
[X] DIN 934 Hexagon nuts; Metric screw threads; Product grades A and B ; ISO 4032, ISO 8673, Nominal diameter changed, height of the nut changed partially; nuts with fine thread specified in DIN EN ISO 8673; nuts with regular type screw thread specified in DIN EN ISO 4032; width across flats according to DIN ISO 272 included
[ ] DIN 935-1 Hexagon slotted and castle nuts - Part 1: Metric coarse and fine pitch thread, product grades A and B ; only coarse pitch is implemented, the fine pitch is missing
[ ] DIN 935-3 Hexagon slotted nuts - Part 3: Metric coarse pitch thread, product grade C
[ ] DIN 936 M 8 to M 52 and M 8 × 1 to M 52 × 3 hexagon thin nuts; product grades A and B ; ISO 4035, ISO 8675 check for changes need to be done
[ ] DIN 937 Hexagon thin castle nuts (previous design)
[ ] DIN 938 Studs - Metal end ≈ 1 d
[ ] DIN 939 Studs - Metal end ≈ 1,25 d
[ ] DIN 960 Hexagon bolts, Metric fine thread, Types m and mg ; ISO 8765, Nominal size extended; width across flats according to DIN ISO 272 included
[X] DIN 961 M 8×1 to M 100×4 hexagon head bolts with fine pitch thread ; ISO 8676, Nominal size extended; width across flats according to DIN ISO 272 included
[ ] DIN 963 Slotted countersunk (flat) head screws (Countersunk heads according to ISO) ; ISO 2009, Nominal size changed; head dimension changed; thread length changed; strength 8.8 cancelled
[ ] DIN 964 Slotted raised countersunk (oval) head screws (Countersunk heads according to ISO) ; ISO 2010, Nominal size changed; head dimension changed; thread length changed; strength 8.8 cancelled
[ ] DIN 965 Cross recessed countersunk (flat) head screws (Countersunk heads according to ISO) ; ISO 7046-1, Nominal size changed; head dimension changed; thread length changed; strength 8.8 included (see Part 2); penetration depth of cross slots changed
[ ] DIN 966 Cross recessed countersunk (oval) head screws (Countersunk heads according to ISO) ; ISO 7047, Nominal size changed; head dimension changed; thread length changed; strength 8.8 omitted; penetration depth of cross slots changed
[X] DIN 967 Cross recessed pan head screws with collar - Product grade A
[ ] DIN 975 Threaded rods (not intended for new designs)
[ ] DIN 976 Fasteners - Stud bolts - Part 1: Metric thread
[ ] DIN 979 Hexagon thin slotted and castle nuts - Metric coarse and fine pitch thread, product grades A and B ; ISO 7038 checks for changes need to be done
[ ] DIN 980 All-metal prevailing torque type hexagon nuts ; ISO 7042, Height of nut changed; width across flat according to ISO 272 included; and ISO 10513, Height of nut changed; width across flat according to ISO 272 included
[ ] DIN 981 Rolling bearings - Locknuts
[ ] DIN 982 Prevailing torque type hexagon nuts with non-metallic insert ; ISO 7040, ISO 10512, Height of nut changed; width across flat according to ISO 272 included
[ ] DIN 983 Retaining rings with lugs for shafts (internal circlips)
[ ] DIN 985 Prevailing torque type hexagon thin nuts with non-metallic insert ; ISO 10511, Height of nut changed; width across flat according to ISO 272 included
[ ] DIN 986 Prevailing torque type hexagon domed cap nuts with nonmetallic insert
[ ] DIN 988 Shim rings and supporting rings

1000-1099

[ ] DIN 1052

1100-1199

[X] DIN 1143-1 Nails for use in automatic nailing machines; #353
[X] DIN 1144 Nails for light weight building slabs; #353
[X] DIN 1151 Round plain head nails ; replayced by DIN EN 10230-1 Steel wire nails - Part 1: Loose nails for general applications (ex DIN 1151, there may be changes) ; #353
[X] DIN 1152 Round nails with cold headed head ; #353
[ ] DIN 1158 Hook nails
[x] DIN 1160 Wire nails with extra large head
[ ] DIN 1163 Molding pins

1200-1299

1300-1399

1400-1499

[ ] DIN 1433 Clevis pins without head ; ISO 2340, Some other nominal lengths defined
[ ] DIN 1434 Clevis pins with head ; ISO 2341, Only one head dimension. Some other nominal lengths defined
[ ] DIN 1435 Clevis pins with head ; ISO 2341, Only one head dimension. Some other nominal lengths defined
[ ] DIN 1436 Clevis pins with head ; ISO 2341, Only one head dimension. Some other nominal lengths defined
[ ] DIN 1440 Plain washers for clevis pins; product grade A ; ISO 8738, Nominal sizes changed
[ ] DIN 1441 Washers for clevis pins - Product grade C
[ ] DIN 1443 Clevis pins without head ; ISO 2340
[ ] DIN 1444 Clevis pins with head ; ISO 2341, Some other nominal lengths defined
[ ] DIN 1470 Grooved pins – Fulllength parallel grooved, with pilot ; ISO 8739, Nominal lengths redefined. Shear rate increased.
[ ] DIN 1471 Grooved pins – Fulllength taper grooved ; ISO 8744, Nominal lengths redefined. Shear rate increased.
[ ] DIN 1472 Grooved pins – Half-length taper grooved ; ISO 8745, Nominal lengths redefined. Shear rate increased.
[ ] DIN 1473 Grooved pins – Full-length parallel grooved, with chamfer ; ISO 8740, Nominal lengths redefined. Shear rate increased.
[ ] DIN 1474 Grooved pins – Half-length reverse-taper grooved ; ISO 8741, Nominal lengths redefined. Shear rate increased.
[ ] DIN 1475 Grooved pins – One-third-length centre grooved ; ISO 8742, Nominal lengths redefined. Shear rate increased.
[ ] DIN 1476 Grooved pins with round head ; ISO 8746, Chamfer redefined
[ ] DIN 1477 Grooved pins with countersunk head ; ISO 8747, Chamfer redefined
[ ] DIN 1478 Turnbuckles made from steel tubes or round steel bars
[ ] DIN 1479 Hexagon turnbuckles
[ ] DIN 1480 Forged turnbuckles, (open type)
[ ] DIN 1481 Spring-type straight pins – Slotted, heavy duty ; ISO 8752, Specification “non-jamming” included; chamfer redefined; partial change of dimensions

1500-1599

[X] DIN 1587 Hexagon cap nuts, high type

1600-1699

1700-1799

1800-1899

[ ] DIN 1804 Slotted Round Nut for Hook Spanner; ISO Metric Fine Thread
[ ] DIN 1816 Round Nut with Set Pin Holes Inside; ISO Metric Fine Thread

1900-1999

2000-2099

[ ] DIN 2093 Disc springs - Quality specifications - Dimensions

2100-2199

2200-2299

2300-2399

2400-2499

2500-2599

[ ] DIN 2510-1 Bolted connections with reduced shank, survey and installation; studies relating to the calculation of bolted connections
[ ] DIN 2510-2 Bolted connections with waisted shank - Part 2: Metric thread with large clearance - Nominal dimensions and limits of size
[ ] DIN 2510-3 Bolted Connections with Reduced Shank; Stud-bolts
[ ] DIN 2510-4 Bolted Connections with Reduced Shank; Studs
[ ] DIN 2510-5 Bolted Connections with Reduced Shank; Hexagon Nuts
[ ] DIN 2510-6 Bolted connections with waisted shank - Part 6: Cap nuts
[ ] DIN 2510-7 Bolted Connections with Reduced Shank - Extension Sleeves
[ ] DIN 2510-8 Bolted Connections with Reduced Shank; Threaded Holes for Studs

2600-2699

2700-2799

2800-2899

2900-2999

3000-3099

[ ] DIN 3016-1 Fastening clamps - Part 1: With tongue
[ ] DIN 3016-2 Fastening clamps - Part 2: With fastening lugs
[ ] DIN 3017-1 Hose clamps - Part 1: Clamps with worm gear drive, shapes A and B
[ ] DIN 3017-2 Hose clamps - Part 2: Clamps with fastening lugs, shapes B1 and B2
[ ] DIN 3017-3 Hose clamps - Part 3: Bolt clamps, shapes C1 and C2
[ ] DIN 3017-5 Hose clamps - Part 5: Wide strip hose clamps with fastening lugs, shapes D and E

3100-3199

3200-3299

3300-3399

3400-3499

[ ] DIN 3404 Lubricating nipples; button head
[ ] DIN 3405 Lubricating nipples cupped type

3500-3599

[ ] DIN 3567 Pipe Brackets for NW 20 to 500
[ ] DIN 3568 Clamping plates for the suspension of pipes on I and IPB beams
[ ] DIN 3570 Steel Strap for Tubes of NW 20 to 500

4000-4099

4100-4199

5200-5299

[ ] DIN 5299 Snap hook half-round wire, round wire and forged

5400-5499

[ ] DIN 5406 Rolling bearings - Lockwashers; Safety plate, Lockclip

5500-5599

[ ] Compressed air equipment for rail vehicles - Locking screws with collar and vent

6300-6399

[ ] DIN 6303 Knurled nuts
[ ] DIN 6304 Tommy screws with fixed clamping bolt
[ ] DIN 6305 Tommy nuts with fixed clamping bolt
[ ] DIN 6306 Tommy screws with movable clamping bolt
[ ] DIN 6307 Clamping Nuts with Loose Bar
[ ] DIN 6311 Thrust pads
[X] DIN 6319 Spherical washers, conical seats
[ ] DIN 6321 Support and location pins
[ ] DIN 6323 Slot stones, loose
[ ] DIN 6325 Parallel pins, Hardened; Tolerance Zone m6 ; ISO 8734, Some other nominal lengths defined
[X] DIN 6330 Hexagon nuts with a height of 1,5 d
[X] DIN 6331 Hexagon collar nuts with a height of 1,5 d
[ ] DIN 6332 Grub screws with thrust point
[ ] DIN 6335 Palm grips
[ ] DIN 6336 Star grips
[X] DIN 6340 Washers for clamping devices

6700-6799

[ ] DIN 6796 Conical spring washers for bolted connections ; ISO 106797 check for changes needs to be done
[ ] DIN 6797 Toothed lock washers
[ ] DIN 6798 Serrated lock washers
[X] DIN 6799 Retaining washers for shafts

6800-6899

[ ] DIN 6885-1 Drive type fastenings without taper action, parallel keys, keyways - Deep pattern - Part 1: Dimensions, tolerances, mass ; ISO 773 check for changes needs to be done
[ ] DIN 6885-2 Drive type fastenings without taper action, parallel keys, keyways - Deep pattern for machine tools - Part 2: Dimensions, tolerances, mass ; ISO 773 check for changes needs to be done
[ ] DIN 6885-3 Drive type fastenings without taper action, parallel keys, keyways - Low pattern - Part 3: Dimensions, tolerances, mass ; ISO 773 check for changes needs to be done
[ ] DIN 6886 Stressed-type Fastenings with Taper Action; Taper Keys, Keyways, Dimensions and Application
[ ] DIN 6887 Stressed-type Fastenings with Taper Action; Taper Keys with Gip Head, Keyways, Dimensions and Application : ISO 7744 check for changes needs to be done
[ ] DIN 6888 Drive type fastenings without taper action - Woodruff keys - Dimensions and application ; ISO 3912 check for changes needs to be done
[ ] DIN 6899 Steel thimbles for fibre ropes

6900-6999

[ ] DIN 6911 Hexagon socket screw keys with pilot
[X] DIN 6912 Hexagon socket head cap screws with reduced loadability - Low head, with centre
[ ] DIN 6914 High-strength hexagon head bolts with large widths across flats for structural steel bolting ; ISO 7412
[ ] DIN 6915 High-strength hexagon nuts with large widths across flats for structural steel bolting ; ISO
[ ] DIN 6916 Washers for high tensile bolting in steel structures ; ISO 7416
[ ] DIN 6917 Square taper washers for high-strength structural bolting of steel I sections
[ ] DIN 6918 Square taper washers for high-strength structual bolting of steel channel sections
[ ] DIN 6921 Hexagon flange bolts ; ISO 8102, Dimensions partially changed; width across flats according to ISO 272; strength 12.9 omitted
[ ] DIN 6923 Hexagon nuts with flange ; ISO 4161, Fine thread omitted to be included in a separate standard later; width across flat M10 changed
[ ] DIN 6924 Prevailing torque type hexagon nuts with non-metallic insert ; ISO 7040, ISO 10512, Height of nut changed; width across flat according to ISO 272 included
[ ] DIN 6925 Prevailing torque type all-metal hexagon nuts ; ISO 7042, ISO 10513, Height of nut changed; width across flat according to ISO 272 included
[ ] DIN 6926 Prevailing torque type hexagon nuts with flange (with non-metallic insert), with metric fine pitch thread ; ISO 12125, Width across flat M10 changed
[ ] DIN 6927 Prevailing torque type – All-metal hexagon nuts with flange ; ISO 7044, Width across flat M10 changed

7300-7399

[ ] DIN 7337 Break mandrel blind rivets
[ ] DIN 7343 Spring-type straight pins – Coiled, standard duty ; ISO 8750, Range of nominal diameters and lengths extended. Shear range changed.
[ ] DIN 7344 Spring-type straight pins – Coiled, heavy duty ; ISO 8748, Range of nominal diameters and lengths extended. Shear range changed.
[ ] DIN 7346 Spring-type straight pins, slotted, light duty ; ISO 3337, Specification “non-jamming” included; chamfer redefined; partial change of dimensions
[ ] DIN 7349 Plain washers for bolts with heavy clamping sleeves

7500-7599

[ ] DIN 7500-1 Thread rolling screws for ISO metric thread – Part 1: Technical specifications for case hardened and tempered screws ; ISO, Normative revision, values for case-hardening depth and hole size revised, torque values reduced
[ ] DIN 7504 Cross recessed countersunk head drilling screws with tapping screw thread ; ISO 15480, ISO 15481, ISO 15482, ISO 15483 and ISO 10666, thread ST 3.9 omitted; hexagon head with collar and slot (Form L) omitted
[ ] DIN 7513 Thread cutting screws - Hexagon screws and slotted head screws - Dimensions, requirements, testing
[ ] DIN 7516 Thread cutting screws - Cross recessed head screws - Dimensions, requirements, testing

7600-7699

[ ] DIN 7603 Sealing rings
[ ] DIN 7604 Hexagon head screw plugs - Light type - Cylindrical thread
[ ] DIN 7643 Compression couplings - Hollow screws for ring-type banjos

7900-7999

[ ] DIN 7964 Reduced shank bolts and screws with coarse thread
[ ] DIN 7965 Screwed Inserts (Screw Plugs)
[X] DIN 7967 Self Locking Counter Nuts
[ ] DIN 7968 Hexagon fit bolts with hexagon nut for steel structures
[ ] DIN 7969 Slotted countersunk head bolts with hexagon nut for steel structures
[ ] DIN 7971 Slotted pan head tapping screws ; ISO 1481 check for changes need to be done
[ ] DIN 7972 Slotted countersunk head tapping screws ; ISO 1482 check for changes need to be done
[ ] DIN 7973 Slotted raised countersunk head tapping screws ; ISO 1479 check for changes need to be done
[ ] DIN 7976 Slotted set screws with cup point ; ISO 1479, No modifications of dimensions
[ ] DIN 7977 Unhardened taper pins with external thread ; ISO 8737, Technical delivery conditions partially changed
[ ] DIN 7978 Unhardened taper pins with internal thread ; ISO 8736, Dimensions partially changed
[ ] DIN 7979 Parallel pins with internal thread, of unhardened and austenitic stainless steel ; ISO 8733, ISO 8735, Dimensions partially changed
[ ] DIN 7980 Spring lock washers with spuare ends for cheese head screws
[ ] DIN 7981 Cross recessed pan head tapping screws ; ISO 7049, Marginal change of head dimensions. Caution with automatic feed and connection systems
[ ] DIN 7982 Countersunk (flat) head tapping screws with cross recess ; ISO 7050, Head dimensions and countersunk angles changed
[ ] DIN 7983 Raised countersunk (oval) head; tapping screws with cross recess ; ISO 7051, Head dimensions and countersunk angles changed
[X] DIN 7984 Hexagon socket head cap screws with low head with reduced loadability
[ ] DIN 7985 Recessed raised cheese (fillister) head screws ; ISO 7045, Nominal size changed; head dimension changed; thread length changed; penetration depth of cross slots changed
[ ] DIN 7989-1 Washers for steel structures - Part 1: Product grade C
[ ] DIN 7989-2 Washers for steel structures - Part 2: Product grade A
[ ] DIN 7990 Hexagon head bolts with hexagon nut for steel structures
[ ] DIN 7991 Hexagon socket countersunk head screws ; ISO 10462
[ ] DIN 7993 Round Wire Snap Rings and Snap Ring Grooves for Shafts and Bores
[ ] DIN 7995 Cross recessed raised countersunk head wood screws
[X] DIN 7996 Cross recessed round head wood screws
[ ] DIN 7997 Cross recessed countersunk head wood screws
[ ] DIN 7999 High strength hexagon fit bolts with large widths across flats for structural steel bolting ; EN 14399-8 check for changes need to be done

8100-8199

9000-9099

[ ] DIN 9021 Washers; outside diameter ˜ 3 x bolt diameter ; ISO 7093-1, ISO 7093-2, Dimensions partially changed

11000-11099

[ ] DIN 11023 Agricultural machinery; linch pins
[ ] DIN 11024 Spring Cotters

15000-15099

[ ] DIN 15058 Lifting appliances; axle holder

15200-15299

[ ] DIN 15237 Continuous mechanical handling equipment; seating screws and cupped washers for the attachment of components to belts

22400-22499

25100-25199

[ ] Railway vehicles - Mushroom head anchor screws with metric ISO thread - Class C

28100-28199

[ ] DIN 28129 Clamp nuts for covers

32500-32599

[ ] DIN 32501-1 Studs for stud welding with tip ignition; threaded studs ; ISO 13918 check for changes need to be done
[ ] DIN 32501-2 Studs for stud welding with tip ignition; unthreaded studs ; ISO 13918 check for changes need to be done
[ ] DIN 32501-3 Studs for stud welding with tip ignition; threaded studs for automatic feed ; ISO 13918 check for changes need to be done
[ ] DIN 32501-5 Studs for stud welding with tip ignition; studs with internal thread for automatic feed ; ISO 13918 check for changes need to be done

34800-34899

[ ] DIN 34816 Plastic plain washers - Large series
[ ] DIN 34821 Cheese head screws with 12 point socket

68100-68199

[ ] DIN 68163 Fasteners for assembling timber pallets; nails

70800-70899

[ ] DIN 70852 Groove nuts; dimensions

70900-70999

[ ] DIN 70952 Locking plates for groove nuts DIN 70852

71400-71499

[ ] DIN 71412 Lubricating nipples; cone type

71700-71799

[ ] DIN 71752 Fork joints; yokes

71800-71899

[ ] DIN 71802 Ball joints with or without circlips

74300-74399

[ ] DIN 74361-1 Disc wheels for motor vehicles and trailers - Part 1: Connection dimensions for bolt- and mixed centering
[ ] DIN 74361-2 Disc wheels for motor vehicles and trailers - Part 2: Fastening devices for bolt centering
[ ] DIN 74361-3 Disc wheels for motor vehicles and trailers - Part 3: Dimensions and fastening devices for hub-centering

80700-80799

[ ] DIN 80701 Wing nuts
[ ] DIN 80704 Bow nuts and eyebolts - Metric screw thread
[ ] DIN 80705 Thin nuts with small widths across flats - Coarse pitch thread, fine pitch thread

82100-82199

[ ] DIN 82101 Components for lifting, towing, lashing - Shackle, dee - Non-alloy quality steel

DIN EN

10200-10299

[ ] DIN EN 10230-1 Steel wire nails - Part 1: Loose nails for general applications ;(ex DIN 1151, there may be changes)

shaise / FreeCAD_FastenersWB

List of DIN Fasteners #321

0-99

100-199

200-299

300-399

400-499

500-599

600-699

700-799

800-899

900-999

1000-1099

1100-1199

1200-1299

1300-1399

1400-1499

1500-1599

1600-1699

1700-1799

1800-1899

1900-1999

2000-2099

2100-2199

2200-2299

2300-2399

2400-2499

2500-2599

2600-2699

2700-2799

2800-2899

2900-2999

3000-3099

3100-3199

3200-3299

3300-3399

3400-3499

3500-3599

4000-4099

4100-4199

5200-5299

5400-5499

5500-5599

6300-6399

6700-6799

6800-6899

6900-6999

7300-7399

7500-7599

7600-7699

7900-7999

8100-8199

9000-9099

11000-11099

15000-15099

15200-15299

22400-22499

25100-25199

28100-28199

32500-32599

34800-34899

68100-68199

70800-70899

70900-70999

71400-71499

71700-71799

71800-71899

74300-74399

80700-80799

82100-82199

DIN EN

10200-10299