Config Page Not Showing

[WickedxJosh]

Hello,

Ive installed the newest version of sdr scanner and am not getting it to show the config page. I installed the dev branch one.

I did it once before on an older Pi and it was showing the config page but no devices. So I wiped that and just did a clean install. Now theres no config page shown.

Any ideas on how to fix this?

[ossumpossum]

Having the same issue on the devel branch. Config page has one scanner listed for selection, but no devices. Both soapySDRUtil and auto_sdr correctly recognize the RTL-SDR that's connected.

~/rtl-sdr-scanner-cpp$ SoapySDRUtil --probe="driver=rtlsdr" ######################################################

Soapy SDR -- the SDR abstraction library

######################################################

Probe device driver=rtlsdr [WARNING] SoapyVOLKConverters: no VOLK config file found. Run volk_profile for best performance. Found Rafael Micro R820T tuner [INFO] Opening Generic RTL2832U OEM :: 00000001... Found Rafael Micro R820T tuner

---

-- Device identification

driver=RTLSDR hardware=R820T index=0 origin=https://github.com/pothosware/SoapyRTLSDR

---

-- Peripheral summary

Channels: 1 Rx, 0 Tx Timestamps: YES Time sources: sw_ticks Other Settings:

• Direct Sampling - RTL-SDR Direct Sampling Mode [key=direct_samp, default=0, type=string, options=(0, 1, 2)]
• Offset Tune - RTL-SDR Offset Tuning Mode [key=offset_tune, default=false, type=bool]
• I/Q Swap - RTL-SDR I/Q Swap Mode [key=iq_swap, default=false, type=bool]
• Digital AGC - RTL-SDR digital AGC Mode [key=digital_agc, default=false, type=bool]
• Test Mode - RTL-SDR Test Mode [key=testmode, default=false, type=bool]
• Bias Tee - RTL-SDR Blog V.3 Bias-Tee Mode [key=biastee, default=false, type=bool]

---

-- RX Channel 0

Full-duplex: NO Supports AGC: YES Stream formats: CS8, CS16, CF32 Native format: CS8 [full-scale=128] Stream args:

• Buffer Size - Number of bytes per buffer, multiples of 512 only. [key=bufflen, units=bytes, default=262144, type=int]
• Ring buffers - Number of buffers in the ring. [key=buffers, units=buffers, default=15, type=int]
• Async buffers - Number of async usb buffers (advanced). [key=asyncBuffs, units=buffers, default=0, type=int] Antennas: RX Full gain range: [0, 49.6] dB TUNER gain range: [0, 49.6] dB Full freq range: [23.999, 1764] MHz RF freq range: [24, 1764] MHz CORR freq range: [-0.001, 0.001] MHz Sample rates: [0.225001, 0.3], [0.900001, 3.2] MSps Filter bandwidths: [0, 8] MHz