Open GoogleCodeExporter opened 9 years ago
CC to you
Original comment by norbert....@googlemail.com
on 5 Jan 2011 at 2:29
Here a short Video
http://vimeo.com/18463091
Original comment by norbert....@googlemail.com
on 5 Jan 2011 at 3:22
i tested the r212 too but had some problems.
1.as norf said the altitude hold dont works good but i think its a setup
problem.
2.gps is working very good. but it dont locks out if i fly away. is it possible
to change the code so gps lock out when i move the stick to fly to another
point and than locks the new position when i let go the sticks?
3.switches should be changed like i wrote in the last issue.
4.i cant get the quad very stable in acromode
my testflight stopped here because the quad flipped over for no reasen in
stable mode.
Original comment by wart...@googlemail.com
on 5 Jan 2011 at 3:49
Remember Altitude Hold is not very accurate with BMP because of limitations on
the sensor itself. Did you try the Sonar sensor? For GPS hold, just go to
normal stable mode and fly to new position and relock. Does not make sense to
fly with GPS locked? Acromode itself is not a very stable platform and only
use gyro's so its for fun flying and acrobatric tricks. Maybe you need to
retune your Quad. I think your suggestions for the Mode switches is good... I
will look into this.
Original comment by lohnieh@gmail.com
on 5 Jan 2011 at 6:18
i dont have a sonar sensor. but its good to know that the bmp isnt that good
and for me its no really important to have altitude hold.
i know the gps behavoir i described from the mikrokopter project and i think
its a good feature. but if we can switch gps separatly in future its not a big
deal to lock and unlock manually.
for the acro mode i can do a really good compare to kk and multiwiicopter
because i fly them with gyros only. and espacially the mwc is very stable. but
i know that the acro mode isnt the main feature of the arducopter.
Original comment by wart...@googlemail.com
on 5 Jan 2011 at 10:01
Can I use both sonar and BMP on onde time? The Original NG you can't use both
sensor
Original comment by saifulaz...@gmail.com
on 16 Jan 2011 at 4:08
BMP and Sonar is suppose to work together
Original comment by lohnieh@gmail.com
on 17 Jan 2011 at 5:47
done
Original comment by lohnieh@gmail.com
on 21 Jan 2011 at 9:11
[deleted comment]
We will have to do more flight test to inspect this behaviour. I have only
a Quad with a sonar sensor, but will try to do some tests over the weekend.
Original comment by lohnieh@gmail.com
on 26 Jan 2011 at 7:16
Original comment by kidogof...@gmail.com
on 26 Jan 2011 at 9:00
Original issue reported on code.google.com by
norbert....@googlemail.com
on 5 Jan 2011 at 2:26