Open GoogleCodeExporter opened 9 years ago
please upload /tmp/hci_dump.pklg after it disconnects for a quick check. and
please provide a link to this Nyko
Wand, preferable with technical specifications.
Original comment by matthias.ringwald@gmail.com
on 18 Jan 2010 at 9:02
Here's the information for the Wand:
http://www.nyko.com/products/product-detail/?name=Wand
as for the dump, that will have to wait until I have access to my mac tomorrow.
Thanks so much for looking into this issue!
Do you have any idea what may be causing the connection to drop?
Original comment by mitchell...@gmail.com
on 18 Jan 2010 at 10:00
Here's the hci_dump.pklg file
http://www.mediafire.com/?jjcg1gzw2nn
Original comment by mitchell...@gmail.com
on 19 Jan 2010 at 3:37
hi mitchel026
the web site says it is compatible to the WiiMote. The log file looks fine,
btw. What
is the problem with the WiMote demo and yout Wand? Please note that the demo
only
recognizes rolling around the long axis of the device (as in the video part II)
Original comment by matthias.ringwald@gmail.com
on 20 Jan 2010 at 10:16
They are correct, and the wand is compatible with the Wii 100%.
I know that the demo only rolls on one axis, and that works fine for about 4
seconds.
After the 4 seconds, the Nyko wand powers itself off, however it doesn't do
this when
its connected to my mac or my friend's Wii.
Original comment by mitchell...@gmail.com
on 20 Jan 2010 at 10:34
interesting. I might have a similar problem with a keyboard type.
can you attach a log from the mac here (no need for ad-powered upload sites)?
you can create a log using PacketLogger from Application/UtilitiesBluetooth on
the Mac.
Original comment by matthias.ringwald@gmail.com
on 27 Jan 2010 at 1:15
hi
can you try with BTstack-0.1-551 update and report back? please with attached
new hci_dump.pklg
Original comment by matthias.ringwald@gmail.com
on 15 Feb 2010 at 9:30
did you try yet?
Original comment by matthias.ringwald@gmail.com
on 25 Feb 2010 at 6:59
in regards to this issue, i have the same problem with the nyko wiimote. i
currently
have 0.1-585 update and when the wimote demo connects to the wiimote, the
connection is
established for a few seconds and is shortly operational, then the wiimote
shuts off.
if you need any diagnostic info, let me know and i will try my best in helping
resolving this issue.
Original comment by cc17...@gmail.com
on 31 Mar 2010 at 11:19
hi CC. ok, let's have a new try on this. please attach the /tmp/hci_dump.pklg
from
your iPhone/iPod after it disconnects for a quick check or send it by mail to me
iphone@ringwald.ch with iFile.
Original comment by matthias.ringwald@gmail.com
on 31 Mar 2010 at 6:24
I have the same problem of using the Palm BT keyboard.What's the fix
Original comment by luverne....@gmail.com
on 13 Jul 2010 at 6:09
@luverne.tln what problem do you have? You don't have an Nyko Want :) Please
email to iphone@ringwald.ch for general support for BTstack products.
Original comment by matthias.ringwald@gmail.com
on 13 Jul 2010 at 6:15
[deleted comment]
I have the same problem. Nyko wand drops after 3 seconds. It also is not
working with the snes emulator, so it makes me think there might be some issue
with the driver and the wand.
Original comment by purified...@gmail.com
on 5 Nov 2010 at 4:45
Same problem here. Works fine for about 3 seconds, then the Nyko wiimote turns
off (it seems).
I'm guessing it's an issue with the remote itself, not the drivers. Could be
wrong, though.
Original comment by tach...@gmail.com
on 4 Dec 2010 at 2:41
as I said, the connection stays alive, but the Nyko Wand does not send more
data. It could be that we have to send some command periodically, but the
original WiiMote does not need that. I also didn't try to simulate a WiiMote to
see what the Wii is sending so far.A WiiMote emulation app might be nice too,
(without the IR detector of course).
Original comment by matthias.ringwald@gmail.com
on 4 Dec 2010 at 11:32
I just bought a Nyko Wand and am experiencing the same problems. Any support?
Original comment by DrScottB...@gmail.com
on 23 Mar 2011 at 3:52
I too have a Nyko wand that doesn't sync. It works with psx4all, for me, no
problems. Would really like for it to work with my other emulators. (iPhone 4,
4.2.1)
Original comment by Upser...@gmail.com
on 29 Mar 2011 at 5:35
[deleted comment]
My Nyko wand also stays connected with psx4all on my iPhone (though not all of
the time), but none of the other emulators. What is different about psx4all?
And why does it not work every time I try to connect with psx4all? It sometimes
responds just like the other emulators.
Original comment by furt...@gmail.com
on 21 Jun 2011 at 5:30
does your Nyko work with psx4all but not my original WiiMoteOpenGLESDemo from
Cydia?
Original comment by matthias.ringwald@gmail.com
on 21 Jun 2011 at 7:39
I've done more messing around, and it seems my Nyko only APPEARS to be staying
connected with psx4all. The 1st player light will continue to light up, but I'm
not getting any response from the wand during gameplay. And to answer your
question, I sometimes have connection for a few seconds with your app, other
times, nothing at all. The wand is found during the search, and is recognized,
but if signals are received from the wand, it is only for a few seconds. Thanks.
Original comment by furt...@gmail.com
on 22 Jun 2011 at 5:05
thanks for testing. if it would have worked with psx4all, I would have tried to
contact its author and ask for details. :)
Original comment by matthias.ringwald@gmail.com
on 23 Jun 2011 at 9:57
I'm having a similar problem with the nyko wand- when using any of the popular
wiimote-compatible snes emulators on ipad, the wiimote shows up in the list,
but doesn't connect at all. the wiimote will stop flashing, and the "player 1"
light never glows. the flashing of all 4 player slots continues for about 2
secs then just turns off. it's almost as if it's getting a kill signal from the
ipad, prematurely or something.
Original comment by WilliamK...@gmail.com
on 15 Aug 2011 at 11:38
I can confirm this as well with my Nyko wand
Original comment by pantera....@gmail.com
on 1 Oct 2011 at 10:28
nyko wand my control does not connect reconose flash buttons and the device but
the connection is not maintained, wanted to know if someone already solved
Original comment by vectors...@gmail.com
on 1 Oct 2012 at 1:42
Original issue reported on code.google.com by
mitchell...@gmail.com
on 18 Jan 2010 at 3:14