search

shannonjlove / cmediadrivers

Automatically exported from code.google.com/p/cmediadrivers
0 stars 0 forks source link

Cointrol Panel can't start - getting error #84

Closed GoogleCodeExporter closed 8 years ago

GoogleCodeExporter commented 8 years ago 
First of all, i'd like to say sorry for my bad englisch! Sry I'm german^^

What soundcard to you have (make, model, chip)?
Terratec Aureon 5.1 PCI on Win 7 x86

I installed the CMIDriver-1.2.6-bin-x86-WaveRT Driver (used setup.exe with 
admin-rights) and it says successfully and i rebooted my pc. 

But after rebooting I can't open the cm-control panel over the Windows Control 
Panel(Systemsteuerung), it says in german "Falsche Parameter" (he parameter is 
incorrect) It opened only very short and closed directly again.

Can't find any help on the web.

I just want to activate the SPDIF IN and this signal should be outputed over 
the analog outputs of the soundcard.

Please help me :)

Original issue reported on code.google.com by st....@web.de on 13 Jun 2011 at 10:10

GoogleCodeExporter commented 8 years ago 
please read the faq

Original comment by dogb...@gmail.com on 22 Jun 2011 at 5:44

GoogleCodeExporter commented 8 years ago 
sorry but i can't find any help in the faq

the driver has been installed correctly (no ! in hardware manager)

Original comment by st....@web.de on 22 Jun 2011 at 5:48

GoogleCodeExporter commented 8 years ago 
no, it has not installed correctly.

Original comment by dogb...@gmail.com on 22 Jun 2011 at 6:01

GoogleCodeExporter commented 8 years ago 
but how to do it right?? I can only use the setup.exe or what should i do?! 
I've read the FAQ again but i can't any help for this problem.... sorry to razz 
you but plz help me :)

PS: Great Project!

Original comment by st....@web.de on 22 Jun 2011 at 6:08

GoogleCodeExporter commented 8 years ago 
please install the driver manually (device manager -> update driver -> manual 
mode -> point to inf -> install)

Original comment by dogb...@gmail.com on 22 Jun 2011 at 6:10

GoogleCodeExporter commented 8 years ago 
see here my device manager....there's no problem?!

Original comment by st....@web.de on 22 Jun 2011 at 6:11

Attachments:

GoogleCodeExporter commented 8 years ago 
@ comment 5

it says it has been the latest driver already installed

Original comment by st....@web.de on 22 Jun 2011 at 6:14

GoogleCodeExporter commented 8 years ago 
oh, then you probably have to run cmicontrol.exe as administrator

Original comment by dogb...@gmail.com on 22 Jun 2011 at 6:16

GoogleCodeExporter commented 8 years ago 
with admin-rights it doesn't work, too

Original comment by st....@web.de on 22 Jun 2011 at 6:21

GoogleCodeExporter commented 8 years ago 
can you try to remove the driver and reinstall it? The basic procedure is 
outlined here:

http://code.google.com/p/cmediadrivers/wiki/FAQ#Why_does_a_message_box_with_the_
title_"_()"_and_the_te

Original comment by dogb...@gmail.com on 22 Jun 2011 at 6:27

GoogleCodeExporter commented 8 years ago 
so... after a few times reinstalled the driver  now it works, no ideo why but 
the control panel is starting now correctly!

But to enable the SPDIF IN takes no effekt...

(Remember i wan't to activate the SPDIF IN and this signal should be outputed 
over the analog outputs of the soundcard / Source is a Sat Receiver (dBox 2))

Original comment by st....@web.de on 22 Jun 2011 at 6:32

GoogleCodeExporter commented 8 years ago 
you need to stop/start the device in the device manager for the setting to be 
activated - it's a design flaw of the driver model that I haven't bothered to 
find a workaround for.

Original comment by dogb...@gmail.com on 22 Jun 2011 at 7:10