search

shantanubhadoria / perl-Device-LSM303DLHC

Device::SMBus interface to LSM303DLHC Accelerometer and Magnetometer.
https://metacpan.org/pod/Device::LSM303DLHC
1 stars 0 forks source link

sensors not responding to andoird sensor box #1

Closed abhinavinforce closed 10 years ago

abhinavinforce commented 10 years ago

When I go for adb shell I can see the drivers registered successfully but I could'nt see anything on the app. I'll look forward for your response. Please help me out

shantanubhadoria commented 10 years ago

Can you give me dome more details about the operating environment and what you are trying to achieve? Thanks

abhinavinforce commented 10 years ago

Actually i'm trying to bring up the sensors on my development board, its based on linux platform with kernel version as 3.4 with 4.2.1 JB on it.

shantanubhadoria commented 10 years ago

Ah ok, Can you paste some logs here which dev board are you using? On 22 Nov 2013 12:10, "abhinavinforce" notifications@github.com wrote:

Actually i'm trying to bring up the sensors on my development board, its based on linux platform with kernel version as 3.4 with 4.2.1 JB on it.

— Reply to this email directly or view it on GitHubhttps://github.com/shantanubhadoria/Device-LSM303DLHC/issues/1#issuecomment-29047660 .

abhinavinforce commented 10 years ago

Its SYS6440.. ya sure...

and it has 4.1.2 JB and not 4.2.1....that was by mistake

<6>[ 0.000000] Booting Linux on physical CPU 0 <6>[ 0.000000] Initializing cgroup subsys cpu <5>[ 0.000000] Linux version 3.4.0-g0f0fed7-00049-g5b325f1-dirty (abhinav@inforce) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #3 SMP PREEMPT Tue Nov 12 16:24:23 IST 2013 <4>[ 0.000000] CPU: ARMv7 Processor [511f06f0] revision 0 (ARMv7), cr=10c5387d <4>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache <4>[ 0.000000] Machine: QCT APQ8064 CDP <2>[ 0.000000] Truncating memory at 0x90000000 to fit in 32-bit physical address space <6>[ 0.000000] memory pool 3 (start fe8ff000 size 1700000) initialized <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc <6>[ 0.000000] socinfo_init: v7, id=109, ver=2.0, raw_id=1808, raw_ver=1808, hw_plat=1, hw_plat_ver=65536 <6>[ 0.000000] accessory_chip=0, hw_plat_subtype=0, pmic_model=18, pmic_die_revision=4 <7>[ 0.000000] On node 0 totalpages: 490751 <7>[ 0.000000] Normal zone: 1746 pages used for memmap <7>[ 0.000000] Normal zone: 0 pages reserved <7>[ 0.000000] Normal zone: 169774 pages, LIFO batch:31 <7>[ 0.000000] HighMem zone: 2858 pages used for memmap <7>[ 0.000000] HighMem zone: 316373 pages, LIFO batch:31 <6>[ 0.000000] allocating 25100288 bytes at c24d2000 (826d2000 physical) for fb <6>[ 0.000000] PERCPU: Embedded 9 pages/cpu @c3cc5000 s16384 r8192 d12288 u36864 <7>[ 0.000000] pcpu-alloc: s16384 r8192 d12288 u36864 alloc=9*4096 <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 486147 <5>[ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x3F ehci-hcd.park=3 androidboot.emmc=true androidboot.serialno=92149c androidboot.baseband=apq <6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 0.000000] Memory: 140MB 60MB 7MB 254MB 1455MB = 1916MB total <5>[ 0.000000] Memory: 1901628k/1985596k available, 61376k reserved, 1276924K highmem <5>[ 0.000000] Virtual kernel memory layout: <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) <5>[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) <5>[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) <5>[ 0.000000] .text : 0xc0008000 - 0xc0b97834 (11839 kB) <5>[ 0.000000] .init : 0xc0c00000 - 0xc0d04000 (1040 kB) <5>[ 0.000000] .data : 0xc0d04000 - 0xc0e8e218 (1577 kB) <5>[ 0.000000] .bss : 0xc0e8e23c - 0xc10f2e20 (2451 kB) <6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] Preemptible hierarchical RCU implementation. <6>[ 0.000000] NR_IRQS:1177 <6>[ 0.000000] kmemleak: Kernel memory leak detector disabled <6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 131084001ms <6>[ 0.000000] Console: colour dummy device 80x30 <6>[ 0.150251] Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67671) <6>[ 0.150282] pid_max: default: 32768 minimum: 301 <6>[ 0.150770] Mount-cache hash table entries: 512 <6>[ 0.152632] Initializing cgroup subsys debug <6>[ 0.152662] Initializing cgroup subsys cpuacct <6>[ 0.152662] Initializing cgroup subsys freezer <6>[ 0.152723] CPU: Testing write buffer coherency: ok <6>[ 0.153456] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.153486] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available <6>[ 0.153639] Setting up static identity map for 0x809ce4b0 - 0x809ce538 <6>[ 0.156874] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.159072] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 <6>[ 0.161422] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 <6>[ 0.161819] Brought up 4 CPUs <6>[ 0.161819] SMP: Total of 4 processors activated (54.13 BogoMIPS). <6>[ 0.180161] dummy: <6>[ 0.180802] NET: Registered protocol family 16 <3>[ 0.181504] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver <6>[ 0.184373] meminfo_init: smem ram ptable found: ver: 0 len: 5 <6>[ 0.184404] Found 1 memory banks grouped into 8 memory regions <6>[ 0.184770] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio <6>[ 0.186326] socinfo_init: v7, id=109, ver=2.0, raw_id=1808, raw_ver=1808, hw_plat=1, hw_plat_ver=65536 <6>[ 0.186357] accessory_chip=0, hw_plat_subtype=0, pmic_model=18, pmic_die_revision=4 <6>[ 0.186387] msm_rpm_init: RPM firmware 3.0.16842914 <3>[ 0.214802] msm_rpm_get_status(): Status id 433 not defined for target <3>[ 0.214832] msm_rpm_get_status(): Status id 433 not defined for target <3>[ 0.214832] msm_rpm_get_status(): Status id 433 not defined for target <3>[ 0.214863] msm_rpm_get_status(): Status id 433 not defined for target <3>[ 0.214863] msm_rpm_get_status(): Status id 433 not defined for target <3>[ 0.214863] msm_rpm_get_status(): Status id 433 not defined for target <3>[ 0.214893] msm_rpm_get_status(): Status id 433 not defined for target <3>[ 0.214893] msm_rpm_get_status(): Status id 433 not defined for target <6>[ 0.239829] gpio_vreg_probe: id=202, name=ext_5v, gpio=202, gpio_label=ext_5v_en <6>[ 0.240317] gpio_vreg_probe: id=203, name=ext_mpp8, gpio=203, gpio_label=ext_mpp8_en <6>[ 0.240958] gpio_vreg_probe: id=77, name=ext_3p3v, gpio=77, gpio_label=ext_3p3v_en <6>[ 0.241294] pm8921_probe: PMIC revision 1: F4 <6>[ 0.241324] pm8921_probe: PMIC revision 2: 06 <6>[ 0.241324] pm8921_probe: PMIC version: PM8921 rev 3.0 <6>[ 0.241355] pm8921_probe: PMIC Restart Reason: Triggered from CHG (usb charger insertion) <6>[ 0.243033] gpiochip_add: registered GPIOs 152 to 195 on device: pm-gpio <6>[ 0.243522] pm_gpio_probe: OK: base=152, ngpio=44 <6>[ 0.243888] gpiochip_add: registered GPIOs 196 to 207 on device: pm8xxx-mpp <6>[ 0.243979] pm8xxx_mpp_probe: OK: base=196, ngpio=12 <6>[ 0.248039] pm8821_probe: PMIC revision 1: PM8821 rev F3 <6>[ 0.248069] pm8821_probe: PMIC revision 2: PM8821 rev 0B <6>[ 0.248069] pm8821_probe: PMIC version: PM8821 ver 2.1 <6>[ 0.248924] gpiochip_add: registered GPIOs 208 to 211 on device: pm8xxx-mpp <6>[ 0.248985] pm8xxx_mpp_probe: OK: base=208, ngpio=4 <6>[ 0.249931] gpio_vreg_probe: id=174, name=ext_ts_sw, gpio=174, gpio_label=ext_ts_sw_en <6>[ 0.251732] saw_probe: id=0, name=8921_s5 <6>[ 0.252220] saw_probe: id=1, name=8921_s6 <6>[ 0.252769] saw_probe: id=2, name=8821_s0 <6>[ 0.253227] saw_probe: id=3, name=8821_s1 <6>[ 0.272394] gpio_vreg_probe: id=199, name=ext_sata_pwr, gpio=198, gpio_label=ext_sata_pwr_en <4>[ 0.272577] apq8064_cdp_init: gpio_request(PM8921_GPIO_PM_TO_SYS(43),"WLAN_RST#") returned 0 <4>[ 0.272760] apq8064_cdp_init: gpio_export(PM8921_GPIO_PM_TO_SYS(43), true) returned 0 <4>[ 0.272791] apq8064_cdp_init: gpio_direction_output(PM8921_GPIO_PM_TO_SYS(43), 0) returned 0 <4>[ 0.275110] ------------[ cut here ]------------ <4>[ 0.275141] WARNING: at /home/sys6440/src/kernel/arch/arm/mach-msm/subsystem_restart.c:799 subsys_restart_init+0xe0/0x148() <4>[ 0.275171] Modules linked in: <4>[ 0.275202] [](unwind_backtrace+0x0/0x11c) from [](warn_slowpath_common+0x4c/0x64) <4>[ 0.275232] [](warn_slowpath_common+0x4c/0x64) from [](warn_slowpath_null+0x18/0x1c) <4>[ 0.275263] [](warn_slowpath_null+0x18/0x1c) from [](subsys_restart_init+0xe0/0x148) <4>[ 0.275293] [](subsys_restart_init+0xe0/0x148) from [](do_one_initcall+0x90/0x160) <4>[ 0.275324] [](do_one_initcall+0x90/0x160) from [](kernel_init+0xec/0x1a8) <4>[ 0.275354] [](kernel_init+0xec/0x1a8) from [](kernel_thread_exit+0x0/0x8) <4>[ 0.275385] ---[ end trace da227214a82491b7 ]--- <6>[ 0.282893] sps:BAM 0x12244000 enabled: ver:0x5, number of pipes:20 <6>[ 0.282923] sps:BAM 0x12244000 is registered. <6>[ 0.283412] sps:sps is ready. <6>[ 0.330688] msm_pcie_setup: link initialized <6>[ 0.331115] PCI host bridge to bus 0000:00 <6>[ 0.331146] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff] <7>[ 0.331207] pci 0000:00:00.0: [17cb:0101] type 01 class 0xff0000 <7>[ 0.331420] pci 0000:00:00.0: supports D1 <7>[ 0.331420] pci 0000:00:00.0: PME# supported from D0 D1 D3hot <6>[ 0.331542] PCI: bus0: Fast back to back transfers disabled <7>[ 0.331725] pci 0000:01:00.0: [1969:1083] type 00 class 0x020000 <7>[ 0.331786] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x0003ffff 64bit] <7>[ 0.331848] pci 0000:01:00.0: reg 18: [io 0x0000-0x007f] <7>[ 0.332092] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 0.332183] PCI: bus1: Fast back to back transfers disabled <6>[ 0.332916] pci 0000:00:00.0: BAR 8: assigned [mem 0x10000000-0x100fffff] <6>[ 0.332946] pci 0000:00:00.0: BAR 7: can't assign io (size 0x1000) <6>[ 0.332946] pci 0000:01:00.0: BAR 0: assigned [mem 0x10000000-0x1003ffff 64bit] <6>[ 0.332977] pci 0000:01:00.0: BAR 2: can't assign io (size 0x80) <6>[ 0.333007] pci 0000:00:00.0: PCI bridge to [bus 01-01] <6>[ 0.333038] pci 0000:00:00.0: bridge window [mem 0x10000000-0x100fffff] <4>[ 0.333068] PCI: enabling device 0000:00:00.0 (0140 -> 0143) <6>[ 0.383396] bio: create slab at 0 <6>[ 0.384343] vgaarb: loaded <6>[ 0.384587] ION heap vmalloc created <6>[ 0.384678] ION heap mm created at a0000000 with size 3800000 <6>[ 0.384709] ION heap mm_fw created at 9fe00000 with size 1e0000 <6>[ 0.384739] ION heap mfc created at a3800000 with size 2000 <6>[ 0.384770] ION heap iommu created <6>[ 0.384861] ION heap qsecom created at fe907000 with size 780000 <6>[ 0.384922] ION heap audio created at ff087000 with size 4cf000 <5>[ 0.386387] pm8xxx_pwm_probe: OK <5>[ 0.387334] SCSI subsystem initialized <7>[ 0.387608] libata version 3.00 loaded. <6>[ 0.387822] platform msm_slim_ctrl.1: Driver msm_slim_ctrl requests probe deferral <6>[ 0.388310] usbcore: registered new interface driver usbfs <6>[ 0.388432] usbcore: registered new interface driver hub <6>[ 0.388615] usbcore: registered new device driver usb <6>[ 0.388829] Linux media interface: v0.10 <6>[ 0.388890] Linux video capture interface: v2.00 <7>[ 0.389806] Registered led device: led:red <6>[ 0.391515] msm_iommu_dev: device vpe mapped at f0600000, with 2 ctx banks <6>[ 0.391698] msm_iommu_dev: device mdp0 mapped at f0800000, with 2 ctx banks <6>[ 0.391851] msm_iommu_dev: device mdp1 mapped at f0a00000, with 2 ctx banks <6>[ 0.392064] msm_iommu_dev: device rot mapped at f0c00000, with 2 ctx banks <6>[ 0.392217] msm_iommu_dev: device ijpeg mapped at f0e00000, with 2 ctx banks <6>[ 0.392369] msm_iommu_dev: device vfe mapped at f1000000, with 2 ctx banks <6>[ 0.392553] msm_iommu_dev: device vcodec_a mapped at f1200000, with 2 ctx banks <6>[ 0.392705] msm_iommu_dev: device vcodec_b mapped at f1400000, with 2 ctx banks <6>[ 0.392888] msm_iommu_dev: device gfx3d mapped at f1600000, with 3 ctx banks <6>[ 0.393071] msm_iommu_dev: device jpegd mapped at f1800000, with 2 ctx banks <6>[ 0.393224] msm_iommu_dev: device gfx3d1 mapped at f1a00000, with 3 ctx banks <6>[ 0.393407] msm_iommu_dev: device vcap mapped at f1c00000, with 2 ctx banks <6>[ 0.393956] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0 <6>[ 0.394170] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1 <6>[ 0.394384] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0 <6>[ 0.394597] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1 <6>[ 0.394903] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0 <6>[ 0.395116] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1 <6>[ 0.395330] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0 <6>[ 0.395513] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1 <6>[ 0.395727] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0 <6>[ 0.395910] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1 <6>[ 0.396154] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0 <6>[ 0.396337] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1 <6>[ 0.396551] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0 <6>[ 0.396795] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1 <6>[ 0.397039] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0 <6>[ 0.397314] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0 <6>[ 0.397649] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1 <6>[ 0.397955] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0 <6>[ 0.398229] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1 <6>[ 0.398504] msm_iommu_ctx msm_iommu_ctx.19: context gfx3d1_user using bank 0 <6>[ 0.398779] msm_iommu_ctx msm_iommu_ctx.20: context gfx3d1_priv using bank 1 <6>[ 0.398962] msm_iommu_ctx msm_iommu_ctx.21: context vcap_vc using bank 0 <6>[ 0.399236] msm_iommu_ctx msm_iommu_ctx.22: context vcap_vp using bank 1 <6>[ 0.399481] Advanced Linux Sound Architecture Driver Version 1.0.25. <6>[ 0.400366] Bluetooth: Core ver 2.16 <6>[ 0.400488] NET: Registered protocol family 31 <6>[ 0.400518] Bluetooth: HCI device and connection manager initialized <6>[ 0.400518] Bluetooth: HCI socket layer initialized <6>[ 0.400549] Bluetooth: L2CAP socket layer initialized <6>[ 0.400915] Bluetooth: SCO socket layer initialized <6>[ 0.401587] Switching to clocksource gp_timer <6>[ 0.449473] NET: Registered protocol family 2 <6>[ 0.450236] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) <6>[ 0.454600] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) <6>[ 0.463268] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) <6>[ 0.464123] TCP: Hash tables configured (established 131072 bind 65536) <6>[ 0.464153] TCP: reno registered <6>[ 0.464275] UDP hash table entries: 512 (order: 2, 24576 bytes) <6>[ 0.464459] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes) <6>[ 0.464916] NET: Registered protocol family 1 <6>[ 0.465557] RPC: Registered named UNIX socket transport module. <6>[ 0.465557] RPC: Registered udp transport module. <6>[ 0.465588] RPC: Registered tcp transport module. <6>[ 0.465588] RPC: Registered tcp NFSv4.1 backchannel transport module. <7>[ 0.465649] PCI: CLS 64 bytes, default 64 <6>[ 0.466046] Trying to unpack rootfs image as initramfs... <6>[ 0.493636] Freeing initrd memory: 324K <6>[ 0.495040] Detected 9 counters on the L2CC PMU. <6>[ 0.496658] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot <6>[ 0.498306] pil_riva pil_riva: using secure boot <6>[ 0.500839] pil_dsps pil_dsps: using secure boot <6>[ 0.502151] pil_gss pil_gss: using secure boot <3>[ 0.504745] smd_channel_probe_worker: allocation table not initialized <6>[ 0.513383] NET: Registered protocol family 27 <6>[ 0.518937] lpass_fatal_init: lpass SSR driver init'ed. <6>[ 0.519395] wcnss_8960: module initialized <6>[ 0.520219] gss_8064_init: gss fatal driver init'ed. <6>[ 0.521104] acpuclk-8064 acpuclk-8064: SPEED BIN: 1 <6>[ 0.521135] acpuclk-8064 acpuclk-8064: ACPU PVS: 2 <6>[ 0.524614] acpuclk-8064 acpuclk-8064: CPU0: 15 frequencies supported <6>[ 0.524645] acpuclk-8064 acpuclk-8064: CPU1: 15 frequencies supported <6>[ 0.524675] acpuclk-8064 acpuclk-8064: CPU2: 15 frequencies supported <6>[ 0.524706] acpuclk-8064 acpuclk-8064: CPU3: 15 frequencies supported <5>[ 0.528918] msm_rpm_log_probe: OK <1>[ 0.538074] L2 Error detected! <1>[ 0.538074] L2ESR = 0x00010002 <1>[ 0.538074] L2ESYNR0 = 0x7a00445f <1>[ 0.538104] L2ESYNR1 = 0x0247de7b <1>[ 0.538104] L2EAR0 = 0x00002700 <1>[ 0.538104] L2EAR1 = 0x00000000 <1>[ 0.538135] CPU bitmap = 0x1 <1>[ 0.538135] L2 master port slave error <4>[ 0.538135] ------------[ cut here ]------------ <4>[ 0.538196] WARNING: at /home/sys6440/src/kernel/arch/arm/mach-msm/cache_erp.c:412 msm_l2_erp_irq+0x1d0/0x260() <4>[ 0.538196] L2 master port error detected <4>[ 0.538226] Modules linked in: <4>[ 0.538257] [](unwind_backtrace+0x0/0x11c) from [](warn_slowpath_common+0x4c/0x64) <4>[ 0.538287] [](warn_slowpath_common+0x4c/0x64) from [](warn_slowpath_fmt+0x2c/0x3c) <4>[ 0.538318] [](warn_slowpath_fmt+0x2c/0x3c) from [](msm_l2_erp_irq+0x1d0/0x260) <4>[ 0.538348] [](msm_l2_erp_irq+0x1d0/0x260) from [](handle_irq_event_percpu+0xb0/0x290) <4>[ 0.538379] [](handle_irq_event_percpu+0xb0/0x290) from [](handle_irq_event+0x3c/0x5c) <4>[ 0.538409] [](handle_irq_event+0x3c/0x5c) from [](handle_fasteoi_irq+0xdc/0x148) <4>[ 0.538440] [](handle_fasteoi_irq+0xdc/0x148) from [](generic_handle_irq+0x30/0x44) <4>[ 0.538470] [](generic_handle_irq+0x30/0x44) from [](handle_IRQ+0x7c/0xc0) <4>[ 0.538501] [](handle_IRQ+0x7c/0xc0) from [](gic_handle_irq+0x94/0x110) <4>[ 0.538531] [](gic_handle_irq+0x94/0x110) from [](__irq_svc+0x40/0x70) <4>[ 0.538562] Exception stack(0xc0d05f60 to 0xc0d05fa8) <4>[ 0.538562] 5f60: ffffffed 00000000 02fc5000 c000f0c8 c0d04000 c0e8e308 c0808d24 c0d4d5ac <4>[ 0.538593] 5f80: 8020406a 511f06f0 00000000 00000000 00000001 c0d05fa8 c000f0e0 c000f438 <4>[ 0.538593] 5fa0: a0000013 ffffffff <4>[ 0.538623] [](__irq_svc+0x40/0x70) from [](cpu_idle+0x9c/0xf0) <4>[ 0.538654] [](cpu_idle+0x9c/0xf0) from [](rest_init+0x88/0xa0) <4>[ 0.538715] [](rest_init+0x88/0xa0) from [](start_kernel+0x44c/0x4b8) <4>[ 0.538715] [](start_kernel+0x44c/0x4b8) from [<8020803c>](0x8020803c) <4>[ 0.538745] ---[ end trace da227214a82491b8 ]--- <6>[ 0.540210] usbcore: registered new interface driver hsic_sysmon <4>[ 0.890828] highmem bounce pool size: 64 pages <5>[ 0.918419] NFS: Registering the id_resolver key type <6>[ 0.922752] fuse init (API version 7.18) <6>[ 0.924156] msgmni has been set to 1220 <4>[ 0.925072] cryptomgr_test used greatest stack depth: 7088 bytes left <6>[ 0.929894] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>[ 0.929925] io scheduler noop registered <6>[ 0.929955] io scheduler deadline registered <6>[ 0.930535] io scheduler cfq registered (default) <6>[ 0.945795] mipi_dsi base phy_addr = 0x4700000 virt = 0xf2000000 <6>[ 0.945856] mmss_sfpb base phy_addr = 0x5700000,virt = 0xf00b8000 <6>[ 0.947779] setting pdata->panel_info.fb_num to 3. type: 8 <6>[ 0.948908] mdp4_dsi_vsync_init: ndx=0 <6>[ 0.953334] FrameBuffer[0] 480x864 size=4976640 bytes is registered successfully! <7>[ 0.954494] Registered led device: lcd-backlight <4>[ 0.956569] hdmi_msm hdmi_msm.1: WARNING: HDCP disabled <6>[ 0.956996] setting pdata->panel_info.fb_num to 1. type: 7 <6>[ 0.957942] mdp4_dtv_vsync_init: ndx=0 <6>[ 0.959255] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully! <3>[ 0.960262] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group eeefca08 <6>[ 0.960354] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Disabled <6>[ 0.961605] setting pdata->panel_info.fb_num to 1. type: 10 <3>[ 0.962093] Inside writeback_driver_init <3>[ 0.962582] Inside writeback_probe <6>[ 0.963833] FrameBuffer[2] 1280x720 size=0 bytes is registered successfully! <6>[ 0.967282] <6>[ 0.967312] msm_vidc_enc: Inside vid_enc_init() <6>[ 0.967831] <6>[ 0.967831] msm_vidc_enc: Inside vid_enc_vcd_init() <6>[ 0.971799] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART <6>[ 0.972592] msm_serial_hs module loaded <6>[ 0.973050] msm_serial_hsl: detected port #1 <6>[ 0.973325] msm_serial_hsl.1: ttyHSL1 at MMIO 0x12450000 (irq = 225) is a MSM <6>[ 0.973966] msm_serial_hsl: detected port #0 <6>[ 0.974240] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16640000 (irq = 190) is a MSM <6>[ 0.974454] msm_serial_hsl: console setup on port #0 <6>[ 2.645872] console [ttyHSL0] enabled <6>[ 2.649626] msm_serial_hsl: driver initialized <6>[ 2.656249] msm_rotator_probe: rotator_hw_revision=2 <6>[ 2.664459] diagchar initialized now <6>[ 2.669067] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU <6>[ 2.690431] brd: module loaded <6>[ 2.698489] loop: module loaded <4>[ 2.701175] i2c-core: driver [isa1200] using legacy suspend method <4>[ 2.706821] i2c-core: driver [isa1200] using legacy resume method <4>[ 2.715305] i2c-core: driver [tabla-i2c-core] using legacy suspend method <4>[ 2.721104] i2c-core: driver [tabla-i2c-core] using legacy resume method <6>[ 2.730291] SCSI Media Changer driver v0.25 <4>[ 2.739630] ahci ahci.0: forcing PORTS_IMPL to 0x1 <6>[ 2.743567] ahci ahci.0: AHCI 0001.0300 32 slots 1 ports 1.5 Gbps 0x1 impl platform mode <6>[ 2.751472] ahci ahci.0: flags: ncq sntf pm led clo only pmp pio slum part ccc apst <6>[ 2.760933] scsi0 : ahci_platform <6>[ 2.763741] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 241 <6>[ 2.771982] spi_qsd spi_qsd.0: master is unqueued, this is deprecated <6>[ 2.779856] tun: Universal TUN/TAP device driver, 1.6 <6>[ 2.783915] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com <6>[ 2.790202] rmnet_init: BAM devices[8] <6>[ 2.803937] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). <6>[ 2.812604] CSLIP: code copyright 1989 Regents of the University of California. <6>[ 2.819990] wcnss_wlan probed in built-in mode <6>[ 2.826949] usbcore: registered new interface driver asix <6>[ 2.831466] usbcore: registered new interface driver cdc_ether <6>[ 2.837295] usbcore: registered new interface driver net1080 <6>[ 2.842972] usbcore: registered new interface driver cdc_subset <6>[ 2.848771] usbcore: registered new interface driver zaurus <6>[ 2.854570] usbcore: registered new interface driver cdc_ncm <6>[ 2.860003] usbcore: registered new interface driver rmnet_usb <6>[ 2.866625] rmnet usb ctrl Initialized. <6>[ 2.869708] msm_otg msm_otg: msm_otg probe <3>[ 2.873706] msm_otg msm_otg: failed to get phy_clk <6>[ 2.878467] msm_otg msm_otg: OTG regs = f00e2000 <6>[ 2.886983] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 2.895986] msm_ehci_host msm_ehci_host.0: phy_reset: success <6>[ 3.002411] msm_ehci_host msm_ehci_host.0: Qualcomm EHCI Host Controller <6>[ 3.008393] msm_ehci_host msm_ehci_host.0: new USB bus registered, assigned bus number 1 <6>[ 3.042484] msm_ehci_host msm_ehci_host.0: irq 220, io mem 0x12520000 <6>[ 3.062383] msm_ehci_host msm_ehci_host.0: USB 2.0 started, EHCI 1.00 <6>[ 3.067999] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 <6>[ 3.074622] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 3.081794] usb usb1: Product: Qualcomm EHCI Host Controller <6>[ 3.087471] usb usb1: Manufacturer: Linux 3.4.0-g0f0fed7-00049-g5b325f1-dirty ehci_hcd <6>[ 3.095345] usb usb1: SerialNumber: msm_ehci_host.0 <6>[ 3.100869] hub 1-0:1.0: USB hub found <6>[ 3.103982] hub 1-0:1.0: 1 port detected <6>[ 3.111613] msm_ehci_host msm_ehci_host.1: phy_reset: success <6>[ 3.112498] ata1: SATA link down (SStatus 0 SControl 300) <6>[ 3.222432] msm_ehci_host msm_ehci_host.1: Qualcomm EHCI Host Controller <6>[ 3.228383] msm_ehci_host msm_ehci_host.1: new USB bus registered, assigned bus number 2 <6>[ 3.262414] msm_ehci_host msm_ehci_host.1: irq 247, io mem 0x12530000 <6>[ 3.282405] msm_ehci_host msm_ehci_host.1: USB 2.0 started, EHCI 1.00 <6>[ 3.287959] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 <6>[ 3.294643] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 3.301815] usb usb2: Product: Qualcomm EHCI Host Controller <6>[ 3.307553] usb usb2: Manufacturer: Linux 3.4.0-g0f0fed7-00049-g5b325f1-dirty ehci_hcd <6>[ 3.315397] usb usb2: SerialNumber: msm_ehci_host.1 <6>[ 3.320830] hub 2-0:1.0: USB hub found <6>[ 3.324004] hub 2-0:1.0: 1 port detected <6>[ 3.329131] usbcore: registered new interface driver cdc_acm <6>[ 3.333831] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters <6>[ 3.341767] Initializing USB Mass Storage driver... <6>[ 3.346833] usbcore: registered new interface driver usb-storage <6>[ 3.352662] USB Mass Storage support registered. <6>[ 3.357301] usbcore: registered new interface driver ums-alauda <6>[ 3.363253] usbcore: registered new interface driver ums-cypress <6>[ 3.369204] usbcore: registered new interface driver ums-datafab <6>[ 3.375217] usbcore: registered new interface driver ums-freecom <6>[ 3.381168] usbcore: registered new interface driver ums-isd200 <6>[ 3.387120] usbcore: registered new interface driver ums-jumpshot <6>[ 3.393224] usbcore: registered new interface driver ums-karma <6>[ 3.398992] usbcore: registered new interface driver ums-onetouch <6>[ 3.405096] usbcore: registered new interface driver ums-sddr09 <6>[ 3.410956] usbcore: registered new interface driver ums-sddr55 <6>[ 3.416908] usbcore: registered new interface driver ums-usbat <6>[ 3.422493] usb 1-1: new high-speed USB device number 2 using msm_ehci_host <6>[ 3.429909] usbcore: registered new interface driver usbserial <6>[ 3.435434] usbserial: USB Serial Driver core <6>[ 3.439829] usbcore: registered new interface driver qc_csvt <6>[ 3.445475] USB Serial support registered for qc_csvt <6>[ 3.450480] usbcore: registered new interface driver usb_ehset_test <6>[ 3.456767] usbcore: registered new interface driver diag_bridge <6>[ 3.462810] usbcore: registered new interface driver mdm_bridge <6>[ 3.470196] usbcore: registered new interface driver ks_bridge <6>[ 3.475080] ksb_init: init done <6>[ 3.478864] msm_otg msm_otg: phy_reset: success <6>[ 3.483869] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32 <6>[ 3.489058] mbim_init: initialize 1 instances <6>[ 3.493331] mbim_init: Initialized 1 ports <6>[ 3.502456] rndis_qc_init: initialize rndis QC instance <6>[ 3.507889] android_usb gadget: Mass Storage Function, version: 2009/09/11 <6>[ 3.513840] android_usb gadget: Number of LUNs=1 <6>[ 3.518358] lun0: LUN: removable file: (no medium) <6>[ 3.524401] android_usb gadget: android_usb ready <6>[ 3.529711] mousedev: PS/2 mouse device common for all mice <6>[ 3.536700] usbcore: registered new interface driver xpad <6>[ 3.572989] usb 1-1: New USB device found, idVendor=0424, idProduct=2517 <6>[ 3.578666] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 <6>[ 3.586571] hub 1-1:1.0: USB hub found <6>[ 3.589714] hub 1-1:1.0: 7 ports detected <6>[ 4.053349] himax8526a 3-004a: input_set_abs_params: mix_x 0, max_x 480, min_y 0, max_y 800 <6>[ 4.060705] himax8526a 3-004a: Register input device <6>[ 4.066351] input: himax-touchscreen as /devices/virtual/input/input0 <6>[ 4.072730] himax8526a 3-004a: irq enabled at qpio: 295 <6>[ 4.077277] himax8526a 3-004a: Successful registration <6>[ 4.083564] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-pwrkey/input/input1 <6>[ 4.093819] lis3dh_acc accelerometer driver: init <4>[ 4.097634] i2c-core: driver [lis3dh_acc] using legacy suspend method <4>[ 4.104013] i2c-core: driver [lis3dh_acc] using legacy resume method <6>[ 4.112559] using rtc device, pm8xxx_rtc, for alarms <6>[ 4.116404] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0 <6>[ 4.124156] i2c /dev entries driver <6>[ 4.128399] lirc_dev: IR Remote Control driver registered, major 237 <6>[ 4.133923] IR NEC protocol handler initialized <6>[ 4.138348] IR RC5(x) protocol handler initialized <6>[ 4.143171] IR RC6 protocol handler initialized <6>[ 4.147657] IR JVC protocol handler initialized <6>[ 4.152174] IR Sony protocol handler initialized <6>[ 4.156874] IR RC5 (streamzap) protocol handler initialized <6>[ 4.162307] IR SANYO protocol handler initialized <6>[ 4.167037] IR MCE Keyboard/mouse protocol handler initialized <6>[ 4.172867] IR LIRC bridge handler initialized <6>[ 4.179063] usbcore: registered new interface driver uvcvideo <6>[ 4.183854] USB Video Class driver (1.1.1) <3>[ 4.191820] 8921_l8: requested voltage range [2800000, 2850000] does not fit within constraints: [3300000, 3300000] <3>[ 4.201312] msm_camera_config_vreg: cam_vana set voltage failed <3>[ 4.207385] msm_sensor_bayer_power_up: regulator on failed <3>[ 4.212726] msm_sensor_bayer_i2c_probe imx091 power up failed <3>[ 4.219471] 8921_l8: requested voltage range [2800000, 2850000] does not fit within constraints: [3300000, 3300000] <3>[ 4.228963] msm_camera_config_vreg: cam_vana set voltage failed <3>[ 4.235342] msm_sensor_power_up: regulator on failed <3>[ 4.239768] msm_sensor_i2c_probe imx074 power up failed <3>[ 4.246390] 8921_l8: requested voltage range [2800000, 2850000] does not fit within constraints: [3300000, 3300000] <3>[ 4.255943] msm_camera_config_vreg: cam_vana set voltage failed <3>[ 4.262047] msm_sensor_power_up: regulator on failed <3>[ 4.266748] msm_sensor_i2c_probe s5k3l1yx power up failed <3>[ 4.272516] OV5640: Enter: Power Up <3>[ 4.326781] OV5640: Exit: Power Up <3>[ 4.329406] qup_i2c qup_i2c.4: QUP: I2C status flags :0x1363c8, irq:185 <3>[ 4.335998] qup_i2c qup_i2c.4: I2C slave addr:0x3c not connected <3>[ 4.341950] msm_sensor_match_id: ov5640: read id failed <3>[ 4.347169] msm_sensor_i2c_probe ov5640_i2c_probe failed <3>[ 4.352479] OV5640: Enter: Power Down <3>[ 4.382450] OV5640: Exit: Power Down <4>[ 4.385014] ov5640: probe of 4-003c failed with error -107 <3>[ 4.391545] 8921_l8: requested voltage range [2800000, 2850000] does not fit within constraints: [3300000, 3300000] <3>[ 4.401098] msm_camera_config_vreg: cam_vana set voltage failed <3>[ 4.407172] msm_sensor_power_up: regulator on failed <3>[ 4.411933] msm_sensor_i2c_probe ov2720 power up failed <3>[ 4.417732] 8921_l8: requested voltage range [2800000, 2850000] does not fit within constraints: [3300000, 3300000] <3>[ 4.427590] msm_camera_config_vreg: cam_vana set voltage failed <3>[ 4.433786] msm_sensor_power_up: regulator on failed <3>[ 4.438425] msm_sensor_i2c_probe mt9m114 power up failed <6>[ 4.445231] msm_cam_server_request_irq IRQ Router hw is not present. <6>[ 4.450785] msm_cam_server_request_irq IRQ Router hw is not present. <6>[ 4.458690] msm_cam_server_request_irq IRQ Router hw is not present. <6>[ 4.475629] pm8xxx_tm_init_reg: pwm cntrl read reg: 0c1 <0>[ 4.500839] thermal_sys: Critical temperature reached (160 C), shutting down <4>[ 4.507279] kworker/u:1 used greatest stack depth: 6728 bytes left <6>[ 4.507370] pm8xxx_tm_probe: OK <6>[ 4.507462] pm8xxx_tm_init_reg: pwm cntrl read reg: 041 <6>[ 4.508103] pm8xxx_tm_probe: OK <6>[ 4.509476] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com <6>[ 4.509781] Bluetooth: HCI UART driver ver 2.2 <6>[ 4.509812] Bluetooth: HCI H4 protocol initialized <6>[ 4.509812] Bluetooth: HCIATH3K protocol initialized <6>[ 4.510209] Bluetooth: HCI_IBS protocol initialized <6>[ 4.552296] cpuidle: using governor ladder <6>[ 4.556172] cpuidle: using governor menu <6>[ 4.560506] mmc0: SDCC Version: 0x06000018 <6>[ 4.565817] mmc0: bam physical base=0x12402000 <6>[ 4.569235] mmc0: bam virtual base=0xf01f4000 <6>[ 4.573660] sps:BAM 0x12402000 is registered. <6>[ 4.577750] mmc0: BAM device registered. bam_handle=0xef183e00 <6>[ 4.584159] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6 <6>[ 4.591301] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130 <6>[ 4.596978] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800 <3>[ 4.602746] mmc0: No card detect facilities available <6>[ 4.610804] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1 <6>[ 4.618403] mmc0: Controller capabilities: 0x000007be <6>[ 4.623744] mmc0: 8 bit data mode enabled <6>[ 4.627315] mmc0: 4 bit data mode disabled <6>[ 4.631374] mmc0: polling status mode disabled <6>[ 4.635830] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz <6>[ 4.641324] mmc0: Slot eject status = 0 <6>[ 4.645261] mmc0: Power save feature enable = 1 <6>[ 4.649778] mmc0: SPS-BAM data transfer mode available <6>[ 4.655089] mmc1: SDCC Version: 0x06000018 <6>[ 4.666656] mmc1: bam physical base=0x12182000 <6>[ 4.675293] mmc1: bam virtual base=0xf0334000 <6>[ 4.678681] sps:BAM 0x12182000 is registered. <6>[ 4.687929] mmc1: BAM device registered. bam_handle=0xef190400 <6>[ 4.703403] sps:BAM 0x12182000 enabled: ver:0x5, number of pipes:6 <6>[ 4.735571] mmc1: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 128 <6>[ 4.746284] mmc1: Qualcomm MSM SDCC-DML at 0x0000000012180800 <6>[ 4.754188] mmc1: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,314 dma -1 dmacrcri -1 <6>[ 4.761696] mmc1: Controller capabilities: 0x000007be <6>[ 4.766793] mmc1: 8 bit data mode disabled <6>[ 4.770822] mmc1: 4 bit data mode enabled <6>[ 4.774851] mmc1: polling status mode disabled <6>[ 4.779246] mmc1: MMC clock 400000 -> 192000000 Hz, PCLK 0 Hz <6>[ 4.785014] mmc0: new high speed DDR MMC card at address 0001 <6>[ 4.785014] mmc1: Slot eject status = 1 <6>[ 4.785045] mmc1: Power save feature enable = 1 <6>[ 4.785045] mmc1: SPS-BAM data transfer mode available <6>[ 4.785930] mmc2: SDCC Version: 0x06000018 <6>[ 4.786754] mmc2: bam physical base=0x121c2000 <6>[ 4.786784] mmc2: bam virtual base=0xf033c000 <6>[ 4.786876] sps:BAM 0x121c2000 is registered. <6>[ 4.786876] mmc2: BAM device registered. bam_handle=0xeea1a000 <6>[ 4.787425] sps:BAM 0x121c2000 enabled: ver:0x5, number of pipes:6 <6>[ 4.789531] mmc2: Qualcomm MSM SDCC-BAM at 0x00000000121c2000 irq 127 <6>[ 4.789592] mmc2: Qualcomm MSM SDCC-DML at 0x00000000121c0800 <3>[ 4.789928] mmc2: No card detect facilities available <3>[ 4.790386] msmsdcc_vreg_get_voltage: regulator_get_voltage(sdc_vdd_io) failed. rc=-22 <6>[ 4.791576] mmc2: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma -1 dmacrcri -1 <6>[ 4.791606] mmc2: Controller capabilities: 0x000007be <6>[ 4.791637] mmc2: 8 bit data mode disabled <6>[ 4.791637] mmc2: 4 bit data mode enabled <6>[ 4.791667] mmc2: polling status mode disabled <6>[ 4.791667] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz <6>[ 4.791698] mmc2: Slot eject status = 0 <6>[ 4.791698] mmc2: Power save feature enable = 1 <6>[ 4.791728] mmc2: SPS-BAM data transfer mode available <6>[ 4.793468] usbcore: registered new interface driver usbhid <6>[ 4.793499] usbhid: USB HID core driver <6>[ 4.915336] ashmem: initialized <6>[ 4.917564] mmcblk0: mmc0:0001 SEM04G 3.68 GiB <6>[ 4.917839] logger: created 256K log 'log_main' <6>[ 4.918083] logger: created 256K log 'log_events' <6>[ 4.918388] logger: created 256K log 'log_radio' <6>[ 4.918632] logger: created 256K log 'log_system' <6>[ 4.922264] coresight-tpiu coresight-tpiu.0: TPIU initialized <6>[ 4.923607] coresight-etb coresight-etb.0: ETB initialized <6>[ 4.924523] coresight-funnel coresight-funnel.0: FUNNEL initialized <6>[ 4.926110] coresight-etm coresight-etm.0: ETM: failing probe for Krait pass3 <4>[ 4.926171] coresight-etm: probe of coresight-etm.0 failed with error -22 <6>[ 4.926262] coresight-etm coresight-etm.1: ETM: failing probe for Krait pass3 <4>[ 4.926293] coresight-etm: probe of coresight-etm.1 failed with error -22 <6>[ 4.926384] coresight-etm coresight-etm.2: ETM: failing probe for Krait pass3 <4>[ 4.926415] coresight-etm: probe of coresight-etm.2 failed with error -22 <6>[ 4.926506] coresight-etm coresight-etm.3: ETM: failing probe for Krait pass3 <4>[ 4.926537] coresight-etm: probe of coresight-etm.3 failed with error -22 <4>[ 4.926934] >>Probing GYRO<< <6>[ 5.027926] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 <3>[ 5.077521] msmsdcc_vreg_get_voltage: regulator_get_voltage(sdc_vdd_io) failed. rc=-22 <3>[ 5.106760] msmsdcc_vreg_get_voltage: regulator_get_voltage(sdc_vdd_io) failed. rc=-22 <3>[ 5.133984] msmsdcc_vreg_get_voltage: regulator_get_voltage(sdc_vdd_io) failed. rc=-22 <4>[ 5.157576] mmc2: queuing unknown CIS tuple 0x01 (3 bytes) <4>[ 5.170456] mmc2: queuing unknown CIS tuple 0x1a (5 bytes) <4>[ 5.178605] mmc2: queuing unknown CIS tuple 0x1b (8 bytes) <4>[ 5.183793] mmc2: queuing unknown CIS tuple 0x14 (0 bytes) <4>[ 5.193987] mmc2: queuing unknown CIS tuple 0x80 (1 bytes) <4>[ 5.198657] mmc2: queuing unknown CIS tuple 0x81 (1 bytes) <4>[ 5.204150] mmc2: queuing unknown CIS tuple 0x82 (1 bytes) <6>[ 5.209491] mmc2: new high speed SDIO card at address 0001 <6>[ 5.524004] input: gyro_sensor as /devices/virtual/input/input2 <6>[ 5.529589] Registered sensors device: gyro_sensor <3>[ 5.533892] >>>lsm303dlhc magnetometer driver<<< <3>[ 5.538348] lsm303dlhc_mag: probe start <6>[ 5.753914] input: lsm303dlhc_mag as /devices/virtual/input/input3 <6>[ 5.759407] Registered sensors device: magnetometer <6>[ 5.972409] lsm303dlhc_mag 2-001e: lsm303dlh_mag probed <6>[ 5.976712] lsm303dlhc_acc accelerometer driver: init <6>[ 5.981718] lsm303dlhc_acc: probe start. <6>[ 5.985899] lsm303dlhc_acc: lsm303dlhc_acc_probe has set irq1 to irq: 310 mapped on gpio:22 <6>[ 5.993956] lsm303dlhc_acc: lsm303dlhc_acc_probe has set irq2 to irq: 311 mapped on gpio:23 <6>[ 6.002411] Registered sensors device: accelerometer <6>[ 6.007172] lsm303dlhc_acc: hw init start <6>[ 6.015443] lsm303dlhc_acc: hw init done <6>[ 6.019838] input: accelerometer as /devices/virtual/input/input4 <6>[ 6.026613] lsm303dlhc_acc 2-0019: lsm303dlhc_acc: probed <4>[ 6.031283] i2c-core: driver [lsm303dlhc_acc] using legacy suspend method <6>[ 6.032931] msm_ehci_host msm_ehci_host.1: EHCI USB in low power mode <4>[ 6.044376] i2c-core: driver [lsm303dlhc_acc] using legacy resume method <6>[ 6.050938] lsm303dlhc_acc_init, i2cAddDriver 0 <3>[ 6.055547] lps331ap: probe start. <3>[ 6.060125] lps331ap I2C driver registered! <6>[ 6.068426] input: barometer_sensor as /devices/virtual/input/input5 <6>[ 6.077033] Registered sensors device: barometer_sensor <6>[ 6.081275] lps331ap 2-005d: lps331ap: probed <4>[ 6.085762] i2c-core: driver [lps331ap] using legacy suspend method <4>[ 6.091866] i2c-core: driver [lps331ap] using legacy resume method <6>[ 6.099160] usbcore: registered new interface driver snd-usb-audio <6>[ 6.110697] msm_pcm_probe: dev name msm-voip-dsp <6>[ 6.117533] msm_pcm_probe: dev name msm-pcm-dsp <6>[ 6.121684] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp <6>[ 6.127025] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp <6>[ 6.133892] msm_compr_probe: dev name msm-compr-dsp <6>[ 6.138989] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa <3>[ 6.147077] msm8930_audio_init: Not the right machine type <3>[ 6.151564] msm_audio_init: Not the right machine type <6>[ 6.156752] msm_audio_init: Not APQ8064 in I2S mode <6>[ 6.163406] oprofile: using arm/armv7-krait <6>[ 6.167129] u32 classifier <6>[ 6.169265] Actions configured <6>[ 6.172745] Netfilter messages via NETLINK v0.30. <6>[ 6.177537] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) <6>[ 6.185899] ctnetlink v0.93: registering with nfnetlink. <6>[ 6.191728] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 <6>[ 6.197772] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. <6>[ 6.204455] xt_time: kernel timezone is -0000 <6>[ 6.209278] ip_tables: (C) 2000-2006 Netfilter Core Team <6>[ 6.214466] arp_tables: (C) 2002 David S. Miller <6>[ 6.218525] TCP: cubic registered <6>[ 6.223775] NET: Registered protocol family 10 <6>[ 6.232595] Mobile IPv6 <6>[ 6.234152] ip6_tables: (C) 2000-2006 Netfilter Core Team <6>[ 6.240073] IPv6 over IPv4 tunneling driver <6>[ 6.245322] NET: Registered protocol family 17 <6>[ 6.249320] Bluetooth: RFCOMM TTY layer initialized <6>[ 6.253715] Bluetooth: RFCOMM socket layer initialized <6>[ 6.258721] Bluetooth: RFCOMM ver 1.11 <6>[ 6.262505] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 <6>[ 6.267755] Bluetooth: BNEP filters: protocol <6>[ 6.272211] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 <5>[ 6.278559] Registering the dns_resolver key type <6>[ 6.284022] VFP support v0.3: implementor 51 architecture 64 part 6f variant 1 rev 0 <5>[ 6.290798] Registering SWP/SWPB emulation handler <6>[ 6.295589] clock_late_init: Removing enables held for handed-off clocks <7>[ 6.316343] vfp_pm_suspend: saving vfp state <6>[ 6.317198] MSM Watchdog Initialized <7>[ 6.333282] gpio_set_debounce: gpio-178 status -22 <3>[ 6.333312] gpio-keys gpio-keys: Unable to claim irq 658; error -16 <6>[ 6.333404] sps:BAM 0x28084000 enabled: ver:0x12, number of pipes:31 <6>[ 6.333404] sps:BAM 0x28084000 is registered. <4>[ 6.349122] gpio-keys: probe of gpio-keys failed with error -16 <6>[ 6.355348] rtc-pm8xxx rtc-pm8xxx: setting system clock to 1970-01-14 21:55:08 UTC (1202108) <6>[ 6.355348] tabla-slim tabla-slim: Platform data from board file <6>[ 6.356661] slimbus laddr:0x0, EAPC:0x1:0x60 <6>[ 6.356722] slimbus laddr:0x1, EAPC:0x0:0x50 <6>[ 6.356752] slimbus laddr:0x2, EAPC:0x5:0x50 <6>[ 6.356813] slimbus laddr:0x3, EAPC:0x1:0x50 <6>[ 6.356874] slimbus laddr:0x4, EAPC:0x0:0x60 <4>[ 6.392003] set_battery_data: invalid battid, palladium 1500 assumed batt_id 8123 <3>[ 6.399511] read_ocv_trim: program rev reg is 0x52 <3>[ 6.403418] read_ocv_trim: trim reg is 0x43 <3>[ 6.407569] read_ocv_trim: trim delta is 6 <3>[ 6.411689] pm8921_is_usb_chg_plugged_in: called before init <6>[ 6.418129] slimbus laddr:0x0, EAPC:0x1:0x60 <6>[ 6.421516] slimbus laddr:0x4, EAPC:0x0:0x60 <3>[ 6.421669] pm8921_is_usb_chg_plugged_in: called before init <3>[ 6.432839] pm8921_is_usb_chg_plugged_in: called before init <3>[ 6.437570] pm8921_is_batfet_closed: called before init <3>[ 6.472516] pm8921_is_usb_chg_plugged_in: called before init <6>[ 6.479566] pm8921_bms_probe: OK battery_capacity_at_boot=0 volt = 3175224 ocv = 3655713 <3>[ 6.488448] pm8921_is_usb_chg_plugged_in: called before init <3>[ 6.493209] pm8921_is_batfet_closed: called before init <3>[ 6.522569] pm8921_is_usb_chg_plugged_in: called before init <3>[ 6.529040] power_supply usb: driver failed to report `present' property: 4294967274 <3>[ 6.535876] power_supply usb: driver failed to report`present' property: 4294967274 <3>[ 6.543537] wcd9xxx_slim_probe: failed to get slimbus tabla-slim logical address: -6 <3>[ 6.543689] power_supply pm8921-dc: driver failed to report `present' property: 4294967274 <3>[ 6.543720] power_supply pm8921-dc: driver failed to report`present' property: 4294967274 <3>[ 6.551136] MSM_DCVS: msm_dcvs_register_core: msm_dcvs_register_core: scm power params failed ret = -22 <3>[ 6.551136] Unable to register core for 0 <4>[ 6.551167] msm_dcvs_gov: probe of msm_dcvs_gov failed with error -22 <6>[ 6.551472] ALSA device list:
shantanubhadoria commented 10 years ago

Hi Abhinav, Since you closed the issue, I hope you were able to solve your problem? I am afraid I haven't really used SYS6440 or android with this module for that matter before. Btw when I asked for logs, I meant install logs for this module not the Android log. Ideally if you have the right perl version, libi2c-dev and this module installed I don't think there should be any issues using this module. Cheers!

shantanubhadoria commented 10 years ago

If you still face issues update your Device::SMBus, this ticket should be in that module anyway, and I fixed it there