search

sharebrained / portapack-hackrf

Portability Add-On for the HackRF Software-Defined Radio.
GNU General Public License v2.0
992 stars 408 forks source link

Devices detected: 0 DFU, 0 HackRF #157

Open andytang123456789 opened 4 years ago

andytang123456789 commented 4 years ago

Devices detected: 0 DFU, 0 HackRF ERROR: HackRF not found. Please connect a HackRF One to your computer's USB port. If using a PortaPack, please put it in HackRF mode after connecting it. but i am sure i have connect the hackrf one and i can receive the radio through #SDR, but I cannot flash the firmware because the firmware cannot recognize hackrf one, even if I enter hackrf mode with portapack

Ghettopeter commented 4 years ago

I have the same problem. I also tried putting the HackRF device in DFU mode but that did not help at all. SDR# works fine using the same cable and the same USB port. I am using Windows10.

philsalesses commented 4 years ago

I am on Mac OSX 10.15.4 Catalina and have the same issue.

angelfr30 commented 4 years ago

Same problem with Windows 10.

saltchicken commented 4 years ago

I am having the same issue on Windows 10. I can use the HackRF in SDR# when the portapack is in HackRF mode, but I am unable to flash the device. Same issue even with DFU mode.

JCarter0525 commented 4 years ago

Has anyone found a resolution to this issue yet?

rgray107918 commented 3 years ago

Same issue here. I tried running as administrator, no dice. I even removed the portapack board, and tried entering DFU mode in the HackRF alone, and get same issue.

I did hold down the Reset + DFU button for closer to 15 seconds, and when running the DFU file, it gave me this:

Run HackRF firmware in RAM via LPC DFU

This is used to "unbrick" your HackRF, if you are no longer able to use HackRF tools to flash or operate your HackRF.

Connect your HackRF One to a USB port on your computer.

Hold down both the DFU and RESET buttons on the HackRF. Then release the RESET button (closest to the edge). Then release the DFU button.

Press any key to continue . . .

dfu-util 0.9

Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc. Copyright 2010-2016 Tormod Volden and Stefan Schmidt This program is Free Software and has ABSOLUTELY NO WARRANTY Please report bugs to http://sourceforge.net/p/dfu-util/tickets/

DFU suffix CRC does not match A valid DFU suffix will be required in a future dfu-util release!!! Opening DFU capable USB device... ID 1fc9:000c Run-time device DFU version 0100 Claiming USB DFU Interface... Setting Alternate Setting #0 ... Determining device status: state = dfuIDLE, status = 0 dfuIDLE, continuing DFU mode device DFU version 0100 Device returned transfer size 2048 Copying data from PC to DFU device Download [=========================] 100% 22056 bytes Download done. unable to read DFU status after completion can't detach Resetting USB to switch back to runtime mode

Press any key to continue . . .

My device also works fine in SDR#. Interestingly, it will not run on SDRAngel. However, I don't know if that is a device issue or an SDRAngel issue.

MichaelSMVogel commented 3 years ago

It's a driver issue - I resolved it by finding the hackrf device in the device manager and manually updating the driver. You can point it to the directory where you have the firmware downloaded. There is a driver folder. Windows tells you it already has the best driver but ignore that and choose from list - have disk - there are likely at least two versions in the list. It worked after I switched to the 2015 version.

JCarter0525 commented 3 years ago

I'll check it out and let you know. Thanks for letting me know the workaround! 

Sent from Yahoo Mail on Android

On Thu, Dec 3, 2020 at 9:32 AM, MichaelSMVogelnotifications@github.com wrote:

It's a driver issue - I resolved it by finding the hackrf device in the device manager and manually updating the driver. You can point it to the directory where you have the firmware downloaded. There is a driver folder. Windows tells you it already has the best driver but ignore that and choose from list - have disk - there are likely at least two versions in the list. It worked after I switched to the 2015 version.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.

JCarter0525 commented 3 years ago

I'm beginning to wonder if I have a defective device. I'm to the point that I'm willing to send it to someone who can complete this and pay them for their time...

MichaelSMVogel commented 3 years ago

Did you try the driver change? I have experienced this twice now on 3 computers. Windows found a newer driver and installed it on it's own and it works as far as the hackrf is concerned but the firmware utility can not see the hackrf.

RAMOhio commented 3 years ago

I solved the issue by removing the PortaPack from the HackRF, flashing the firmware with the PortaPack removed, and then once that completed everything was fine.

Additional notes:

Volleyoghurt commented 3 years ago

Devices detected: 0 DFU, 0 HackRF ERROR: HackRF not found. Please connect a HackRF One to your computer's USB port. If using a PortaPack, please put it in HackRF mode after connecting it. but i am sure i have connect the hackrf one and i can receive the radio through #SDR, but I cannot flash the firmware because the firmware cannot recognize hackrf one, even if I enter hackrf mode with portapack

this works for me: https://github.com/sharebrained/portapack-hackrf/wiki/Updating%20Firmware%20Windows

YourBrothe commented 2 years ago

Can't open device Bus 002 Device 004: ID 0a5c:5800: Entity not found
give me answer