Hardware Reference - Githubissues

sharkduino / Arduino_Animal_Tag

The main code that runs on the Sharkduinos

0 stars 0 forks source link

Hardware Reference #32

Open TheBen27 opened 7 years ago

TheBen27 commented 7 years ago

This has been superseded by the following document

The below information should not be used, it only exists for historical reference.

For convenience's sake, here's a list of the hardware on each Arduino tag.

Arduino 1.0

MMA8452Q Accelerometer
L3GD20H Gyroscope
DS3234 RTC
DS3234 RTC interrupt connected to pin 2
TMP102 Temperature Sensor
MS5803 Temp/Pressure Sensor
Push-Push microSD slot

Arduino 2.0

MMA8452Q Accelerometer
MMA8452Q INT1 pin wired to Arduino pin 3
FXAS21002 Gyroscope
DS1339B RTC
DS1339B RTC interrupt connected to pin 2
External MS5803 Temp/Pressure Sensor
Push-pull microSD slot

Arduino 2.1

New accelerometer: MMA8451Q
MMA8451Q INT1 pin wired to Arduino pin 3

Arduino 2.2

FXAS21002 INT2 pin wired to Arduino pin 2~~

WLaney commented 7 years ago

I have updated the above comment with the following minor correction: The uSD slot on the V1.0 technical name is Push-Push