Closed GoogleCodeExporter closed 9 years ago
There is a problem with the design of your architecture. Lets assume that the
input circuit is just inpad --> flip-flop --> outpad. Your architecture, as
specified, cannot implement this circuit because the flip-flops in your
architecture cannot be reached without first going through a gate. To fix this
problem, you can do one of two things:
1. Add a bypass mux so that the flip-flip can be reached without going through
your cone.
or
2. If your HL cone has the ability to implement an interconnect wire, then you
must explicitly state that by creating a mode of operation that implements just
a wire.
Original comment by JasonKai...@gmail.com
on 3 Jul 2014 at 4:35
You are right.
I added a bypass mux and now it works.
I truly appreciate your help in resolving the problem.
Original comment by 7thi...@gmail.com
on 3 Jul 2014 at 5:46
Original comment by JasonKai...@gmail.com
on 3 Jul 2014 at 5:50
Original issue reported on code.google.com by
7thi...@gmail.com
on 3 Jul 2014 at 10:28Attachments: