Connection Problem with Cloud Connect

northpower25 commented 2 years ago

With the ha version core-2022.6.4 it is not possible to connect via the Cloud connection

Error Message in the ha integration menu:

„ERROR

This integration does not support UI configuration. If you followed this link from the Home Assistant website, make sure you're running the latest version of Home Assistant.“

jellyman1978 commented 2 years ago

same issue

zeppmg commented 2 years ago

Still the same with version 2022.6.5.

jaxter0ne commented 2 years ago

Same issue for me too

snigehere commented 2 years ago

I have the same issue .... I first installed dyson local and that worked but I could not figure out the answers to the questions - On wifi method I have no idea what the ssid was ... the linked document that where the idea came from said that the ssid / wifi password were only on the older devices. On the manual method I know the serial but have no idea what the Credential was.

I then read I could install dyson cloud to do the config but when I installed that I got the error mentioned above. I went back to local to try and add the integration and got the same error there where it had previously popped the method prompt. I guess the cloud install brought something down that screwed up local. I removed both and reinstalled local and was back to getting the method prompt but still have no idea what the answers to the questions are .... ho hum

I saw in the readme so step that involved running a python script to get the answers but, although I managed to install python on my PC, running the suggested script is beyond my skill without more detailed guidance. Looks like I need to go to python school.

gmcaesar commented 2 years ago

there is an open ticket for this on the cloud integration, but I have seen no movement or communication from developers, Is anyone here working on this?

shenxn / ha-dyson

Connection Problem with Cloud Connect #140