Update on Shinken Migration to Python 3: Any News?

[garadar]

Dear @naparuba, @geektophe, and @shinken-solutions,

I am an HPC system engineer and have been using Shinken since my beginning in this vast IT world.

I used to work on RHEL/CentOS7, but ongoing administration/maintenance is pushing us to migrate to newer architectures, EL8/9, which complicates the deployment of Shinken with Python 2.

Currently, we are using a Docker container, but it has its limitations.

Do you have any updates on the migration to Python 3?

Thank you for your work and this solution !

PS: (I doubt you are not already aware, but...) The Python tool https://docs.python.org/3/library/2to3.html may be an interesting tool for automating the translation to Python 3.

PS2: If you need help maybe some tasks can be delegate to the community and pull requested. Let us know !

[getienne53]

hi

I think the project is actually stop or dead :-(

I installed version 3 of Shinken in a debian 11 VM with the following procedure:

apt-get install python3-pip python-six python3-bottle python3-cherrypy3 adduser shinken su - shinken git clone https://github.com/shinken-solutions/shinken.git

cd /home/shinken/shinken python3 setup.py install python3 setup.py post_install --install-conf --install-default --install-init

for i in arbiter poller reactionner scheduler broker receiver; do systemctl enable shinken-$i.service; done

/usr/local/bin/shinken-arbiter -v -c /etc/shinken/shinken.cfg //to control good installation

The 6 shinken services are started !

Well, but the following "shinken" script which apparently allows you to add modules (like webui2) does not seem to have been completely ported to Python3. -->/usr/local/lib/python3.9/dist-packages/Shinken-3.0.0rc1-py3.9.egg/EGG-INFO/scripts/shinken

In particular, there are several errors in the ConfigParser commands, and the CONFIG dictionary.

best regards

[garadar]

Hi @getienne53

It was I did, I installed shinken on VM rocky 8 separate of other soft to avoid incompatibility python issue. All with pip is working but you have to set alternative python to python 2.

[getienne53]

Thanks for your reply @garadar :-)

I tried with update-alternatives --config python :

Selection Path Priority Status

• 0 /usr/bin/python3.9 2 auto mode 1 /usr/bin/python2.7 1 manual mode 2 /usr/bin/python3.9 2 manual mode

Selection 0, 1 or 2 give the same error -->

File "/usr/local/lib/python3.9/dist-packages/Shinken-3.0.0rc1-py3.9.egg/EGG-INFO/scripts/shinken", line 428, in main cfg = ConfigParser.ConfigParser() NameError: name 'ConfigParser' is not defined

"ConfigParser" is a python2 command. The shebang of shinken script is python2 --> #!/usr/bin/env python

So, i don't understand why that dont work, with python 2.7.18

If i modify the shebang with #!/usr/bin/env python3, i have the same error with python3

that's life :-(

[garadar]

Weird indeed. I a migrating my vm I will give my prodecure once completed.

But I used pip to install it and I had to reinstall my-curl in a specific and old version and recompile another package with specific option.... Well I need to document clearly.

I also contact the customer service of shinken Enterprise to know if this solution is compatible with latest OS.

Are you on rocky 8 too?

[Guillaume001]

Hi,

I converted all the files via 2to3 and corrected the problems when running cli shinken. Module installation seems to be working fine.

https://github.com/Guillaume001/shinken/tree/python3

On Debian 12 and Python 3.11.2.

I've got all the deamons running and they seem to be taking their configuration.

I'm trying to port mod-livestatus and mod-logstore-sqlite to connect a thruk but there are still quite a few problems.

[garadar]

Interesting, I am using this both mod, what kind of issue do you have ?

[getienne53]

hello

I took the shinken script writed in python3 from Guillaume001's repository. (thanks to him)

Now "sudo shinken --init" works :-)

I tried to install the webui or webui2 modules and I got the following error:

sudo shinken install webui2 Traceback (most recent call last): File "/usr/local/bin/shinken", line 4, in import('pkg_resources').run_script('Shinken==3.0.0rc1', 'shinken') File "/usr/lib/python3/dist-packages/pkg_resources/init.py", line 651, in run_script self.require(requires)[0].run_script(script_name, ns) File "/usr/lib/python3/dist-packages/pkg_resources/init.py", line 1448, in run_script exec(code, namespace, namespace) File "/usr/local/lib/python3.9/dist-packages/Shinken-3.0.0rc1-py3.9.egg/EGG-INFO/scripts/shinken", line 546, in main() File "/usr/local/lib/python3.9/dist-packages/Shinken-3.0.0rc1-py3.9.egg/EGG-INFO/scripts/shinken", line 456, in main CLI = CLICommander(CONFIG, cfg, opts) File "/usr/local/lib/python3.9/dist-packages/Shinken-3.0.0rc1-py3.9.egg/EGG-INFO/scripts/shinken", line 154, in init self.load_cli_mods(opts) File "/usr/local/lib/python3.9/dist-packages/Shinken-3.0.0rc1-py3.9.egg/EGG-INFO/scripts/shinken", line 186, in load_cli_mods spec.loader.exec_module(m) File "", line 790, in exec_module File "", line 228, in _call_with_frames_removed File "/var/lib/shinken/cli/shinkenio/cli.py", line 35, in from StringIO import StringIO ModuleNotFoundError: No module named 'StringIO'

By replacing "from StringIO import StringIO" with "from io import StringIO" in /var/lib/shinken/cli/shinkenio/cli.py, we move forward but we still get the error:

shinken@ct-shinken:~/shinken$ sudo shinken install webui2 Grabbing : webui2 TypeError: string argument expected, got 'bytes' [1708442557] ERROR: [Shinken] There was a critical error : (23, 'Failure writing output to destination')

Same error with "webui" module.

Any idea ?

[garadar]

Hi @getienne53 On my side I use Trhuk for the webGUI, and it's working really fine. Thruk is not dead:

https://github.com/sni/Thruk

[Guillaume001]

hi @getienne53

Actualy, i install module livestatus and logstore-sqlite via the following commands : git clone https://github.com/shinken-monitoring/mod-livestatus.git git clone https://github.com/shinken-monitoring/mod-logstore-sqlite.git shinken install --local mod-livestatus/ shinken install --local mod-logstore-sqlite/

Some parts may be missing for downloading modules..

[Guillaume001]

hi @garadar

I currently have the following errors :

broker logs

[1708385159] INFO: [broker-master] We received modules [<module type=livestatus name=livestatus />, <module type=logstore_sqlite name=logstore-sqlite />] 
[1708385160] WARNING: [broker-master] Cannot import livestatus : __bases__ assignment: 'LifoQueue' deallocator differs from 'object'
[1708385160] WARNING: [broker-master] Cannot import livestatus.livestatus.module : __bases__ assignment: 'LifoQueue' deallocator differs from 'object'
[1708385160] WARNING: [broker-master] Cannot import logstore-sqlite.logstore-sqlite.module : 'NoneType' object has no attribute 'LiveStatusStack'
[1708385160] WARNING: [broker-master] Cannot import livestatus : __bases__ assignment: 'LifoQueue' deallocator differs from 'object'
[1708385160] WARNING: [broker-master] Cannot import livestatus.livestatus.module : __bases__ assignment: 'LifoQueue' deallocator differs from 'object'
[1708385160] WARNING: [broker-master] The module type livestatus for livestatus was not found in modules!
[1708385160] WARNING: [broker-master] The module type logstore-sqlite for logstore-sqlite was not found in modules!
[1708385160] INFO: [broker-master] I correctly loaded the modules: []

scheduler logs

[1708455999] WARNING: [Shinken] 1 checks never came back for the satellite 'poller-master'. I reenable them for polling

during starting up reactionner and poller daemon :

I STOP THE http_daemon <shinken.http_daemon.HTTPDaemon object at 0x7f5d9408b5d0>
I STOP THE http_daemon <shinken.http_daemon.HTTPDaemon object at 0x7f5d9408b5d0>
I STOP THE http_daemon <shinken.http_daemon.HTTPDaemon object at 0x7f5d9408b5d0>
I STOP THE http_daemon <shinken.http_daemon.HTTPDaemon object at 0x7f5d9408b5d0>

[garadar]

Hi @Guillaume001 @getienne53

It's been a while, but I'm back with some exciting news, I hope. I've managed to make Shinken work without any code changes on Rocky 8.

Here's the procedure I posted: https://github.com/shinken-solutions/shinken/issues/2033.

Additionally, I've created a SaltStack (similar to Puppet or Ansible) Shinken installation for automatic deployment.

So far, I haven't encountered any conflicts or errors. :)

Let me know how it's work for you !