search

shuirna / electricsleep

Automatically exported from code.google.com/p/electricsleep
0 stars 0 forks source link

calibration issue #16

Closed GoogleCodeExporter closed 8 years ago

GoogleCodeExporter commented 8 years ago 
What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?

What version of the product are you using? On what operating system?

Please provide any additional information below.

Original issue reported on code.google.com by pegbat...@gmail.com on 13 Nov 2010 at 1:37

GoogleCodeExporter commented 8 years ago 
(My droid issued  this before I could type anything)
The calibration issue:  With the cal level set at 0.17 The graph shows activity 
all night - about 1/4 to 1/3 of the graph is green across the bottom for most 
of the night... Never goes to zero,  however it didn't alarm before the alarm 
time.  There were spikes during the night when l got up, and when I picked up 
the phone.  
When I set the calibration higher, it is harder to make the alarm trigger.  
Lower and the graph is all green.
I didn't leave it on the recalibrate setting a it chose 2.0 and I had to shake 
the phone to make it trigger.

The previous release the graphs looked reasonable, no movement, no green.

It seems a lot harder to make the alarm trigger.  I tried down to

Original comment by pegbat...@gmail.com on 13 Nov 2010 at 1:52

GoogleCodeExporter commented 8 years ago 
(dratted droid)
I tried setting the cal level down to 0.02 .. The alarm would trigger more 
satisfactorily, but the graph was almost all green.

Original comment by pegbat...@gmail.com on 13 Nov 2010 at 1:56

GoogleCodeExporter commented 8 years ago 
beta 0.3.0  android 2.2 on droid x

Original comment by pegbat...@gmail.com on 13 Nov 2010 at 1:57

GoogleCodeExporter commented 8 years ago 
The activity covering anywhere from 0 to 1/2 of the graph while you're in deep 
sleep is something that I would consider normal with the newer version. 
However, it should still trigger when you move (aka the graph should spike to 
the very top when you move.) Remember that the pre-alarm is not guaranteed to 
trigger.. I'm having a lot of trouble finding a method that is accurate and 
works on all these different devices.

Original comment by jondwil...@gmail.com on 13 Nov 2010 at 6:10

GoogleCodeExporter commented 8 years ago

Original comment by jondwil...@gmail.com on 15 Nov 2010 at 2:06

GoogleCodeExporter commented 8 years ago 
11-15  v0.3.1
Alarm set for 6:35, sensitivity manually set to 0.17.
Graph shows reasonable activity during the night, large spike at beginning, 
spike in the middle of the night, about 10%-15% most of the rest of the time.
Woke up at 6:17.  Turned over-small spike.  Turned again, no alarm, not much 
spike.
Changed sensitivity to 0.06: No big spike or alarm to movement.  Picked up 
phone:  big spike, no alarm.  Alarm went off at 6:35.
Did not re-cal after download of latest version.  Will try that tonight

Original comment by pegbat...@gmail.com on 15 Nov 2010 at 11:50

GoogleCodeExporter commented 8 years ago

Original comment by jondwil...@gmail.com on 16 Dec 2010 at 2:51