Calibration for drop and light sleep disabled

shuirna / electricsleep

Automatically exported from code.google.com/p/electricsleep

0 stars 0 forks source link

Calibration for drop and light sleep disabled #5

Closed GoogleCodeExporter closed 8 years ago

GoogleCodeExporter commented 8 years ago

What steps will reproduce the problem?
1. Go to settings
2. Look under calibration
3.

What is the expected output? What do you see instead?
Expect to be able to select either deep or light sleep.  Both selections are 
dim and inaccessible

What version of the product are you using? On what operating system?

Couldn't find version number..beta.  Android 2.2 on motorola droid x.
Please provide any additional information below.

First used automatic calibration (it set itself to 0.0 and 7.5.  After sleeping 
all night I woke on my own 10 minutes b4 alarm was set to go off. I, moved to 
see if the alarm would go off.. No.  then picked up and shook the clock...Did 
not go off.  Re-calibrated (0.0 and 0.01)  alarm went off at the slightest 
movement.  Need to be able to find the happy medium.

Original issue reported on code.google.com by pegbat...@gmail.com on 1 Nov 2010 at 10:52

GoogleCodeExporter commented 8 years ago

7.5 is really, really high. This makes me feel like there's something else 
going on with the calibration. Also, 0.01 is really low. Can you provide any 
more detail about what you did when calibrating? Where did you place your 
phone, how much did you move, etc.?

The sliders will be re-enabled in a future release.

Original comment by jondwil...@gmail.com on 1 Nov 2010 at 3:16

Changed state: Started

GoogleCodeExporter commented 8 years ago

My phone was placed in the desktop docking station, sitting on my bed about 10 
- 14 inches from my right shoulder.  Perhaps being in the docking station with 
the phone at about an 80 degree angle affects the equations you may be using?
One of the other smart alarm applications (not Kosenkov's -  Smart Alarm Lite) 
has a calibration process where you could see the effects of different 
movements, and then adjust with the slider the sensitivity.

I tried to simulate movement of turning from my side to my back, both times.  
One time I did get the level to go from 0.01 to 0.03.

I'll be happy to keep on beta testing - I'm glad you took this challenge on!
Thanks

Original comment by pegbat...@gmail.com on 1 Nov 2010 at 3:59

GoogleCodeExporter commented 8 years ago

Placed the phone flat on the bed last night, and it calibrated to 0.45 - and 
seemed to be making a reasonable graph.  

but then -- the unstoppable alarm (see issue 6)

thanks
Peggy

Original comment by pegbat...@gmail.com on 2 Nov 2010 at 6:15

GoogleCodeExporter commented 8 years ago

FYI - calibrated to .41 last night.  Phone didn't go off when I did a major 
body shift within the correct time frame.  Thumped the bed right next to the 
phone to make it go off - made a reasonable graph (small blips - larger blips), 
but don't know the scale or see a threshold line.

Will try to make the cal go to .2 or thereabouts tonight - does that seem 
reasonable?

Original comment by pegbat...@gmail.com on 3 Nov 2010 at 4:14

GoogleCodeExporter commented 8 years ago

I'm changing the way ElectricSleep monitors movement... it really should fix 
these problems you're experiencing this time.

Original comment by jondwil...@gmail.com on 4 Nov 2010 at 11:44

GoogleCodeExporter commented 8 years ago

Looking forward to the next release.
Thanks!

Original comment by pegbat...@gmail.com on 5 Nov 2010 at 3:56

GoogleCodeExporter commented 8 years ago

Original comment by jondwil...@gmail.com on 15 Nov 2010 at 2:12

Changed state: Fixed