Whenever the radio is restarted, it turns on the lights to a specific value even if there was no command sent.

Describe the bug

Whenever the radio is restarted, for example after a complet reset or chaning radio values, the lights either turn on (if they were off) or change their brightness to a specific value (if they were on and at a different brightness level than the one the radio sends)

Steps to reproduce

Just restarting the device should do this.

Expected behavior

Restarting the device or chaning radio values like the send channel or listen channel should not send any command at all.

Setup information

Firmware version

1.11.2 (nodemcuv2)

Output of http://milight-hub.local/about

{"firmware":"milight-hub","version":"1.11.2","ip_address":"192.168.1.27","reset_reason":"Software/System restart","variant":"nodemcuv2","free_heap":18120,"arduino_version":"3.1.2","free_stack":1600,"flash_used":16315,"flash_total":957314,"flash_pct_free":98,"queue_stats":{"length":0,"dropped_packets":0}}

Output of http://milight-hub.local/settings

{"admin_username":"","admin_password":"","ce_pin":4,"csn_pin":15,"reset_pin":0,"led_pin":-2,"radio_interface_type":"nRF24","packet_repeats":50,"http_repeat_factor":1,"auto_restart_period":0,"mqtt_server":"192.168.1.42:1883","mqtt_username":"","":"","mqtt_topic_pattern":"milight/commands/:device_id/:device_type/:group_id","mqtt_update_topic_pattern":"milight/updates/:device_id/:device_type/:group_id","mqtt_state_topic_pattern":"milight/states/:device_id/:device_type/:group_id","mqtt_client_status_topic":"milight/client_status","simple_mqtt_client_status":true,"discovery_port":48899,"listen_repeats":3,"state_flush_interval":10000,"mqtt_state_rate_limit":500,"mqtt_debounce_delay":500,"mqtt_retain":true,"packet_repeat_throttle_sensitivity":0,"packet_repeat_throttle_threshold":200,"packet_repeat_minimum":3,"enable_automatic_mode_switching":false,"led_mode_wifi_config":"Fast toggle","led_mode_wifi_failed":"Slow blip","led_mode_operating":"On","led_mode_packet":"Flicker","led_mode_packet_count":3,"hostname":"milight-hub","rf24_power_level":"MAX","rf24_listen_channel":"LOW","wifi_static_ip":"","wifi_static_ip_gateway":"","wifi_static_ip_netmask":"","packet_repeats_per_loop":10,"home_assistant_discovery_prefix":"homeassistant","wifi_mode":"g","default_transition_period":500,"rf24_channels":["HIGH"],"device_ids":[51622],"gateway_configs":[],"group_state_fields":["state","brightness","mode"]}

sidoh / esp8266_milight_hub