siduck
commented
3 years ago the chars seem to be randomly spaced
Use a nerdfont , I think it's already specified in the readme.
Closed makerio90 closed 3 years ago
siduck
commented
3 years ago the chars seem to be randomly spaced
Use a nerdfont , I think it's already specified in the readme.
makerio90
commented
3 years ago i changed the and its still doing it. look at the image, you can see now some chars overlap and some don't
siduck
commented
3 years ago i changed the and its still doing it. look at the image, you can see now some chars overlap and some don't
which font tho? you need to change it in xresources file and then run xrdb merge xresources to reload the change.
makerio90
commented
3 years ago i used both default and Ubuntu. also i edited the config.h file
siduck
commented
3 years ago i used both default and Ubuntu. also i edited the config.h file
maybe you're writing the font name incorrect and also after making cahnges to config.h you need to recompile st by sudo make install , install Jetbrainsmono Nerd Font and test the default config.
makerio90
commented
3 years ago here is a better picture of the issue
the exact commant was
[14:10:26] makerio@makerio:~$ mmmmmmmmamamamammammnamnamnnote the overlaping chars
siduck
commented
3 years ago this ofc looks like a font problem , install the default font used and use default config to test the font.
ashincoder
commented
3 years ago @makerio90 the font in the config.def.h is specified to use JetBrainsMono Nerd Font. If you don't use this font it will appear weirdly otherwise go to config.def.h and change the font to your liking.
makerio90
commented
3 years ago i've switched to a different terminal emulator, but i have that font installed
siduck
commented
3 years ago i've switched to a different terminal emulator, but i have that font installed
I dont think so , also when you do xrdb merge xresources , you need to open a new st window to reload the changes
makerio90
commented
3 years ago i've switched to a different terminal emulator, but i have that font installed
I dont think so , also when you do xrdb merge xresources , you need to open a new st window to reload the changes
i did that
siduck
commented
3 years ago i've switched to a different terminal emulator, but i have that font installed
I dont think so , also when you do xrdb merge xresources , you need to open a new st window to reload the changes
i did that
Show me your configs
makerio90
commented
3 years ago /* See LICENSE file for copyright and license details. */
/*
* appearance
*
* font: see http://freedesktop.org/software/fontconfig/fontconfig-user.html
*/
static char *font = "JetBrainsMono Nerd Font :pixelsize=15:antialias=true:autohint=true";
static char *font2[] = { "JetBrainsMono Nerd Font :pixelsize=15:antialias=true:autohint=true" };
static int borderpx = 0;
/*
* What program is execed by st depends of these precedence rules:
* 1: program passed with -e
* 2: utmp option
* 3: SHELL environment variable
* 4: value of shell in /etc/passwd
* 5: value of shell in config.h
*/
static char *shell = "/bin/sh";
char *utmp = NULL;
char *stty_args = "stty raw pass8 nl -echo -iexten -cstopb 38400";
/* identification sequence returned in DA and DECID */
char *vtiden = "\033[?6c";
/* Kerning / character bounding-box multipliers */
static float cwscale = 1.0;
static float chscale = 1.0;
/*
* word delimiter string
*
* More advanced example: L" `'\"()[]{}"
*/
wchar_t *worddelimiters = L" ";
/* selection timeouts (in milliseconds) */
static unsigned int doubleclicktimeout = 300;
static unsigned int tripleclicktimeout = 600;
/* alt screens */
int allowaltscreen = 1;
/*
* draw latency range in ms - from new content/keypress/etc until drawing.
* within this range, st draws when content stops arriving (idle). mostly it's
* near minlatency, but it waits longer for slow updates to avoid partial draw.
* low minlatency will tear/flicker more, as it can "detect" idle too early.
*/
static double minlatency = 8;
static double maxlatency = 33;
/*
* Synchronized-Update timeout in ms
* https://gitlab.com/gnachman/iterm2/-/wikis/synchronized-updates-spec
*/
static uint su_timeout = 200;
/*
* blinking timeout (set to 0 to disable blinking) for the terminal blinking
* attribute.
*/
static unsigned int blinktimeout = 800;
/*
* interval (in milliseconds) between each successive call to ximspot. This
* improves terminal performance while not reducing functionality to those
* whom need XIM support.
*/
int ximspot_update_interval = 1000;
/*
* thickness of underline and bar cursors
*/
static unsigned int cursorthickness = 2;
/*
* 1: render most of the lines/blocks characters without using the font for
* perfect alignment between cells (U2500 - U259F except dashes/diagonals).
* Bold affects lines thickness if boxdraw_bold is not 0. Italic is ignored.
* 0: disable (render all U25XX glyphs normally from the font).
*/
const int boxdraw = 1;
const int boxdraw_bold = 1;
/* braille (U28XX): 1: render as adjacent "pixels", 0: use font */
const int boxdraw_braille = 1;
/*
* bell volume. It must be a value between -100 and 100. Use 0 for disabling
* it
*/
static int bellvolume = 0;
/* default TERM value */
char *termname = "st-256color";
/*
* spaces per tab
*
* When you are changing this value, don't forget to adapt the »it« value in
* the st.info and appropriately install the st.info in the environment where
* you use this st version.
*
* it#$tabspaces,
*
* Secondly make sure your kernel is not expanding tabs. When running `stty
* -a` »tab0« should appear. You can tell the terminal to not expand tabs by
* running following command:
*
* stty tabs
*/
unsigned int tabspaces = 8;
/* bg opacity */
float alpha = 1.0;
/* Terminal colors (16 first used in escape sequence) */
static const char *colorname[] = {
"#282828", /* hard contrast: #1d2021 / soft contrast: #32302f */
"#cc241d",
"#98971a",
"#d79921",
"#458588",
"#b16286",
"#689d6a",
"#a89984",
"#928374",
"#fb4934",
"#b8bb26",
"#fabd2f",
"#83a598",
"#d3869b",
"#8ec07c",
"#ebdbb2",
[255] = 0,
/* more colors can be added after 255 to use with DefaultXX */
"#add8e6", /* 256 -> cursor */
"#555555", /* 257 -> rev cursor*/
"#282828", /* 258 -> bg */
"#ffffff", /* 259 -> fg */
};
/*
* Default colors (colorname index)
* foreground, background, cursor, reverse cursor
*/
unsigned int defaultfg = 259;
unsigned int defaultbg = 258;
unsigned int defaultcs = 256;
unsigned int defaultrcs = 257;
/*
* Default shape of cursor
* 2: Block ("█")
* 4: Underline ("_")
* 6: Bar ("|")
* 7: Snowman ("☃")
*/
static unsigned int cursorshape = 6;
/*
* Default columns and rows numbers
*/
static unsigned int cols = 80;
static unsigned int rows = 24;
/*
* Default colour and shape of the mouse cursor
*/
static unsigned int mouseshape = XC_xterm;
static unsigned int mousefg = 7;
static unsigned int mousebg = 0;
/*
* Color used to display font attributes when fontconfig selected a font which
* doesn't match the ones requested.
*/
static unsigned int defaultattr = 11;
/*
* Xresources preferences to load at startup
*/
ResourcePref resources[] = {
{ "font", STRING, &font },
{ "fontalt0", STRING, &font2[0] },
{ "color0", STRING, &colorname[0] },
{ "color1", STRING, &colorname[1] },
{ "color2", STRING, &colorname[2] },
{ "color3", STRING, &colorname[3] },
{ "color4", STRING, &colorname[4] },
{ "color5", STRING, &colorname[5] },
{ "color6", STRING, &colorname[6] },
{ "color7", STRING, &colorname[7] },
{ "color8", STRING, &colorname[8] },
{ "color9", STRING, &colorname[9] },
{ "color10", STRING, &colorname[10] },
{ "color11", STRING, &colorname[11] },
{ "color12", STRING, &colorname[12] },
{ "color13", STRING, &colorname[13] },
{ "color14", STRING, &colorname[14] },
{ "color15", STRING, &colorname[15] },
{ "background", STRING, &colorname[258] },
{ "foreground", STRING, &colorname[259] },
{ "cursorColor", STRING, &colorname[256] },
{ "termname", STRING, &termname },
{ "shell", STRING, &shell },
{ "blinktimeout", INTEGER, &blinktimeout },
{ "bellvolume", INTEGER, &bellvolume },
{ "tabspaces", INTEGER, &tabspaces },
{ "borderpx", INTEGER, &borderpx },
{ "cwscale", FLOAT, &cwscale },
{ "chscale", FLOAT, &chscale },
{ "alpha", FLOAT, &alpha },
{ "ximspot_update_interval", INTEGER, &ximspot_update_interval },
};
/*
* Internal mouse shortcuts.
* Beware that overloading Button1 will disable the selection.
*/
const unsigned int mousescrollincrement = 3;
static MouseShortcut mshortcuts[] = {
/* button mask string */
{ Button4, XK_NO_MOD, "\031" },
{ Button5, XK_NO_MOD, "\005" },
};
/* Internal keyboard shortcuts. */
#define MODKEY Mod1Mask
#define TERMMOD (Mod4Mask|ShiftMask)
MouseKey mkeys[] = {
/* button mask function argument */
{ Button4, XK_NO_MOD, kscrollup, {.i = mousescrollincrement} },
{ Button5, XK_NO_MOD, kscrolldown, {.i = mousescrollincrement} },
{ Button4, Mod4Mask, zoom, {.f = +1} },
{ Button5, Mod4Mask, zoom, {.f = -1} },
};
static char *openurlcmd[] = { "/bin/sh", "-c", "st-urlhandler", "externalpipe", NULL };
static char *copyurlcmd[] = { "/bin/sh", "-c",
"tmp=$(sed 's/.*│//g' | tr -d '\n' | grep -aEo '(((http|https|gopher|gemini|ftp|ftps|git)://|www\\.)[a-zA-Z0-9.]*[:]?[a-zA-Z0-9./@$&%?$#=_-~]*)|((magnet:\\?xt=urn:btih:)[a-zA-Z0-9]*)' | uniq | sed 's/^www./http:\\/\\/www\\./g' ); IFS=; [ ! -z $tmp ] && echo $tmp | dmenu -i -p 'Copy which url?' -l 10 | tr -d '\n' | xclip -selection clipboard",
"externalpipe", NULL };
static char *copyoutput[] = { "/bin/sh", "-c", "st-copyout", "externalpipe", NULL };
static Shortcut shortcuts[] = {
/* mask keysym function argument */
{ XK_ANY_MOD, XK_Break, sendbreak, {.i = 0} },
{ ControlMask, XK_Print, toggleprinter, {.i = 0} },
{ ShiftMask, XK_Print, printscreen, {.i = 0} },
{ XK_ANY_MOD, XK_Print, printsel, {.i = 0} },
{ MODKEY, XK_comma, zoom, {.f = +1} },
{ MODKEY, XK_period, zoom, {.f = -1} },
{ MODKEY, XK_g, zoomreset, {.f = 0} },
{ ControlMask | ShiftMask, XK_C, clipcopy, {.i = 0} },
{ ShiftMask, XK_Insert, clippaste, {.i = 0} },
{ ControlMask | ShiftMask, XK_V, clippaste, {.i = 0} },
{ XK_ANY_MOD, Button2, selpaste, {.i = 0} },
{ MODKEY, XK_Num_Lock, numlock, {.i = 0} },
{ MODKEY, XK_Control_L, iso14755, {.i = 0} },
{ ShiftMask, XK_Page_Up, kscrollup, {.i = -1} },
{ ShiftMask, XK_Page_Down, kscrolldown, {.i = -1} },
{ MODKEY, XK_Page_Up, kscrollup, {.i = -1} },
{ MODKEY, XK_Page_Down, kscrolldown, {.i = -1} },
{ MODKEY, XK_k, kscrollup, {.i = 1} },
{ MODKEY, XK_j, kscrolldown, {.i = 1} },
{ MODKEY, XK_Up, kscrollup, {.i = 1} },
{ MODKEY, XK_Down, kscrolldown, {.i = 1} },
{ MODKEY, XK_u, kscrollup, {.i = -1} },
{ MODKEY, XK_d, kscrolldown, {.i = -1} },
{ MODKEY, XK_s, changealpha, {.f = -0.05} },
{ MODKEY, XK_a, changealpha, {.f = +0.05} },
{ MODKEY, XK_m, changealpha, {.f = +2.00} },
{ TERMMOD, XK_Up, zoom, {.f = +1} },
{ TERMMOD, XK_Down, zoom, {.f = -1} },
{ TERMMOD, XK_K, zoom, {.f = +1} },
{ TERMMOD, XK_J, zoom, {.f = -1} },
{ TERMMOD, XK_U, zoom, {.f = +2} },
{ TERMMOD, XK_D, zoom, {.f = -2} },
{ MODKEY, XK_l, externalpipe, {.v = openurlcmd } },
{ MODKEY, XK_y, externalpipe, {.v = copyurlcmd } },
{ MODKEY, XK_o, externalpipe, {.v = copyoutput } },
{ TERMMOD, XK_Return, newterm, {.i = 0} },
};
/*
* Special keys (change & recompile st.info accordingly)
*
* Mask value:
* * Use XK_ANY_MOD to match the key no matter modifiers state
* * Use XK_NO_MOD to match the key alone (no modifiers)
* appkey value:
* * 0: no value
* * > 0: keypad application mode enabled
* * = 2: term.numlock = 1
* * < 0: keypad application mode disabled
* appcursor value:
* * 0: no value
* * > 0: cursor application mode enabled
* * < 0: cursor application mode disabled
* crlf value
* * 0: no value
* * > 0: crlf mode is enabled
* * < 0: crlf mode is disabled
*
* Be careful with the order of the definitions because st searches in
* this table sequentially, so any XK_ANY_MOD must be in the last
* position for a key.
*/
/*
* If you want keys other than the X11 function keys (0xFD00 - 0xFFFF)
* to be mapped below, add them to this array.
*/
static KeySym mappedkeys[] = { -1 };
/*
* State bits to ignore when matching key or button events. By default,
* numlock (Mod2Mask) and keyboard layout (XK_SWITCH_MOD) are ignored.
*/
static uint ignoremod = Mod2Mask|XK_SWITCH_MOD;
/*
* Override mouse-select while mask is active (when MODE_MOUSE is set).
* Note that if you want to use ShiftMask with selmasks, set this to an other
* modifier, set to 0 to not use it.
*/
static uint forceselmod = ShiftMask;
/*
* This is the huge key array which defines all compatibility to the Linux
* world. Please decide about changes wisely.
*/
static Key key[] = {
/* keysym mask string appkey appcursor */
{ XK_KP_Home, ShiftMask, "\033[2J", 0, -1},
{ XK_KP_Home, ShiftMask, "\033[1;2H", 0, +1},
{ XK_KP_Home, XK_ANY_MOD, "\033[H", 0, -1},
{ XK_KP_Home, XK_ANY_MOD, "\033[1~", 0, +1},
{ XK_KP_Up, XK_ANY_MOD, "\033Ox", +1, 0},
{ XK_KP_Up, XK_ANY_MOD, "\033[A", 0, -1},
{ XK_KP_Up, XK_ANY_MOD, "\033OA", 0, +1},
{ XK_KP_Down, XK_ANY_MOD, "\033Or", +1, 0},
{ XK_KP_Down, XK_ANY_MOD, "\033[B", 0, -1},
{ XK_KP_Down, XK_ANY_MOD, "\033OB", 0, +1},
{ XK_KP_Left, XK_ANY_MOD, "\033Ot", +1, 0},
{ XK_KP_Left, XK_ANY_MOD, "\033[D", 0, -1},
{ XK_KP_Left, XK_ANY_MOD, "\033OD", 0, +1},
{ XK_KP_Right, XK_ANY_MOD, "\033Ov", +1, 0},
{ XK_KP_Right, XK_ANY_MOD, "\033[C", 0, -1},
{ XK_KP_Right, XK_ANY_MOD, "\033OC", 0, +1},
{ XK_KP_Prior, ShiftMask, "\033[5;2~", 0, 0},
{ XK_KP_Prior, XK_ANY_MOD, "\033[5~", 0, 0},
{ XK_KP_Begin, XK_ANY_MOD, "\033[E", 0, 0},
{ XK_KP_End, ControlMask, "\033[J", -1, 0},
{ XK_KP_End, ControlMask, "\033[1;5F", +1, 0},
{ XK_KP_End, ShiftMask, "\033[K", -1, 0},
{ XK_KP_End, ShiftMask, "\033[1;2F", +1, 0},
{ XK_KP_End, XK_ANY_MOD, "\033[4~", 0, 0},
{ XK_KP_Next, ShiftMask, "\033[6;2~", 0, 0},
{ XK_KP_Next, XK_ANY_MOD, "\033[6~", 0, 0},
{ XK_KP_Insert, ShiftMask, "\033[2;2~", +1, 0},
{ XK_KP_Insert, ShiftMask, "\033[4l", -1, 0},
{ XK_KP_Insert, ControlMask, "\033[L", -1, 0},
{ XK_KP_Insert, ControlMask, "\033[2;5~", +1, 0},
{ XK_KP_Insert, XK_ANY_MOD, "\033[4h", -1, 0},
{ XK_KP_Insert, XK_ANY_MOD, "\033[2~", +1, 0},
{ XK_KP_Delete, ControlMask, "\033[M", -1, 0},
{ XK_KP_Delete, ControlMask, "\033[3;5~", +1, 0},
{ XK_KP_Delete, ShiftMask, "\033[2K", -1, 0},
{ XK_KP_Delete, ShiftMask, "\033[3;2~", +1, 0},
{ XK_KP_Delete, XK_ANY_MOD, "\033[P", -1, 0},
{ XK_KP_Delete, XK_ANY_MOD, "\033[3~", +1, 0},
{ XK_KP_Multiply, XK_ANY_MOD, "\033Oj", +2, 0},
{ XK_KP_Add, XK_ANY_MOD, "\033Ok", +2, 0},
{ XK_KP_Enter, XK_ANY_MOD, "\033OM", +2, 0},
{ XK_KP_Enter, XK_ANY_MOD, "\r", -1, 0},
{ XK_KP_Subtract, XK_ANY_MOD, "\033Om", +2, 0},
{ XK_KP_Decimal, XK_ANY_MOD, "\033On", +2, 0},
{ XK_KP_Divide, XK_ANY_MOD, "\033Oo", +2, 0},
{ XK_KP_0, XK_ANY_MOD, "\033Op", +2, 0},
{ XK_KP_1, XK_ANY_MOD, "\033Oq", +2, 0},
{ XK_KP_2, XK_ANY_MOD, "\033Or", +2, 0},
{ XK_KP_3, XK_ANY_MOD, "\033Os", +2, 0},
{ XK_KP_4, XK_ANY_MOD, "\033Ot", +2, 0},
{ XK_KP_5, XK_ANY_MOD, "\033Ou", +2, 0},
{ XK_KP_6, XK_ANY_MOD, "\033Ov", +2, 0},
{ XK_KP_7, XK_ANY_MOD, "\033Ow", +2, 0},
{ XK_KP_8, XK_ANY_MOD, "\033Ox", +2, 0},
{ XK_KP_9, XK_ANY_MOD, "\033Oy", +2, 0},
{ XK_Up, ShiftMask, "\033[1;2A", 0, 0},
{ XK_Up, Mod1Mask, "\033[1;3A", 0, 0},
{ XK_Up, ShiftMask|Mod1Mask,"\033[1;4A", 0, 0},
{ XK_Up, ControlMask, "\033[1;5A", 0, 0},
{ XK_Up, ShiftMask|ControlMask,"\033[1;6A", 0, 0},
{ XK_Up, ControlMask|Mod1Mask,"\033[1;7A", 0, 0},
{ XK_Up,ShiftMask|ControlMask|Mod1Mask,"\033[1;8A", 0, 0},
{ XK_Up, XK_ANY_MOD, "\033[A", 0, -1},
{ XK_Up, XK_ANY_MOD, "\033OA", 0, +1},
{ XK_Down, ShiftMask, "\033[1;2B", 0, 0},
{ XK_Down, Mod1Mask, "\033[1;3B", 0, 0},
{ XK_Down, ShiftMask|Mod1Mask,"\033[1;4B", 0, 0},
{ XK_Down, ControlMask, "\033[1;5B", 0, 0},
{ XK_Down, ShiftMask|ControlMask,"\033[1;6B", 0, 0},
{ XK_Down, ControlMask|Mod1Mask,"\033[1;7B", 0, 0},
{ XK_Down,ShiftMask|ControlMask|Mod1Mask,"\033[1;8B",0, 0},
{ XK_Down, XK_ANY_MOD, "\033[B", 0, -1},
{ XK_Down, XK_ANY_MOD, "\033OB", 0, +1},
{ XK_Left, ShiftMask, "\033[1;2D", 0, 0},
{ XK_Left, Mod1Mask, "\033[1;3D", 0, 0},
{ XK_Left, ShiftMask|Mod1Mask,"\033[1;4D", 0, 0},
{ XK_Left, ControlMask, "\033[1;5D", 0, 0},
{ XK_Left, ShiftMask|ControlMask,"\033[1;6D", 0, 0},
{ XK_Left, ControlMask|Mod1Mask,"\033[1;7D", 0, 0},
{ XK_Left,ShiftMask|ControlMask|Mod1Mask,"\033[1;8D",0, 0},
{ XK_Left, XK_ANY_MOD, "\033[D", 0, -1},
{ XK_Left, XK_ANY_MOD, "\033OD", 0, +1},
{ XK_Right, ShiftMask, "\033[1;2C", 0, 0},
{ XK_Right, Mod1Mask, "\033[1;3C", 0, 0},
{ XK_Right, ShiftMask|Mod1Mask,"\033[1;4C", 0, 0},
{ XK_Right, ControlMask, "\033[1;5C", 0, 0},
{ XK_Right, ShiftMask|ControlMask,"\033[1;6C", 0, 0},
{ XK_Right, ControlMask|Mod1Mask,"\033[1;7C", 0, 0},
{ XK_Right,ShiftMask|ControlMask|Mod1Mask,"\033[1;8C",0, 0},
{ XK_Right, XK_ANY_MOD, "\033[C", 0, -1},
{ XK_Right, XK_ANY_MOD, "\033OC", 0, +1},
{ XK_ISO_Left_Tab, ShiftMask, "\033[Z", 0, 0},
{ XK_Return, Mod1Mask, "\033\r", 0, 0},
{ XK_Return, XK_ANY_MOD, "\r", 0, 0},
{ XK_Insert, ShiftMask, "\033[4l", -1, 0},
{ XK_Insert, ShiftMask, "\033[2;2~", +1, 0},
{ XK_Insert, ControlMask, "\033[L", -1, 0},
{ XK_Insert, ControlMask, "\033[2;5~", +1, 0},
{ XK_Insert, XK_ANY_MOD, "\033[4h", -1, 0},
{ XK_Insert, XK_ANY_MOD, "\033[2~", +1, 0},
{ XK_Delete, ControlMask, "\033[M", -1, 0},
{ XK_Delete, ControlMask, "\033[3;5~", +1, 0},
{ XK_Delete, ShiftMask, "\033[2K", -1, 0},
{ XK_Delete, ShiftMask, "\033[3;2~", +1, 0},
{ XK_Delete, XK_ANY_MOD, "\033[P", -1, 0},
{ XK_Delete, XK_ANY_MOD, "\033[3~", +1, 0},
{ XK_BackSpace, XK_NO_MOD, "\177", 0, 0},
{ XK_BackSpace, Mod1Mask, "\033\177", 0, 0},
{ XK_Home, ShiftMask, "\033[2J", 0, -1},
{ XK_Home, ShiftMask, "\033[1;2H", 0, +1},
{ XK_Home, XK_ANY_MOD, "\033[H", 0, -1},
{ XK_Home, XK_ANY_MOD, "\033[1~", 0, +1},
{ XK_End, ControlMask, "\033[J", -1, 0},
{ XK_End, ControlMask, "\033[1;5F", +1, 0},
{ XK_End, ShiftMask, "\033[K", -1, 0},
{ XK_End, ShiftMask, "\033[1;2F", +1, 0},
{ XK_End, XK_ANY_MOD, "\033[4~", 0, 0},
{ XK_Prior, ControlMask, "\033[5;5~", 0, 0},
{ XK_Prior, ShiftMask, "\033[5;2~", 0, 0},
{ XK_Prior, XK_ANY_MOD, "\033[5~", 0, 0},
{ XK_Next, ControlMask, "\033[6;5~", 0, 0},
{ XK_Next, ShiftMask, "\033[6;2~", 0, 0},
{ XK_Next, XK_ANY_MOD, "\033[6~", 0, 0},
{ XK_F1, XK_NO_MOD, "\033OP" , 0, 0},
{ XK_F1, /* F13 */ ShiftMask, "\033[1;2P", 0, 0},
{ XK_F1, /* F25 */ ControlMask, "\033[1;5P", 0, 0},
{ XK_F1, /* F37 */ Mod4Mask, "\033[1;6P", 0, 0},
{ XK_F1, /* F49 */ Mod1Mask, "\033[1;3P", 0, 0},
{ XK_F1, /* F61 */ Mod3Mask, "\033[1;4P", 0, 0},
{ XK_F2, XK_NO_MOD, "\033OQ" , 0, 0},
{ XK_F2, /* F14 */ ShiftMask, "\033[1;2Q", 0, 0},
{ XK_F2, /* F26 */ ControlMask, "\033[1;5Q", 0, 0},
{ XK_F2, /* F38 */ Mod4Mask, "\033[1;6Q", 0, 0},
{ XK_F2, /* F50 */ Mod1Mask, "\033[1;3Q", 0, 0},
{ XK_F2, /* F62 */ Mod3Mask, "\033[1;4Q", 0, 0},
{ XK_F3, XK_NO_MOD, "\033OR" , 0, 0},
{ XK_F3, /* F15 */ ShiftMask, "\033[1;2R", 0, 0},
{ XK_F3, /* F27 */ ControlMask, "\033[1;5R", 0, 0},
{ XK_F3, /* F39 */ Mod4Mask, "\033[1;6R", 0, 0},
{ XK_F3, /* F51 */ Mod1Mask, "\033[1;3R", 0, 0},
{ XK_F3, /* F63 */ Mod3Mask, "\033[1;4R", 0, 0},
{ XK_F4, XK_NO_MOD, "\033OS" , 0, 0},
{ XK_F4, /* F16 */ ShiftMask, "\033[1;2S", 0, 0},
{ XK_F4, /* F28 */ ControlMask, "\033[1;5S", 0, 0},
{ XK_F4, /* F40 */ Mod4Mask, "\033[1;6S", 0, 0},
{ XK_F4, /* F52 */ Mod1Mask, "\033[1;3S", 0, 0},
{ XK_F5, XK_NO_MOD, "\033[15~", 0, 0},
{ XK_F5, /* F17 */ ShiftMask, "\033[15;2~", 0, 0},
{ XK_F5, /* F29 */ ControlMask, "\033[15;5~", 0, 0},
{ XK_F5, /* F41 */ Mod4Mask, "\033[15;6~", 0, 0},
{ XK_F5, /* F53 */ Mod1Mask, "\033[15;3~", 0, 0},
{ XK_F6, XK_NO_MOD, "\033[17~", 0, 0},
{ XK_F6, /* F18 */ ShiftMask, "\033[17;2~", 0, 0},
{ XK_F6, /* F30 */ ControlMask, "\033[17;5~", 0, 0},
{ XK_F6, /* F42 */ Mod4Mask, "\033[17;6~", 0, 0},
{ XK_F6, /* F54 */ Mod1Mask, "\033[17;3~", 0, 0},
{ XK_F7, XK_NO_MOD, "\033[18~", 0, 0},
{ XK_F7, /* F19 */ ShiftMask, "\033[18;2~", 0, 0},
{ XK_F7, /* F31 */ ControlMask, "\033[18;5~", 0, 0},
{ XK_F7, /* F43 */ Mod4Mask, "\033[18;6~", 0, 0},
{ XK_F7, /* F55 */ Mod1Mask, "\033[18;3~", 0, 0},
{ XK_F8, XK_NO_MOD, "\033[19~", 0, 0},
{ XK_F8, /* F20 */ ShiftMask, "\033[19;2~", 0, 0},
{ XK_F8, /* F32 */ ControlMask, "\033[19;5~", 0, 0},
{ XK_F8, /* F44 */ Mod4Mask, "\033[19;6~", 0, 0},
{ XK_F8, /* F56 */ Mod1Mask, "\033[19;3~", 0, 0},
{ XK_F9, XK_NO_MOD, "\033[20~", 0, 0},
{ XK_F9, /* F21 */ ShiftMask, "\033[20;2~", 0, 0},
{ XK_F9, /* F33 */ ControlMask, "\033[20;5~", 0, 0},
{ XK_F9, /* F45 */ Mod4Mask, "\033[20;6~", 0, 0},
{ XK_F9, /* F57 */ Mod1Mask, "\033[20;3~", 0, 0},
{ XK_F10, XK_NO_MOD, "\033[21~", 0, 0},
{ XK_F10, /* F22 */ ShiftMask, "\033[21;2~", 0, 0},
{ XK_F10, /* F34 */ ControlMask, "\033[21;5~", 0, 0},
{ XK_F10, /* F46 */ Mod4Mask, "\033[21;6~", 0, 0},
{ XK_F10, /* F58 */ Mod1Mask, "\033[21;3~", 0, 0},
{ XK_F11, XK_NO_MOD, "\033[23~", 0, 0},
{ XK_F11, /* F23 */ ShiftMask, "\033[23;2~", 0, 0},
{ XK_F11, /* F35 */ ControlMask, "\033[23;5~", 0, 0},
{ XK_F11, /* F47 */ Mod4Mask, "\033[23;6~", 0, 0},
{ XK_F11, /* F59 */ Mod1Mask, "\033[23;3~", 0, 0},
{ XK_F12, XK_NO_MOD, "\033[24~", 0, 0},
{ XK_F12, /* F24 */ ShiftMask, "\033[24;2~", 0, 0},
{ XK_F12, /* F36 */ ControlMask, "\033[24;5~", 0, 0},
{ XK_F12, /* F48 */ Mod4Mask, "\033[24;6~", 0, 0},
{ XK_F12, /* F60 */ Mod1Mask, "\033[24;3~", 0, 0},
{ XK_F13, XK_NO_MOD, "\033[1;2P", 0, 0},
{ XK_F14, XK_NO_MOD, "\033[1;2Q", 0, 0},
{ XK_F15, XK_NO_MOD, "\033[1;2R", 0, 0},
{ XK_F16, XK_NO_MOD, "\033[1;2S", 0, 0},
{ XK_F17, XK_NO_MOD, "\033[15;2~", 0, 0},
{ XK_F18, XK_NO_MOD, "\033[17;2~", 0, 0},
{ XK_F19, XK_NO_MOD, "\033[18;2~", 0, 0},
{ XK_F20, XK_NO_MOD, "\033[19;2~", 0, 0},
{ XK_F21, XK_NO_MOD, "\033[20;2~", 0, 0},
{ XK_F22, XK_NO_MOD, "\033[21;2~", 0, 0},
{ XK_F23, XK_NO_MOD, "\033[23;2~", 0, 0},
{ XK_F24, XK_NO_MOD, "\033[24;2~", 0, 0},
{ XK_F25, XK_NO_MOD, "\033[1;5P", 0, 0},
{ XK_F26, XK_NO_MOD, "\033[1;5Q", 0, 0},
{ XK_F27, XK_NO_MOD, "\033[1;5R", 0, 0},
{ XK_F28, XK_NO_MOD, "\033[1;5S", 0, 0},
{ XK_F29, XK_NO_MOD, "\033[15;5~", 0, 0},
{ XK_F30, XK_NO_MOD, "\033[17;5~", 0, 0},
{ XK_F31, XK_NO_MOD, "\033[18;5~", 0, 0},
{ XK_F32, XK_NO_MOD, "\033[19;5~", 0, 0},
{ XK_F33, XK_NO_MOD, "\033[20;5~", 0, 0},
{ XK_F34, XK_NO_MOD, "\033[21;5~", 0, 0},
{ XK_F35, XK_NO_MOD, "\033[23;5~", 0, 0},
};
/*
* Selection types' masks.
* Use the same masks as usual.
* Button1Mask is always unset, to make masks match between ButtonPress.
* ButtonRelease and MotionNotify.
* If no match is found, regular selection is used.
*/
static uint selmasks[] = {
[SEL_RECTANGULAR] = Mod1Mask,
};
/*
* Printable characters in ASCII, used to estimate the advance width
* of single wide characters.
*/
static char ascii_printable[] =
" !\"#$%&'()*+,-./0123456789:;<=>?"
"@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_"
"`abcdefghijklmnopqrstuvwxyz{|}~";
xresources too
siduck
commented
3 years ago show me the output of this command
fc-list | grep -i "JetBrainsMono Nerd Font"
makerio90
commented
3 years ago /home/makerio/.local/share/fonts/JetBrainsMonoNerdFontCompleteBandit-Medium.ttf: JetBrainsMono Nerd Font Bandit:style=Medium,Regular
siduck
commented
3 years ago this looks like a custom jetbrainsmono font
try JetBrainsMono Nerd Font Bandit in xresources
makerio90
commented
3 years ago ok
siduck
commented
3 years ago is this issue fixed?
makerio90
commented
3 years ago yes
the chars seem to be randomly spaced