search

siemens / meta-iot2000

SIMATIC IOT2000 Yocto Board Support Package
Other
127 stars 85 forks source link

python-error after building example image #140

Closed IoTcreator closed 4 years ago

IoTcreator commented 5 years ago

Hello guys, after i typed in an executed the command kas build meta-iot2000/kas-example.yml to build the example image i get the errror:

TypeError: signal handler must be signal.SIG_IGN, signal SIG_DFL, or a callable object. error_Python_kas

I searched nearly every forum that i can find about that issue but no solution is working for me so far. I hope u can help out. Thanks in advance! Best regards!

[ Im using an IoT2040 with an Linux Yocto image on it, provided by siemens. Example-image: https://support.industry.siemens.com/cs/document/109741799/simatic-iot2000-sd-card-example-image?dti=0&lc=en-WW ]

jan-kiszka commented 5 years ago

See https://support.industry.siemens.com/tf/ww/en/posts/python-error-on-trying-to-build-own-image/223168/?page=0&pageSize=10. And I also suspect that the first error (always read from the start, not the end, when parsing errors) is different. Eg. there is no git.