search

siemens / meta-iot2050

SIMATIC IOT2050 Isar/Debian Board Support Package
MIT License
131 stars 77 forks source link

Digital input node from Siemens cusing Node-Red to abort #250

Closed MohammadKurdia closed 1 year ago

MohammadKurdia commented 2 years ago

I have a configuration where 6 digital inputs are connected to 6 digital outputs.

When I turn on and off the digital output, I read the signal in node red using the Digital input node provided from Siemens.

But after some minutes of running this flow, Node-Red aborts for some reason !!

Node-Red_Abort_Message

I replaced these digital input nodes with exec nodes with "Mraa" commands in them. and now it's working fine.

jan-kiszka commented 2 years ago

Uhh... which image version?

MohammadKurdia commented 2 years ago

Example image V1.1.1

jan-kiszka commented 2 years ago

Can you re-check with V1.2.1 as well? Note that this requires a firmware update as well.

MohammadKurdia commented 2 years ago

Where can I find the V1.2.1 ?

jan-kiszka commented 2 years ago

Not yet uploaded apparently... Please request via forum, direct message to bergmanu. Both the image and the firmware update package.

jan-kiszka commented 1 year ago

I suppose this was resolved by now.