Closed Jam-boy closed 4 years ago
完璧なIssueの作成ありがとうございます! 問題を調査したところ、特定のノードの組み合わせで問題が発生することを確認しました。 問題は修正済みで、数日中にアップデートにて配信します! よろしくお願いいたします。
Thank you for creating the perfect Issue! After investigating the issue, we found that the issue occurred with a particular combination of nodes. The problem has been fixed and will be delivered as an update in the coming days! Thank you.
ありがとうございます!楽しみです!
Thank you! I'm looking forward to it!
We have released 1.1.2 and supported them. For details, see the release notes. https://sigboost.audio/midiglue/manual/download/#v112
1.1.2で対応しました! 詳細はリリースノートを御覧ください。
開発者様へ
こんにちは! とても刺激的な製品で、とても楽しいです。 応援しております!
さて、掲題につきまして。 添付したフロー「delay_test.flow」をご確認ください。 これはプリセットの「delay.flow」に対し、 「note2cv.node」を追加したものです。 このフローを使ってディレイの動作を確認したところ ディレイが効かなる事象が見受けられました。 ご確認のほどよろしくお願いいたいます。
■使用環境 PC: Mac 10.13.6(17G6030) MIDI source: USB HOST(KORG "nano KONTROL2" . LEDの設定は[external])
■再現 ・delay_test.flowを活性化します ・Midiglue側のパラメータ設定 →「OUT:[HOST]」へ設定 →「Dry:[On]」へ設定 ・USB HOST 側から何かしらのnote信号を送ります。 ・その結果、押した時にのみLEDが発光(遅延発光なし) ※「delay.flow」であれば、上記の手順を実施すると、 遅延分の発光も確認できます。
以上よろしくお願いいたします。
======google Trancelate====== For developers
Hello! It's a very exciting product and a lot of fun. I support you!
Now, regarding the subject. Please check the attached flow "delay_test.flow". This is for the preset "delay.flow", "Note2cv.node" is added. After confirming the delay operation using this flow The phenomenon that the delay works was found. Thank you for your confirmation.
■ Usage environment PC: Mac 10.13.6 (17G6030) MIDI source: USB HOST (KORG "nano KONTROL2". LED setting is [external])
■ Reproduction ・ Activate delay_test.flow ・ Midiglue side parameter setting → Set to “OUT: [HOST]” → Set to “Dry: [On]” -Some note signal is sent from the USB HOST side. ・ As a result, the LED emits light only when pressed (no delayed emission)
Thank you for your cooperation.
delay_test.flow.zip