Hi,
I had the controller changed on my RHP 600 U unit and now the heat pump level doesn't update as it did.
(Not sure if this isn't in fact how it worked before, but I didn't notice...)
This is the firmware version:
Everything else seems to be updating and working fine, but there is an issue with the heat pump level.
Sometimes the web page shows heat pump is running at 65-100% but in HA it's 0%, but sometimes it's correctly shown in HA as -100%.
Here's a graph of the heat pump level aligned with the power consumption (when it's using 700W, it's running):
It's obvious the heat pump is running but it's not visible in HA.
As a side note, it might be related to the other things the unit is "trying" to use to cool the air (DX, water cooling):
I noticed the heat pump level on the web page jumps to 65% then slowly grows to 100%
If possible to get the "blue" value, which seems to be the requested value, it would at least let me know the pump is running, even if it's in fact running at 100%, not 65, 70, etc...
Hi, I had the controller changed on my RHP 600 U unit and now the heat pump level doesn't update as it did. (Not sure if this isn't in fact how it worked before, but I didn't notice...) This is the firmware version:
Everything else seems to be updating and working fine, but there is an issue with the heat pump level. Sometimes the web page shows heat pump is running at 65-100% but in HA it's 0%, but sometimes it's correctly shown in HA as -100%. Here's a graph of the heat pump level aligned with the power consumption (when it's using 700W, it's running):
It's obvious the heat pump is running but it's not visible in HA.
As a side note, it might be related to the other things the unit is "trying" to use to cool the air (DX, water cooling):
I noticed the heat pump level on the web page jumps to 65% then slowly grows to 100%
If possible to get the "blue" value, which seems to be the requested value, it would at least let me know the pump is running, even if it's in fact running at 100%, not 65, 70, etc...