Multistar 4225 390kv motors and Afro 30amp opto esc's can't fix sync issues.

sim- / tgy

tgy -- Open Source Firmware for ATmega-based Brushless ESCs

http://0x.ca/tgy/

686 stars 388 forks source link

Multistar 4225 390kv motors and Afro 30amp opto esc's can't fix sync issues. #77

Open Paulo-uk opened 9 years ago

Paulo-uk commented 9 years ago

Hi Simon, Im using the following setup and having lots of syncing issues - Please help:

Multistar 4225 390kv motors Afro 30amp opto esc's 6s 5000mah 35c Lipo 12x6 props

Is there a recommended firmware version that will work here or am I doomed?

Thank you in advance.

Paulo

sim- commented 9 years ago

Hi Paulo,

No, I don't think so. I have similar motors and ESCs and it works for me. Which flight controller are you using, and did you try updating to the latest firmware?

Simon-

sim- commented 8 years ago

Hi, Paulo! Sorry for the delay. If you still have this problem, I'm curious if twisting the servo cable (just twist it around by hand until it begins to buckle) and then re-attaching it to the flight controller makes any difference or not for you.

If you've solved it another way, or if you've given up in the meantime, I'm also interested to hear. Thanks!

Paulo-uk commented 8 years ago

Hi Simon, Im afraid I had to switch escs. Thanks anyway

sim- commented 8 years ago

Ok, no problem. Which ones ended up working?