search

simeononsecurity / simeononsecurity.com-comments

Just here to use as a serverless comment host for simeononsecurity.ch
https://simeononsecurity.com
1 stars 0 forks source link

https://simeononsecurity.com/guides/budget-diy-gps-gnss-base-station-setup-esp32-um980/ #18

Open utterances-bot opened 3 weeks ago

utterances-bot commented 3 weeks ago

Budget DIY GPS/GNSS Base Station / Receiver and NTRIP Server Client with ESP32 and UM980

Effortlessly set up a budget DIY GPS/GNSS base station and NTRIP Server / NTRIP Client using ESP32 and the Unicorecomm UM980 for accurate positioning.

https://simeononsecurity.com/guides/budget-diy-gps-gnss-base-station-setup-esp32-um980/

Manivarashi commented 3 weeks ago

i would like to know. if what we are building is base, do we need same equipment as a rover that goes on the drone? If thats the case, the cost doubles. or what goes on the drone. My budget is limited.

simeononsecurity commented 3 weeks ago

i would like to know. if what we are building is base, do we need same equipment as a rover that goes on the drone? If thats the case, the cost doubles. or what goes on the drone. My budget is limited.

For drones my experience is more limited. It really just depends on what format the drone needs the information in. I can't speak for the drone hardware side of things. But usually you'll need a lesser powered gps unit and something to give it network connectivity at least. So as far as gps hardware goes specifically, costs should be much lower on the rtk receiver at least. Unless you're talking about surveying, then you probably will need similar hardware on both sides if not even better.

Manivarashi commented 3 weeks ago

I Want to for 3d mapping with lidar, i can implement a ras pi on board and log lidar data with gps ones.

On Sun, Aug 18, 2024 at 6:33 AM SimeonOnSecurity @.***> wrote:

i would like to know. if what we are building is base, do we need same equipment as a rover that goes on the drone? If thats the case, the cost doubles. or what goes on the drone. My budget is limited.

For drones my experience is more limited. It really just depends on what format the drone needs the information in. I can't speak for the drone hardware side of things. But usually you'll need a lesser powered gps unit and something to give it network connectivity at least. So as far as gps hardware goes specifically, costs should be much lower on the rtk receiver at least. Unless you're talking about surveying, then you probably will need similar hardware on both sides if not even better.

— Reply to this email directly, view it on GitHub https://github.com/simeononsecurity/simeononsecurity.com-comments/issues/18#issuecomment-2295049525, or unsubscribe https://github.com/notifications/unsubscribe-auth/ANSS3FKUVT6OMWMOF2FQEKTZR7XEPAVCNFSM6AAAAABMVOGLAOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEOJVGA2DSNJSGU . You are receiving this because you commented.Message ID: <simeononsecurity/simeononsecurity.com-comments/issues/18/2295049525@ github.com>