Missing BOM elements - Githubissues

sinara-hw / EEM_PWR_MOD_AC

80-264V input range AC power module for EEM

2 stars 0 forks source link

Open gkasprow opened 3 years ago

gkasprow commented 3 years ago

Aapart from mechanic components already in the BOM, several other components are needed:

two cables connecting power module and the main board. One siede is Molex KK 2.54, the other side is TKP DH2 (4 pin)
two cables with M3.5 pan HD screw terminals on both ends
two M3 screws with washer compatible with 7461057 bushings

kaolpr commented 3 years ago

kaolpr commented 3 years ago

AC cable connecting power module and the main board, one side is KK 3.96mm Crimp Terminal Housing (mating with Molex 26-62-4030), the other side is JST VHR

gkasprow commented 3 years ago

JST VHR can be mated with Molex KK3.96

gkasprow commented 3 years ago

we need two 4-wire cables terminated with DF11-4DS-2C connectors. Contact PN is DF11-22SCA

gkasprow commented 3 years ago

the 8HP panels require special 0.1" offset handles, PN 20817-690

gkasprow commented 3 years ago

...and the 8HP panel must be special type, compatible with the handle: PN is 30848-430

gkasprow commented 3 years ago

We of course also need a standard set of components to attach the panel to the PCB: angle bracket plastic sleeves, M2.5 screws, etc.

gkasprow commented 3 years ago

Front panel part number should be 30848-430 (0,1" offset) with handle 20817-682 (0,1" offset). For rails 24560-359 (0,1" offset).