Open olajmuvek opened 2 years ago
Hi @olajmuvek
SinricPro Temperature sensor device type supports only temperature and humidity. pressure is not supported. If you are trying to hack the temperature sensor to show pressure then you have to live with %..
You could use a custom device template with a Range Controller to show numeric values again, Google Home does not support custom device types at this time only Alexa does.
To show inside/outside you have to create different devices.
Hy there. I want to use my sensor BMP-180 , with my esp8266. I can sense pressure, temperature too with this sensor. Can upload sensor data to SinricPro , and i can import data from you to my google home NICE work. Thanks for you to can made this with SinricPro But my pressure in hPa cannot be transfer correct. If i make a device template, cannot find Air Pressure option.
Meanwhile i use dallas ds18s20 temp sensors with 1-wire method. More sensors on 1 data cable. I have this type temperature sensors inside, outside, and more rooms. I want to add a template where i can set more than one temperature data. Indoor, outdoor etc I hope you can help. thanks![pressure](https://user-images.githubusercontent.com/46005072/174305261-b1101b18-d533-4da0-a8e4-fdb536c762ba.png)