Closed mobius closed 1 year ago
It is not well explained in the document:
Thanks, it works
Close this issue as it was solved and had no more updates.
It is not well explained in the document:
1. You need to connect a jumper to the 3V and BOOT pins on the board. 2. Hold BOOT button and tap RESET. Finally, release the BOOT button. 3. Burn the m0sense_udisk_bl702_v0.1.bin file located at https://dl.sipeed.com/shareURL/Maix-Zero/Maix-Zero/7_Example_demos/default_firmware/ 4. How to burn bin file : https://wiki.sipeed.com/hardware/en/maixzero/sense/start.html#Burn-bin-file 5. After burn remove the jumper
Best answer (👍^U^)👍
no usbdrive appears on win & linux