search

sipeed / Maixduino

Arduino port on Maix board ( k210 )
https://maixduino.sipeed.com
Other
213 stars 93 forks source link

no serial connection #119

Open Matritze opened 2 years ago

Matritze commented 2 years ago

Hey Maixfriends,

my problem is that I don't get a serial connection to my Maixduino anymore. After unsuccessful trying to upload a model into flash my display become white and up to this moment I cannot get any serial connection anymore. Flashing the firmware via kflash is not possible. After a few seconds an error message appears. During this time only the R-K210 LED is flashing, but not the T-K210. So I think the K210 does not send an answer via serial. Is there any other possibility to flash the FW? I fear that the firmware has been killed somehow.

sahinemreaslan commented 2 years ago

can you share the error message ?

sahinemreaslan commented 2 years ago

fixed ?

Matritze commented 2 years ago

I will share errormessage later this evening. When i am back at home.

Matritze commented 2 years ago

grafik That is the errormessage from kflash. The com-port was detected correctly before.

sahinemreaslan commented 2 years ago

On maixduino com3? Are you sure ? image usb serial port you should choose ? (foregoing example port 5 or port 6)

Matritze commented 2 years ago

The Port was 16. Think the error Massage displays always the same. Even on an other Computer with different Port the Massage was the same. The Port is not the problem. There comes no answer from the k210.

sahinemreaslan commented 2 years ago

I understood you. But I don't know how to solve it. Maybe even unsolvable.