Communication with the ESP32

[bmitov]

I have not been able to find much information on this :-( .

1. Does the ESP32 come preprogrammed with AT firmware, or do I have to burn it separately.
2. What pins it is connected to? I have seen that is it connected to D 6 and 7 of the K210. Is this correct?
3. What is the serial speed by default for the AT firmware if it comes programmed out of the box?

[chegewara]

I have not been using it for almost a year, so i forgot most of it, but afaik its using SPI, and esp32 should be (at least it was) programmed with fw that allows communication. More info you may find here: https://en.bbs.sipeed.com/

[bmitov]

Thank you @chegewara . What Chip Select is used to talk to the ESP32 from the K210 ? Do you happen to have some example code, or link to tutorial or something?

[chegewara]

This is python code, but i hpe it will help you: https://github.com/chegewara/sipeed-maixduino-test-apps/blob/master/platformIO/MaixPy/esp32-wifi.py

[chegewara]

You can also flash esp32 with your own FW. Here is very simple test that is using UART to communicate k210 with esp32. esp32 is flashed with custom fw: https://github.com/chegewara/sipeed-maixduino-test-apps/tree/master/platformIO/freertos/uart-to-esp32

btw, esp32 is pre-programmed with NINA firmware

[bmitov]

@chegewara I know that I can flash the ESP32 :-) I can even program it with Visuino . It is already supported. I did not want to override any factory code however. My question was what is on it factory ready? I wanted to test it before I override the code ;-)

[bmitov]

In essence if the ESP32 comes pre programmed with AT type firmware, then I can add the AT support on the K210 side in Visuino as a WiFi module. Otherwise, I will just leave it as Serial and SPI channels for the ESP32 and just allow boths sides to be programmed individually.

[chegewara]

Like i mentioned in other topic, its NINA. https://github.com/sipeed/Maixduino_esp32_fimware

[bmitov]

@chegewara Thank you so much! :-) It is programmed when it arrives right :-) I will test shortly.

[mattuna15]

If you want to use UART to send AT commands to the ESP32 you have to make the following changes. Download the Espressif AT firmware and change this file, then re-build and re-flash firmware:

components/customized_partitions/raw_data/factory_param/factory_param_data.csv

-PLATFORM_ESP32,WROOM-32,,0xfcfc,2,1,78,1,1,13,CN,115200,17,16,15,14,-1,-1
+PLATFORM_ESP32,WROOM-32,,0xfcfc,2,1,78,0,1,13,CN,115200,1,3,-1,-1,-1,-1

Then in the Arduino library, changes the pin mapping for pins 6 & 7 to k210 pins 6 & 7

Arduino15/packages/Maixduino/hardware/k210/0.3.11/variants/sipeed_maixduino/pins_arduino.h

static const uint8_t _maixduino_pin_map[17] = {4, 5, 21, 22, 23, 24, **6, 7,** 14, 13, 12, 11, 10, 3, 31, 30, 16};

Using these changes I can now use the internal UART between the k210 and ESP32 for AT commands. You can also still use the ESP32 directly.

Use this wifi esp library for arduino: WifiEspAT

Waiting for connection to WiFi
..
Connected to WiFi network.
Starting connection to server...
connected to server
HTTP/1.1 200 OK
Server: nginx/1.4.2
Date: Tue, 12 Jan 2021 08:50:17 GMT
Content-Type: text/plain
Content-Length: 2263
Last-Modified: Wed, 02 Oct 2013 13:46:47 GMT
Connection: close
Vary: Accept-Encoding
ETag: "524c23c7-8d7"
Accept-Ranges: bytes

           `:;;;,`                      .:;;:.           
        .;;;;;;;;;;;`                :;;;;;;;;;;:     TM 
      `;;;;;;;;;;;;;;;`            :;;;;;;;;;;;;;;;      
     :;;;;;;;;;;;;;;;;;;         `;;;;;;;;;;;;;;;;;;     
    ;;;;;;;;;;;;;;;;;;;;;       .;;;;;;;;;;;;;;;;;;;;    
   ;;;;;;;;:`   `;;;;;;;;;     ,;;;;;;;;.`   .;;;;;;;;   
  .;;;;;;,         :;;;;;;;   .;;;;;;;          ;;;;;;;  
  ;;;;;;             ;;;;;;;  ;;;;;;,            ;;;;;;. 
 ,;;;;;               ;;;;;;.;;;;;;`              ;;;;;; 
 ;;;;;.                ;;;;;;;;;;;`      ```       ;;;;;`
 ;;;;;                  ;;;;;;;;;,       ;;;       .;;;;;
`;;;;:                  `;;;;;;;;        ;;;        ;;;;;
,;;;;`    `,,,,,,,,      ;;;;;;;      .,,;;;,,,     ;;;;;
:;;;;`    .;;;;;;;;       ;;;;;,      :;;;;;;;;     ;;;;;
:;;;;`    .;;;;;;;;      `;;;;;;      :;;;;;;;;     ;;;;;
.;;;;.                   ;;;;;;;.        ;;;        ;;;;;
 ;;;;;                  ;;;;;;;;;        ;;;        ;;;;;
 ;;;;;                 .;;;;;;;;;;       ;;;       ;;;;;,
 ;;;;;;               `;;;;;;;;;;;;                ;;;;; 
 `;;;;;,             .;;;;;; ;;;;;;;              ;;;;;; 
  ;;;;;;:           :;;;;;;.  ;;;;;;;            ;;;;;;  
   ;;;;;;;`       .;;;;;;;,    ;;;;;;;;        ;;;;;;;:  
    ;;;;;;;;;:,:;;;;;;;;;:      ;;;;;;;;;;:,;;;;;;;;;;   
    `;;;;;;;;;;;;;;;;;;;.        ;;;;;;;;;;;;;;;;;;;;    
      ;;;;;;;;;;;;;;;;;           :;;;;;;;;;;;;;;;;:     
       ,;;;;;;;;;;;;;,              ;;;;;;;;;;;;;;       
         .;;;;;;;;;`                  ,;;;;;;;;:         

    ;;;   ;;;;;`  ;;;;:  .;;  ;; ,;;;;;, ;;. `;,  ;;;;   
    ;;;   ;;:;;;  ;;;;;; .;;  ;; ,;;;;;: ;;; `;, ;;;:;;  
   ,;:;   ;;  ;;  ;;  ;; .;;  ;;   ,;,   ;;;,`;, ;;  ;;  
   ;; ;:  ;;  ;;  ;;  ;; .;;  ;;   ,;,   ;;;;`;, ;;  ;;. 
   ;: ;;  ;;;;;:  ;;  ;; .;;  ;;   ,;,   ;;`;;;, ;;  ;;` 
  ,;;;;;  ;;`;;   ;;  ;; .;;  ;;   ,;,   ;; ;;;, ;;  ;;  
  ;;  ,;, ;; .;;  ;;;;;:  ;;;;;: ,;;;;;: ;;  ;;, ;;;;;;  
  ;;   ;; ;;  ;;` ;;;;.   `;;;:  ,;;;;;, ;;  ;;,  ;;;;   

disconnecting from server.

[ridvan70]

@chegewara I know that I can flash the ESP32 :-) I can even program it with Visuino . It is already supported. I did not want to override any factory code however. My question was what is on it factory ready? I wanted to test it before I override the code ;-)

I get the following information from a python script:

[esp32_spi] use soft spi 1.4.0

I bought mine in the first quarter of 2021.

There is new firmware 1.4.1 by Sipeed, https://dl.sipeed.com/shareURL/MAIX/factory_firmware/esp32 but could not flash it.

[romainreignier]

From the NINA source code, the ESP32 communicates through SPI and not a serial port with AT commands. I have managed to communicate it with the fork of WiFiEsp (branch esp32_spi) by @scpcom and using its fork of Maixduino.

[Embedd-sva]

Hello guys I want program to establish communication between k210 and esp32 using uart in platform io