[Gitalk:/hardware/en/lichee/th1520/lpi4a/3_images.html] 镜像集合 - Sipeed Wiki

dtometzki commented 1 year ago

https://wiki.sipeed.com/hardware/en/lichee/th1520/lpi4a/3_images.html

dtometzki commented 1 year ago

Hello together,

when is planned the next image release ?

Damian

wonderfullook commented 1 year ago

Maybe middle in this month, decrease browser error.

sieler commented 1 year ago

This page, https://wiki.sipeed.com/hardware/en/lichee/th1520/lpi4a/3_images.html, has a typo/error: "Account: root, debian, sipeed; passwords are all licheepi account debian, password debian; account sipeed, passwordlicheepi "

You can't have the account 'debian' have two different passwords :)

andysilva86 commented 1 year ago

Where is the link for Ubuntu project?

Hackswell commented 1 year ago

I have the June 2023 image burned. Is keeping Debian up-to-date with apt update/upgrade sufficient, or should I be re-flashing the images instead?

Hackswell commented 1 year ago

@andysilva86 Where is the link for Ubuntu project?

My guess is that it will appear here when it's alpha/beta quality: https://cdimage.ubuntu.com/releases/23.04/release/

pthacks commented 1 year ago

I am unable to flash any images as the device continuously connects and disconnects to any computer I connect to with any cable. Driver installation succeeded but flashing fails as the device is constantly connecting and disconnecting. Has anyone else encountered this issue?

wonderfullook commented 1 year ago

I am unable to flash any images as the device continuously connects and disconnects to any computer I connect to with any cable. Driver installation succeeded but flashing fails as the device is constantly connecting and disconnecting. Has anyone else encountered this issue?

There is an OS in this board. Connect with HDMI monitor and boot board to check if it works well.

pthacks commented 1 year ago

I am unable to flash any images as the device continuously connects and disconnects to any computer I connect to with any cable. Driver installation succeeded but flashing fails as the device is constantly connecting and disconnecting. Has anyone else encountered this issue?

There is an OS in this board. Connect with HDMI monitor and boot board to check if it works well.

It boots and successfully loads the desktop, though it is noted that Chromium cannot be opened and crashes on launch. After successfully booting, I have made additional attempts to image the board with the same result. The device is recognized by windows but disconnects and reconnects multiple times per second. Linux is unable to detect the device in imaging mode.

wu-yue-yu commented 1 year ago

I am unable to flash any images as the device continuously connects and disconnects to any computer I connect to with any cable. Driver installation succeeded but flashing fails as the device is constantly connecting and disconnecting. Has anyone else encountered this issue?

There is an OS in this board. Connect with HDMI monitor and boot board to check if it works well.

It boots and successfully loads the desktop, though it is noted that Chromium cannot be opened and crashes on launch. After successfully booting, I have made additional attempts to image the board with the same result. The device is recognized by windows but disconnects and reconnects multiple times per second. Linux is unable to detect the device in imaging mode.

Hi. When using type C power supply, do not use the interface on the front panel of the computer, and ensure that the interface has sufficient power supply to successfully burn the system. When connecting to HDMI to use a desktop system, it is best to use a 12V power supply, otherwise the machine may crash and restart due to insufficient power supply.

pthacks commented 1 year ago

Thank you for the response. The system exhibits the same behaviors when connected to the rear interface of the system, as well as when a 12V power supply or a 65W USB-C power supply is connected. It still connects and disconnects rapidly.

wu-yue-yu commented 1 year ago

Thank you for the response. The system exhibits the same behaviors when connected to the rear interface of the system, as well as when a 12V power supply or a 65W USB-C power supply is connected. It still connects and disconnects rapidly.

Are u using the 8+8 version? And I encountered the situation before, it was because my rear interface of my pc was connected with too many devices, leading to insufficient power supply. Maybe u should check this? Another possibility is that the boot button is stuck.

pthacks commented 1 year ago

Thank you for the excellent ideas. I figured it was some sort of power issue and began trying to remove everything from the rear interface of my pc. It seemed to reduce the frequency of the disconnects but not stop them completely. In further troubleshooting I realized the disconnects could be prevented by putting downward pressure on the USB-C cable. It appears that the USB-C connector on the board was faulty or maybe had some debris in it, because after cycling it many times it now works mostly normal and I was able to successfully flash an image. Thank you again!

wu-yue-yu commented 1 year ago

Thank you for the excellent ideas. I figured it was some sort of power issue and began trying to remove everything from the rear interface of my pc. It seemed to reduce the frequency of the disconnects but not stop them completely. In further troubleshooting I realized the disconnects could be prevented by putting downward pressure on the USB-C cable. It appears that the USB-C connector on the board was faulty or maybe had some debris in it, because after cycling it many times it now works mostly normal and I was able to successfully flash an image. Thank you again!

You're welcome, glad that ur problem is solved ^ ^

varyhin commented 1 year ago

Highly need an official sipeed image without GUI.

vladimir-dudnik-1 commented 1 year ago

I've tried official images from 20231023, basic and full. Was able to burn and boot into basic image, everything work as expected. But got issue trying to boot full image, error reported in debug console: [ 5.198842] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance.

Could anyone help to solve this issue?

complete log is below:

brom_ver 8
[APP][E] protocol_connect failed, exit.
-------------------------------------------------------
  _____             _    _____ _                     _
 |  __ \           (_)  / ____(_)                   | |
 | |__) _   _ _   _ _  | (___  _ _ __   ___  ___  __| |
 |  _  | | | | | | | |  \___ \| | '_ \ / _ \/ _ \/ _` |
 | | \ | |_| | |_| | |  ____) | | |_) |  __|  __| (_| |
 |_|  \_\__,_|\__, |_| |_____/|_| .__/ \___|\___|\__,_|
               __/ |            | |
              |___/             |_|
                       -- Presented by ISCAS and Sipeed
-------------------------------------------------------

U-Boot SPL 2020.01-ga50d8b9d (Oct 13 2023 - 02:45:18 +0000)
FM[1] lpddr4x dualrank freq=3733 64bit dbi_off=n sdram init
ddr initialized, jump to uboot
image has no header

U-Boot 2020.01-ga50d8b9d (Oct 13 2023 - 02:45:18 +0000)

CPU:   rv64imafdcvsu
Model: T-HEAD c910 light
DRAM:  16 GiB
C910 CPU FREQ: 750MHz
AHB2_CPUSYS_HCLK FREQ: 250MHz
AHB3_CPUSYS_PCLK FREQ: 125MHz
PERISYS_AHB_HCLK FREQ: 250MHz
PERISYS_APB_PCLK FREQ: 62MHz
GMAC PLL POSTDIV FREQ: 1000MHZ
DPU0 PLL POSTDIV FREQ: 1188MHZ
DPU1 PLL POSTDIV FREQ: 1188MHZ
MMC:   sdhci@ffe7080000: 0, sd@ffe7090000: 1
Loading Environment from MMC... OK
Error reading output register
Warning: cannot get lcd-en GPIO
LCD panel cannot be found : -121
splash screen startup cost 16 ms
In:    serial
Out:   serial
Err:   serial
Net:   ethernet@ffe7070000 (eth0) using MAC address - 48:da:35:60:00:09
eth0: ethernet@ffe7070000ethernet@ffe7070000:0 is connected to ethernet@ffe7070000.  Reconnecting to ethernet@ffe7060000
ethernet@ffe7060000 (eth1) using MAC address - 48:da:35:60:00:0a
, eth1: ethernet@ffe7060000
Hit any key to stop autoboot:  0
## Error: "findpart" not defined
50340 bytes read in 1 ms (48 MiB/s)
6117904 bytes read in 19 ms (307.1 MiB/s)
86040 bytes read in 2 ms (41 MiB/s)
Retrieving file: /extlinux/extlinux.conf
1136 bytes read in 1 ms (1.1 MiB/s)
U-Boot menu
1:      RevyOS GNU/Linux 5.10.113-lpi4a (HDMI only)
2:      RevyOS GNU/Linux 5.10.113-lpi4a (HDMI and MIPI)
3:      RevyOS GNU/Linux 5.10.113-lpi4a (rescue target)
Enter choice: 1
1:      RevyOS GNU/Linux 5.10.113-lpi4a (HDMI only)
Retrieving file: /Image
23152640 bytes read in 72 ms (306.7 MiB/s)
append: root=/dev/mmcblk0p3 console=ttyS0,115200 rootwait rw earlycon clk_ignore_unused loglevel=7 eth= rootrwoptions=rw,noatime rootrwreset=yes
Retrieving file: /dtbs/linux-image-5.10.113-lpi4a/thead/light-lpi4a-16gb.dtb
78164 bytes read in 2 ms (37.3 MiB/s)
## Flattened Device Tree blob at 02800000
   Booting using the fdt blob at 0x2800000
   Using Device Tree in place at 0000000002800000, end 0000000002816153

Starting kernel ...

OpenSBI v0.9
   ____                    _____ ____ _____
  / __ \                  / ____|  _ \_   _|
 | |  | |_ __   ___ _ __ | (___ | |_) || |
 | |  | | '_ \ / _ \ '_ \ \___ \|  _ < | |
 | |__| | |_) |  __/ | | |____) | |_) || |_
  \____/| .__/ \___|_| |_|_____/|____/_____|
        | |
        |_|

Platform Name             : Sipeed Lichee Pi 4A configuration for 16GB DDR board
Platform Features         : mfdeleg
Platform HART Count       : 4
Platform IPI Device       : clint
Platform Timer Device     : clint
Platform Console Device   : uart8250
Platform HSM Device       : ---
Platform SysReset Device  : thead_reset
Firmware Base             : 0x0
Firmware Size             : 136 KB
Runtime SBI Version       : 0.3

Domain0 Name              : root
Domain0 Boot HART         : 0
Domain0 HARTs             : 0*,1*,2*,3*
Domain0 Region00          : 0x000000ffdc000000-0x000000ffdc00ffff (I)
Domain0 Region01          : 0x0000000000000000-0x000000000003ffff ()
Domain0 Region02          : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address      : 0x0000000000200000
Domain0 Next Arg1         : 0x0000000002800000
Domain0 Next Mode         : S-mode
Domain0 SysReset          : yes

Boot HART ID              : 0
Boot HART Domain          : root
Boot HART ISA             : rv64imafdcvsux
Boot HART Features        : scounteren,mcounteren,time
Boot HART PMP Count       : 0
Boot HART PMP Granularity : 0
Boot HART PMP Address Bits: 0
Boot HART MHPM Count      : 16
Boot HART MHPM Count      : 16
Boot HART MIDELEG         : 0x0000000000000222
Boot HART MEDELEG         : 0x000000000000b109
[    0.000000] Linux version 5.10.113+ (ubuntu@ubuntu-2204-buildserver) (riscv64-unknown-linux-gnu-gcc (Xuantie-900 linux-5.10.4 glibc gcc Toolchain V2.6.1 B-20220906) 10.2.0, GNU ld (GNU Binutils) 2.35) #4 SMP PREEMPT Fri Oct 20 06:59:14 UTC 2023
[    0.000000] earlycon: uart0 at MMIO32 0x000000ffe7014000 (options '115200n8')
[    0.000000] printk: bootconsole [uart0] enabled
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x00000003e4000000, size 320 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000200000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000003ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x000000000fffffff]
[    0.000000]   node   0: [mem 0x0000000010000000-0x00000000166fffff]
[    0.000000]   node   0: [mem 0x0000000016700000-0x0000000016ffffff]
[    0.000000]   node   0: [mem 0x0000000017000000-0x0000000018ffffff]
[    0.000000]   node   0: [mem 0x0000000019000000-0x000000001bffffff]
[    0.000000]   node   0: [mem 0x000000001c000000-0x000000001e00ffff]
[    0.000000]   node   0: [mem 0x000000001e010000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020000000-0x00000000207fffff]
[    0.000000]   node   0: [mem 0x0000000020800000-0x0000000031ffffff]
[    0.000000]   node   0: [mem 0x0000000032000000-0x00000000383fffff]
[    0.000000]   node   0: [mem 0x0000000038400000-0x00000003ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000003ffffffff]
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] SBI specification v0.3 detected
[    0.000000] SBI implementation ID=0x1 Version=0x9
[    0.000000] SBI v0.2 TIME extension detected
[    0.000000] SBI v0.2 IPI extension detected
[    0.000000] SBI v0.2 RFENCE extension detected
[    0.000000] SBI v0.2 HSM extension detected
[    0.000000] riscv: ISA extensions acdfimsuv
[    0.000000] riscv: ELF capabilities acdfimv
[    0.000000] percpu: Embedded 27 pages/cpu s73560 r8192 d28840 u110592
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4128264
[    0.000000] Kernel command line: root=/dev/mmcblk0p3 console=ttyS0,115200 rootwait rw earlycon clk_ignore_unused loglevel=7 eth= rootrwoptions=rw,noatime rootrwreset=yes
[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Sorting __ex_table...
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 15788944K/16775168K available (12099K kernel code, 4236K rwdata, 4096K rodata, 331K init, 512K bss, 658544K reserved, 327680K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] riscv-intc: 64 local interrupts mapped
[    0.000000] plic: interrupt-controller@ffd8000000: mapped 64 interrupts with 4 handlers for 8 contexts.
[    0.000000] random: get_random_bytes called from start_kernel+0x372/0x4d4 with crng_init=0
[    0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [0]
[    0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1623fa770, max_idle_ns: 881590404476 ns
[    0.000009] sched_clock: 64 bits at 3000kHz, resolution 333ns, wraps every 4398046511097ns
[    0.008739] Console: colour dummy device 80x25
[    0.013276] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=12000)
[    0.023487] pid_max: default: 32768 minimum: 301
[    0.028334] LSM: Security Framework initializing
[    0.033160] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.040844] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.051506] ASID allocator initialised with 65536 entries
[    0.057132] rcu: Hierarchical SRCU implementation.
[    0.062918] EFI services will not be available.
[    0.068012] smp: Bringing up secondary CPUs ...
[    0.075941] smp: Brought up 1 node, 4 CPUs
[    0.083635] devtmpfs: initialized
[    0.117833] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.127660] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.144508] pinctrl core: initialized pinctrl subsystem
[    0.151199] NET: Registered protocol family 16
[    0.177761] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.185373] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.193561] audit: initializing netlink subsys (disabled)
[    0.199361] audit: type=2000 audit(0.132:1): state=initialized audit_enabled=0 res=1
[    0.200044] thermal_sys: Registered thermal governor 'step_wise'
[    0.207669] cpuidle: using governor ladder
[    0.217883] cpuidle: using governor menu
[    0.349627] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.356430] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.439571] raid6: int64x8  gen()   763 MB/s
[    0.512210] raid6: int64x8  xor()   431 MB/s
[    0.584831] raid6: int64x4  gen()   892 MB/s
[    0.657421] raid6: int64x4  xor()   551 MB/s
[    0.730009] raid6: int64x2  gen()  1031 MB/s
[    0.802593] raid6: int64x2  xor()   536 MB/s
[    0.875173] raid6: int64x1  gen()   833 MB/s
[    0.947804] raid6: int64x1  xor()   419 MB/s
[    0.952178] raid6: using algorithm int64x2 gen() 1031 MB/s
[    0.957710] raid6: .... xor() 536 MB/s, rmw enabled
[    0.962619] raid6: using intx1 recovery algorithm
[    0.969144] vgaarb: loaded
[    0.972398] SCSI subsystem initialized
[    0.976531] usbcore: registered new interface driver usbfs
[    0.982140] usbcore: registered new interface driver hub
[    0.987551] usbcore: registered new device driver usb
[    0.993293] mc: Linux media interface: v0.10
[    0.997677] videodev: Linux video capture interface: v2.00
[    1.003992] Advanced Linux Sound Architecture Driver Initialized.
[    1.011030] Bluetooth: Core ver 2.22
[    1.014703] NET: Registered protocol family 31
[    1.019183] Bluetooth: HCI device and connection manager initialized
[    1.025569] Bluetooth: HCI socket layer initialized
[    1.030485] Bluetooth: L2CAP socket layer initialized
[    1.035581] Bluetooth: SCO socket layer initialized
[    1.041221] clocksource: Switched to clocksource riscv_clocksource
[    1.968977] NET: Registered protocol family 2
[    1.974111] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    1.994787] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    2.003656] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    2.012512] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    2.020829] TCP: Hash tables configured (established 131072 bind 65536)
[    2.027782] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    2.034749] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    2.042312] NET: Registered protocol family 1
[    2.047745] RPC: Registered named UNIX socket transport module.
[    2.053756] RPC: Registered udp transport module.
[    2.058529] RPC: Registered tcp transport module.
[    2.063286] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.070618] PCI: CLS 0 bytes, default 64
[    2.076043] khv_probe, 164, irq: 64.
[    2.081464] Initialise system trusted keyrings
[    2.086378] workingset: timestamp_bits=46 max_order=22 bucket_order=0
[    2.110177] NFS: Registering the id_resolver key type
[    2.115317] Key type id_resolver registered
[    2.119538] Key type id_legacy registered
[    2.123794] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    2.130573] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    2.138040] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    2.144939] fuse: init (API version 7.32)
[    2.149813] 9p: Installing v9fs 9p2000 file system support
[    2.239085] NET: Registered protocol family 38
[    2.243661] xor: measuring software checksum speed
[    2.252907]    8regs           :  2258 MB/sec
[    2.261686]    8regs_prefetch  :  2266 MB/sec
[    2.270858]    32regs          :  2068 MB/sec
[    2.280016]    32regs_prefetch :  2072 MB/sec
[    2.284396] xor: using function: 8regs_prefetch (2266 MB/sec)
[    2.290165] Key type asymmetric registered
[    2.294284] Asymmetric key parser 'x509' registered
[    2.299259] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    2.306974] io scheduler mq-deadline registered
[    2.311606] io scheduler kyber registered
[    2.317689] light-pinctrl ffe7f3c000.pinctrl1-apsys: initialized light pinctrl driver
[    2.326051] light-pinctrl ffec007000.padctrl0-apsys: initialized light pinctrl driver
[    2.334348] light-pinctrl fffff4a000.padctrl-aosys: initialized light pinctrl driver
[    2.342517] light-pinctrl ffcb01d000.padctrl-audiosys: initialized light pinctrl driver
[    2.358302] pwm-backlight pwm-backlight@0: supply power not found, using dummy regulator
[    2.381048] light-fm-clk ffef010000.clock-controller: succeed to register light fullmask clock driver
[    2.398048] visys-clk-gate-provider soc:visys-clk-gate: succeed to register visys gate clock provider
[    2.410681] vpsys-clk-gate-provider ffecc30000.vpsys-clk-gate: succeed to register vpsys gate clock provider
[    2.428651] vosys-clk-gate-provider ffef528000.vosys-clk-gate: succeed to register vosys gate clock provider
[    2.439190] dspsys-clk-gate-provider soc:dspsys-clk-gate: cannot find regmap for tee dsp system register
[    2.452230] dspsys-clk-gate-provider soc:dspsys-clk-gate: succeed to register dspsys gate clock provider
[    2.462419] light_audiosys_clk_probe audiosys_regmap=0xffffffe100aabc00
[    2.476120] audiosys-clk-gate-provider soc:audiosys-clk-gate: succeed to register audiosys gate clock provider
[    2.487247] dw_axi_dmac_platform ffefc00000.dmac: DesignWare AXI DMA Controller, 4 channels
[    2.497847] dw_axi_dmac_platform ffc8000000.audio_dmac: DesignWare AXI DMA Controller, 16 channels
[    2.508991] (NULL device *): failed to find vdmabuf_reserved_memory node
[    2.515797] virtio-vdmabuf: carveout bufs setup failed -22
[    2.627587] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[    2.638007] printk: console [ttyS0] disabled
[    2.642437] ffe7014000.serial: ttyS0 at MMIO 0xffe7014000 (irq = 4, base_baud = 6250000) is a 16550A
[    2.651693] printk: console [ttyS0] enabled
[    2.651693] printk: console [ttyS0] enabled
[    2.660138] printk: bootconsole [uart0] disabled
[    2.660138] printk: bootconsole [uart0] disabled
[    2.671241] ffe7f00000.serial: ttyS1 at MMIO 0xffe7f00000 (irq = 6, base_baud = 6250000) is a 16550A
[    2.682191] fff7f08000.serial: ttyS4 at MMIO 0xfff7f08000 (irq = 8, base_baud = 6250000) is a 16550A
[    2.700808] vs-dc ffef600000.dc8200: dpu0pll_on:0 dpu1pll_on:1
[    2.711037] vs-drm display-subsystem: bound ffef600000.dc8200 (ops 0xffffffe000ec5f90)
[    2.719265] dwhdmi-light ffef540000.dw-hdmi-tx: Detected HDMI TX controller v2.14a with HDCP (DWC HDMI 2.0 TX PHY)
[    2.730560] dwhdmi-light ffef540000.dw-hdmi-tx: registered DesignWare HDMI I2C bus driver
[    2.739182] vs-drm display-subsystem: bound ffef540000.dw-hdmi-tx (ops 0xffffffe000ec7758)
[    2.748898] [drm] Initialized vs-drm 1.0.0 20191101 for display-subsystem on minor 0
[    2.880225] Console: switching to colour frame buffer device 175x65
[    2.903165] vs-drm display-subsystem: [drm] fb0: vs-drmdrmfb frame buffer device
[    2.925519] loop: module loaded
[    2.931704] spi_norflash@0 enforce active low on chipselect handle
[    2.939225] spi-nor spi0.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff
[    2.946227] dw_spi_mmio ffe700c000.spi: cs1 >= max 1
[    2.951249] spi_master spi0: spi_device register error /soc/spi@ffe700c000/spidev@1
[    2.958956] spi_master spi0: Failed to create SPI device for /soc/spi@ffe700c000/spidev@1
[    2.967725] spidev@0 enforce active low on chipselect handle
[    2.977969] tun: Universal TUN/TAP device driver, 1.6
[    2.986092] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.992349] ohci-pci: OHCI PCI platform driver
[    2.998057] usbcore: registered new interface driver usb-storage
[    3.004156] usbcore: registered new interface driver ums-sddr09
[    3.010159] usbcore: registered new interface driver ums-sddr55
[    3.016511] mousedev: PS/2 mouse device common for all mice
[    3.023278] xgene-rtc fffff40000.rtc: registered as rtc0
[    3.028750] xgene-rtc fffff40000.rtc: setting system clock to 1970-01-01T00:00:00 UTC (0)
[    3.037456] i2c /dev entries driver
[    3.043070] hwmon hwmon0: temp2_input not attached to any thermal zone
[    3.050748] light_reset_deassert id:0
[    3.054479] dw_wdt ffefc30000.watchdog: No valid TOPs array specified
[    3.061710] light_reset_deassert id:1
[    3.065432] dw_wdt ffefc31000.watchdog: No valid TOPs array specified
[    3.073379] Watchdog module: light-wdt loaded
[    3.078321] device-mapper: ioctl: 4.44.0-ioctl (2021-02-01) initialised: dm-devel@redhat.com
[    3.087404] Bluetooth: HCI UART driver ver 2.2.0c90be4.20211102-175223
[    3.093986] Bluetooth: HCI H4 protocol initialized
[    3.098816] Bluetooth: HCI Realtek H5 protocol initialized
[    3.104331] rtk_btcoex: rtk_btcoex_init: version: 1.2
[    3.109408] rtk_btcoex: create workqueue
[    3.113611] rtk_btcoex: alloc buffers 1792, 2432 for ev and l2
[    3.121764] sdhci: Secure Digital Host Controller Interface driver
[    3.127989] sdhci: Copyright(c) Pierre Ossman
[    3.132375] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.141948] usbcore: registered new interface driver usbhid
[    3.147585] usbhid: USB HID core driver
[    3.152499] misc vhost-vdmabuf: failed to find vdmabuf_reserved_memory node
[    3.159520] misc vhost-vdmabuf: vhost-vdmabuf: carveout bufs setup failed -22
[    3.166694] misc vhost-vdmabuf: vhost-vdmabuf: init successfully
[    3.168665] mmc0: SDHCI controller on ffe7080000.sdhci [ffe7080000.sdhci] using ADMA 64-bit
[    3.174608] thead,light-mbox-client mbox_910t_client2: Successfully registered
[    3.176688] mmc1: SDHCI controller on ffe7090000.sd [ffe7090000.sd] using ADMA 64-bit
[    3.197564] light-adc fffff51000.adc: Thead light adc registered.
[    3.205383] [perf] T-HEAD C900 PMU v1 probed
[    3.210628] light_efuse ffff210000.efuse: succeed to register light efuse driver
[    3.227634] IPVS: Registered protocols (TCP, UDP)
[    3.232553] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[    3.236028] mmc0: new HS400 MMC card at address 0001
[    3.240137] IPVS: ipvs loaded.
[    3.246050] mmcblk0: mmc0:0001 Y2P128 116 GiB
[    3.248091] IPVS: [rr] scheduler registered.
[    3.252888] mmcblk0boot0: mmc0:0001 Y2P128 partition 1 4.00 MiB
[    3.257046] IPv4 over IPsec tunneling driver
[    3.263172] mmcblk0boot1: mmc0:0001 Y2P128 partition 2 4.00 MiB
[    3.265319] mmc2: SDHCI controller on ffe70a0000.sd [ffe70a0000.sd] using ADMA 64-bit
[    3.268100] Initializing XFRM netlink socket
[    3.270753] sdhci-dwcmshc ffe70a0000.sd: card claims to support voltages below defined range
[    3.273413] mmcblk0rpmb: mmc0:0001 Y2P128 partition 3 16.0 MiB, chardev (245:0)
[    3.282313] NET: Registered protocol family 10
[    3.282843] random: fast init done
[    3.284914] mmc2: new high speed SDIO card at address 0001
[    3.291813]  mmcblk0: p1 p2 p3
[    3.296181] Segment Routing with IPv6
[    3.322557] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    3.330830] NET: Registered protocol family 17
[    3.335744] Bridge firewalling registered
[    3.340304] Bluetooth: RFCOMM TTY layer initialized
[    3.345356] Bluetooth: RFCOMM socket layer initialized
[    3.350696] Bluetooth: RFCOMM ver 1.11
[    3.354644] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.360106] Bluetooth: BNEP socket layer initialized
[    3.365141] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    3.371199] Bluetooth: HIDP socket layer initialized
[    3.376370] 8021q: 802.1Q VLAN Support v1.8
[    3.380729] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    3.386709] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    3.391581] [WLAN_RFKILL]: can't find rockchip,grf property
[    3.397249] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = rtl8723ds
[    3.404561] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power will enabled while kernel starting and keep on.
[    3.414605] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    3.422270] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[    3.429756] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    3.435096] [WLAN_RFKILL]: rockchip_wifi_power: 1
[    3.439874] [BT_RFKILL]: rfkill_get_bt_power_state: rfkill-bt driver has not Successful initialized
[    3.449005] [WLAN_RFKILL]: wifi turn on power. -1
[    3.453776] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    3.458834] [BT_RFKILL]: Enter rfkill_rk_init
[    3.464098] [BT_RFKILL]: bluetooth_platdata_parse_dt: uart_rts_gpios is no-in-use.
[    3.471877] [BT_RFKILL]: bluetooth_platdata_parse_dt: clk_get failed!!!.
[    3.479081] [BT_RFKILL]: bt_default device registered.
[    3.484969] 9pnet: Installing 9P2000 support
[    3.489504] Key type dns_resolver registered
[    3.494438] NET: Registered protocol family 40
[    3.499718] registered taskstats version 1
[    3.503902] Loading compiled-in X.509 certificates
[    3.513527] Btrfs loaded, crc32c=crc32c-generic
[    3.518320]
[    3.519829] ********************************************************************
[    3.527321] **     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE           **
[    3.534772] **                                                                **
[    3.542204] **  WRITEABLE clk DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL **
[    3.549644] **                                                                **
[    3.557064] ** This means that this kernel is built to expose clk operations  **
[    3.564499] ** such as parent or rate setting, enabling, disabling, etc.      **
[    3.571955] ** to userspace, which may compromise security on your system.    **
[    3.579393] **                                                                **
[    3.586824] ** If you see this message and you are not debugging the          **
[    3.594247] ** kernel, report this immediately to your vendor!                **
[    3.601680] **                                                                **
[    3.609120] **     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE           **
[    3.616549] ********************************************************************
[    3.706929] pca953x 0-0018: supply vcc not found, using dummy regulator
[    3.713859] pca953x 0-0018: using no AI
[    3.724359] pca953x 1-0018: supply vcc not found, using dummy regulator
[    3.731373] pca953x 1-0018: using no AI
[    3.740224] pca953x 3-0018: supply vcc not found, using dummy regulator
[    3.747249] pca953x 3-0018: using no AI
[    3.758499] pwm-light ffec01c000.pwm: succeed to add a pwm chip
[    3.764819] pwm-backlight pwm-backlight@0: supply power not found, using dummy regulator
[    3.774358] light_dwmac_eth ffe7070000.ethernet: IRQ eth_wake_irq not found
[    3.781434] light_dwmac_eth ffe7070000.ethernet: IRQ eth_lpi not found
[    3.788180] light_dwmac_eth ffe7070000.ethernet: Cannot get CSR clock
[    3.794705] light_dwmac_eth ffe7070000.ethernet: PTP uses main clock
[    3.801118] light_dwmac_eth ffe7070000.ethernet: no reset control found
[    3.807795] light_dwmac_eth ffe7070000.ethernet: id: 0
[    3.812983] light_dwmac_eth ffe7070000.ethernet: phy interface: 9
[    3.819226] RX clk delay: 0x0
[    3.822240] TX clk delay: 0x0
[    3.825866] light_dwmac_eth ffe7070000.ethernet: User ID: 0x10, Synopsys ID: 0x37
[    3.833422] light_dwmac_eth ffe7070000.ethernet:     DWMAC1000
[    3.839047] light_dwmac_eth ffe7070000.ethernet: DMA HW capability register supported
[    3.846933] light_dwmac_eth ffe7070000.ethernet: RX Checksum Offload Engine supported
[    3.854880] light_dwmac_eth ffe7070000.ethernet: COE Type 2
[    3.860495] light_dwmac_eth ffe7070000.ethernet: TX Checksum insertion supported
[    3.867940] light_dwmac_eth ffe7070000.ethernet: Enhanced/Alternate descriptors
[    3.875300] light_dwmac_eth ffe7070000.ethernet: Enabled extended descriptors
[    3.882490] light_dwmac_eth ffe7070000.ethernet: Ring mode enabled
[    3.888701] light_dwmac_eth ffe7070000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    3.897154] light_dwmac_eth ffe7070000.ethernet: Using 0 bits DMA width,skb alloc dma32 flag 4
[    3.914482] light_dwmac_eth ffe7060000.ethernet: IRQ eth_wake_irq not found
[    3.921539] light_dwmac_eth ffe7060000.ethernet: IRQ eth_lpi not found
[    3.928293] light_dwmac_eth ffe7060000.ethernet: Cannot get CSR clock
[    3.934808] light_dwmac_eth ffe7060000.ethernet: PTP uses main clock
[    3.941297] light_dwmac_eth ffe7060000.ethernet: no reset control found
[    3.947973] light_dwmac_eth ffe7060000.ethernet: id: 1
[    3.953180] light_dwmac_eth ffe7060000.ethernet: phy interface: 9
[    3.959407] RX clk delay: 0x0
[    3.962434] TX clk delay: 0x0
[    3.965954] light_dwmac_eth ffe7060000.ethernet: User ID: 0x10, Synopsys ID: 0x37
[    3.973517] light_dwmac_eth ffe7060000.ethernet:     DWMAC1000
[    3.979125] light_dwmac_eth ffe7060000.ethernet: DMA HW capability register supported
[    3.986998] light_dwmac_eth ffe7060000.ethernet: RX Checksum Offload Engine supported
[    3.994870] light_dwmac_eth ffe7060000.ethernet: COE Type 2
[    4.000489] light_dwmac_eth ffe7060000.ethernet: TX Checksum insertion supported
[    4.007919] light_dwmac_eth ffe7060000.ethernet: Enhanced/Alternate descriptors
[    4.015259] light_dwmac_eth ffe7060000.ethernet: Enabled extended descriptors
[    4.022430] light_dwmac_eth ffe7060000.ethernet: Ring mode enabled
[    4.028657] light_dwmac_eth ffe7060000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    4.037091] light_dwmac_eth ffe7060000.ethernet: Using 0 bits DMA width,skb alloc dma32 flag 4
[    4.096605] succeed to create power domain debugfs direntry
[    4.105104] soc_vdd_3v3_en GPIO handle specifies active low - ignored
[    4.112731] soc_lcd0_vdd33_en GPIO handle specifies active low - ignored
[    4.121318] soc_lcd0_vdd18_en GPIO handle specifies active low - ignored
[    4.129777] soc_vdd5v_se_en GPIO handle specifies active low - ignored
[    4.137156] soc_wcn33_en GPIO handle specifies active low - ignored
[    4.144282] soc_vbus_en GPIO handle specifies active low - ignored
[    4.151436] soc_avdd28_rgb GPIO handle specifies active low - ignored
[    4.160036] soc_dovdd18_rgb GPIO handle specifies active low - ignored
[    4.168330] soc_dvdd12_rgb GPIO handle specifies active low - ignored
[    4.176502] soc_avdd25_ir GPIO handle specifies active low - ignored
[    4.184344] soc_dovdd18_ir GPIO handle specifies active low - ignored
[    4.192221] soc_dvdd12_ir GPIO handle specifies active low - ignored
[    4.200070] soc_cam2_avdd25_ir GPIO handle specifies active low - ignored
[    4.208270] soc_cam2_dovdd18_ir GPIO handle specifies active low - ignored
[    4.216579] soc_cam2_dvdd12_ir GPIO handle specifies active low - ignored
[    4.255702] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 750000 KHz, changing to: 800000 KHz
[    4.266826] cpu cpu0: finish to register cpufreq driver
[    4.272906] thead,light-aon-test aon:light-aon-test: Successfully registered
[    4.282109] regulator-pwr-en GPIO handle specifies active low - ignored
[    4.290092] regulator-hub-vdd12-en GPIO handle specifies active low - ignored
[    4.298084] regulator-hub-vcc5v-en GPIO handle specifies active low - ignored
[    4.311040] light-event soc:light-event: failed to set aon reservemem
[    4.317565] light-event soc:light-event: set aon reservemem failed!
[    4.323977] light-event: probe of soc:light-event failed with error -1
[    4.332837] [light_wdt_probe,329] register power off callback
[    4.338673] succeed to register light pmic watchdog
[    4.390105] alloc_contig_range: [3e4280, 3e4300) PFNs busy
[    4.400642] alloc_contig_range: [3e4280, 3e4300) PFNs busy
[    4.406619] alloc_contig_range: [3e4300, 3e4380) PFNs busy
[    4.416202] debugfs: File 'ES8156 SDOUT' in directory 'dapm' already present!
[    4.426868] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    4.434565] light rpmsg: Ready for cross core communication!
[    4.440318] light rpmsg: rproc_name = m4
[    4.441045] alloc_contig_range: [3e4400, 3e4600) PFNs busy
[    4.451053] alloc_contig_range: [3e4500, 3e4700) PFNs busy
[    4.457112] alloc_contig_range: [3e4600, 3e4800) PFNs busy
[    4.463129] alloc_contig_range: [3e4700, 3e4900) PFNs busy
[    4.497631] virtio_rpmsg_bus virtio0: creating channel rpmsg-virtual-char-channel-1 addr 0xee
[    4.981725] virtio_rpmsg_bus virtio0: rpmsg host is online
[    4.988240] light rpmsg: driver is registered.
[    4.993347] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.009529] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.016429] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    5.017239] clk: Not disabling unused clocks
[    5.025081] cfg80211: failed to load regulatory.db
[    5.029394] ALSA device list:
[    5.037162]   #0: Light-Sound-Card
[    5.041046] dw-apb-uart ffe7014000.serial: forbid DMA for kernel console
[    5.056084] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended
[    5.066071] EXT4-fs (mmcblk0p3): recovery complete
[    5.070940] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[    5.079174] VFS: Mounted root (ext4 filesystem) on device 179:3.
[    5.087072] devtmpfs: mounted
[    5.090187] Freeing unused kernel memory: 328K
[    5.095233] Run /sbin/init as init process
[    5.110009] EXT4-fs warning (device mmcblk0p3): ext4_dirblock_csum_verify:379: inode #1369: comm swapper/0: No space for directory leaf checksum. Please run e2fsck -D.
[    5.125030] EXT4-fs error (device mmcblk0p3): ext4_dx_find_entry:1726: inode #1369: block 23: comm swapper/0: Directory block failed checksum
[    5.138576] Starting init: /sbin/init exists but couldn't execute it (error -74)
[    5.146082] Run /etc/init as init process
[    5.152064] Run /bin/init as init process
[    5.157035] Run /bin/sh as init process
[    5.163136] EXT4-fs warning (device mmcblk0p3): ext4_dirblock_csum_verify:379: inode #1369: comm swapper/0: No space for directory leaf checksum. Please run e2fsck -D.
[    5.178123] EXT4-fs error (device mmcblk0p3): ext4_dx_find_entry:1726: inode #1369: block 23: comm swapper/0: Directory block failed checksum
[    5.191621] Starting init: /bin/sh exists but couldn't execute it (error -74)
[    5.198842] Kernel panic - not syncing: No working init found.  Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance.
[    5.213011] SMP: stopping secondary CPUs
[    5.216952] enter panic_cpufreq_notifier_call
[    5.221453] finish to execute cpufreq notifier callback on panic
[    5.227534] ---[ end Kernel panic - not syncing: No working init found.  Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance. ]---

AKeen12344 commented 1 year ago

@vladimir-dudnik-1 I've tried official images from 20231023, basic and full. Was able to burn and boot into basic image, everything work as expected. But got issue trying to boot full image, error reported in debug console: [ 5.198842] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance.

Could anyone help to solve this issue?

complete log is below:

brom_ver 8
[APP][E] protocol_connect failed, exit.
-------------------------------------------------------
  _____             _    _____ _                     _
 |  __ \           (_)  / ____(_)                   | |
 | |__) _   _ _   _ _  | (___  _ _ __   ___  ___  __| |
 |  _  | | | | | | | |  \___ \| | '_ \ / _ \/ _ \/ _` |
 | | \ | |_| | |_| | |  ____) | | |_) |  __|  __| (_| |
 |_|  \_\__,_|\__, |_| |_____/|_| .__/ \___|\___|\__,_|
               __/ |            | |
              |___/             |_|
                       -- Presented by ISCAS and Sipeed
-------------------------------------------------------

U-Boot SPL 2020.01-ga50d8b9d (Oct 13 2023 - 02:45:18 +0000)
FM[1] lpddr4x dualrank freq=3733 64bit dbi_off=n sdram init
ddr initialized, jump to uboot
image has no header

U-Boot 2020.01-ga50d8b9d (Oct 13 2023 - 02:45:18 +0000)

CPU:   rv64imafdcvsu
Model: T-HEAD c910 light
DRAM:  16 GiB
C910 CPU FREQ: 750MHz
AHB2_CPUSYS_HCLK FREQ: 250MHz
AHB3_CPUSYS_PCLK FREQ: 125MHz
PERISYS_AHB_HCLK FREQ: 250MHz
PERISYS_APB_PCLK FREQ: 62MHz
GMAC PLL POSTDIV FREQ: 1000MHZ
DPU0 PLL POSTDIV FREQ: 1188MHZ
DPU1 PLL POSTDIV FREQ: 1188MHZ
MMC:   sdhci@ffe7080000: 0, sd@ffe7090000: 1
Loading Environment from MMC... OK
Error reading output register
Warning: cannot get lcd-en GPIO
LCD panel cannot be found : -121
splash screen startup cost 16 ms
In:    serial
Out:   serial
Err:   serial
Net:   ethernet@ffe7070000 (eth0) using MAC address - 48:da:35:60:00:09
eth0: ethernet@ffe7070000ethernet@ffe7070000:0 is connected to ethernet@ffe7070000.  Reconnecting to ethernet@ffe7060000
ethernet@ffe7060000 (eth1) using MAC address - 48:da:35:60:00:0a
, eth1: ethernet@ffe7060000
Hit any key to stop autoboot:  0
## Error: "findpart" not defined
50340 bytes read in 1 ms (48 MiB/s)
6117904 bytes read in 19 ms (307.1 MiB/s)
86040 bytes read in 2 ms (41 MiB/s)
Retrieving file: /extlinux/extlinux.conf
1136 bytes read in 1 ms (1.1 MiB/s)
U-Boot menu
1:      RevyOS GNU/Linux 5.10.113-lpi4a (HDMI only)
2:      RevyOS GNU/Linux 5.10.113-lpi4a (HDMI and MIPI)
3:      RevyOS GNU/Linux 5.10.113-lpi4a (rescue target)
Enter choice: 1
1:      RevyOS GNU/Linux 5.10.113-lpi4a (HDMI only)
Retrieving file: /Image
23152640 bytes read in 72 ms (306.7 MiB/s)
append: root=/dev/mmcblk0p3 console=ttyS0,115200 rootwait rw earlycon clk_ignore_unused loglevel=7 eth= rootrwoptions=rw,noatime rootrwreset=yes
Retrieving file: /dtbs/linux-image-5.10.113-lpi4a/thead/light-lpi4a-16gb.dtb
78164 bytes read in 2 ms (37.3 MiB/s)
## Flattened Device Tree blob at 02800000
   Booting using the fdt blob at 0x2800000
   Using Device Tree in place at 0000000002800000, end 0000000002816153

Starting kernel ...

OpenSBI v0.9
   ____                    _____ ____ _____
  / __ \                  / ____|  _ \_   _|
 | |  | |_ __   ___ _ __ | (___ | |_) || |
 | |  | | '_ \ / _ \ '_ \ \___ \|  _ < | |
 | |__| | |_) |  __/ | | |____) | |_) || |_
  \____/| .__/ \___|_| |_|_____/|____/_____|
        | |
        |_|

Platform Name             : Sipeed Lichee Pi 4A configuration for 16GB DDR board
Platform Features         : mfdeleg
Platform HART Count       : 4
Platform IPI Device       : clint
Platform Timer Device     : clint
Platform Console Device   : uart8250
Platform HSM Device       : ---
Platform SysReset Device  : thead_reset
Firmware Base             : 0x0
Firmware Size             : 136 KB
Runtime SBI Version       : 0.3

Domain0 Name              : root
Domain0 Boot HART         : 0
Domain0 HARTs             : 0*,1*,2*,3*
Domain0 Region00          : 0x000000ffdc000000-0x000000ffdc00ffff (I)
Domain0 Region01          : 0x0000000000000000-0x000000000003ffff ()
Domain0 Region02          : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address      : 0x0000000000200000
Domain0 Next Arg1         : 0x0000000002800000
Domain0 Next Mode         : S-mode
Domain0 SysReset          : yes

Boot HART ID              : 0
Boot HART Domain          : root
Boot HART ISA             : rv64imafdcvsux
Boot HART Features        : scounteren,mcounteren,time
Boot HART PMP Count       : 0
Boot HART PMP Granularity : 0
Boot HART PMP Address Bits: 0
Boot HART MHPM Count      : 16
Boot HART MHPM Count      : 16
Boot HART MIDELEG         : 0x0000000000000222
Boot HART MEDELEG         : 0x000000000000b109
[    0.000000] Linux version 5.10.113+ (ubuntu@ubuntu-2204-buildserver) (riscv64-unknown-linux-gnu-gcc (Xuantie-900 linux-5.10.4 glibc gcc Toolchain V2.6.1 B-20220906) 10.2.0, GNU ld (GNU Binutils) 2.35) #4 SMP PREEMPT Fri Oct 20 06:59:14 UTC 2023
[    0.000000] earlycon: uart0 at MMIO32 0x000000ffe7014000 (options '115200n8')
[    0.000000] printk: bootconsole [uart0] enabled
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x00000003e4000000, size 320 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000200000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000003ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x000000000fffffff]
[    0.000000]   node   0: [mem 0x0000000010000000-0x00000000166fffff]
[    0.000000]   node   0: [mem 0x0000000016700000-0x0000000016ffffff]
[    0.000000]   node   0: [mem 0x0000000017000000-0x0000000018ffffff]
[    0.000000]   node   0: [mem 0x0000000019000000-0x000000001bffffff]
[    0.000000]   node   0: [mem 0x000000001c000000-0x000000001e00ffff]
[    0.000000]   node   0: [mem 0x000000001e010000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020000000-0x00000000207fffff]
[    0.000000]   node   0: [mem 0x0000000020800000-0x0000000031ffffff]
[    0.000000]   node   0: [mem 0x0000000032000000-0x00000000383fffff]
[    0.000000]   node   0: [mem 0x0000000038400000-0x00000003ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000003ffffffff]
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] SBI specification v0.3 detected
[    0.000000] SBI implementation ID=0x1 Version=0x9
[    0.000000] SBI v0.2 TIME extension detected
[    0.000000] SBI v0.2 IPI extension detected
[    0.000000] SBI v0.2 RFENCE extension detected
[    0.000000] SBI v0.2 HSM extension detected
[    0.000000] riscv: ISA extensions acdfimsuv
[    0.000000] riscv: ELF capabilities acdfimv
[    0.000000] percpu: Embedded 27 pages/cpu s73560 r8192 d28840 u110592
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4128264
[    0.000000] Kernel command line: root=/dev/mmcblk0p3 console=ttyS0,115200 rootwait rw earlycon clk_ignore_unused loglevel=7 eth= rootrwoptions=rw,noatime rootrwreset=yes
[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Sorting __ex_table...
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 15788944K/16775168K available (12099K kernel code, 4236K rwdata, 4096K rodata, 331K init, 512K bss, 658544K reserved, 327680K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] riscv-intc: 64 local interrupts mapped
[    0.000000] plic: interrupt-controller@ffd8000000: mapped 64 interrupts with 4 handlers for 8 contexts.
[    0.000000] random: get_random_bytes called from start_kernel+0x372/0x4d4 with crng_init=0
[    0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [0]
[    0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1623fa770, max_idle_ns: 881590404476 ns
[    0.000009] sched_clock: 64 bits at 3000kHz, resolution 333ns, wraps every 4398046511097ns
[    0.008739] Console: colour dummy device 80x25
[    0.013276] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=12000)
[    0.023487] pid_max: default: 32768 minimum: 301
[    0.028334] LSM: Security Framework initializing
[    0.033160] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.040844] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.051506] ASID allocator initialised with 65536 entries
[    0.057132] rcu: Hierarchical SRCU implementation.
[    0.062918] EFI services will not be available.
[    0.068012] smp: Bringing up secondary CPUs ...
[    0.075941] smp: Brought up 1 node, 4 CPUs
[    0.083635] devtmpfs: initialized
[    0.117833] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.127660] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.144508] pinctrl core: initialized pinctrl subsystem
[    0.151199] NET: Registered protocol family 16
[    0.177761] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.185373] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.193561] audit: initializing netlink subsys (disabled)
[    0.199361] audit: type=2000 audit(0.132:1): state=initialized audit_enabled=0 res=1
[    0.200044] thermal_sys: Registered thermal governor 'step_wise'
[    0.207669] cpuidle: using governor ladder
[    0.217883] cpuidle: using governor menu
[    0.349627] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.356430] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.439571] raid6: int64x8  gen()   763 MB/s
[    0.512210] raid6: int64x8  xor()   431 MB/s
[    0.584831] raid6: int64x4  gen()   892 MB/s
[    0.657421] raid6: int64x4  xor()   551 MB/s
[    0.730009] raid6: int64x2  gen()  1031 MB/s
[    0.802593] raid6: int64x2  xor()   536 MB/s
[    0.875173] raid6: int64x1  gen()   833 MB/s
[    0.947804] raid6: int64x1  xor()   419 MB/s
[    0.952178] raid6: using algorithm int64x2 gen() 1031 MB/s
[    0.957710] raid6: .... xor() 536 MB/s, rmw enabled
[    0.962619] raid6: using intx1 recovery algorithm
[    0.969144] vgaarb: loaded
[    0.972398] SCSI subsystem initialized
[    0.976531] usbcore: registered new interface driver usbfs
[    0.982140] usbcore: registered new interface driver hub
[    0.987551] usbcore: registered new device driver usb
[    0.993293] mc: Linux media interface: v0.10
[    0.997677] videodev: Linux video capture interface: v2.00
[    1.003992] Advanced Linux Sound Architecture Driver Initialized.
[    1.011030] Bluetooth: Core ver 2.22
[    1.014703] NET: Registered protocol family 31
[    1.019183] Bluetooth: HCI device and connection manager initialized
[    1.025569] Bluetooth: HCI socket layer initialized
[    1.030485] Bluetooth: L2CAP socket layer initialized
[    1.035581] Bluetooth: SCO socket layer initialized
[    1.041221] clocksource: Switched to clocksource riscv_clocksource
[    1.968977] NET: Registered protocol family 2
[    1.974111] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    1.994787] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    2.003656] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    2.012512] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    2.020829] TCP: Hash tables configured (established 131072 bind 65536)
[    2.027782] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    2.034749] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    2.042312] NET: Registered protocol family 1
[    2.047745] RPC: Registered named UNIX socket transport module.
[    2.053756] RPC: Registered udp transport module.
[    2.058529] RPC: Registered tcp transport module.
[    2.063286] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.070618] PCI: CLS 0 bytes, default 64
[    2.076043] khv_probe, 164, irq: 64.
[    2.081464] Initialise system trusted keyrings
[    2.086378] workingset: timestamp_bits=46 max_order=22 bucket_order=0
[    2.110177] NFS: Registering the id_resolver key type
[    2.115317] Key type id_resolver registered
[    2.119538] Key type id_legacy registered
[    2.123794] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    2.130573] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    2.138040] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    2.144939] fuse: init (API version 7.32)
[    2.149813] 9p: Installing v9fs 9p2000 file system support
[    2.239085] NET: Registered protocol family 38
[    2.243661] xor: measuring software checksum speed
[    2.252907]    8regs           :  2258 MB/sec
[    2.261686]    8regs_prefetch  :  2266 MB/sec
[    2.270858]    32regs          :  2068 MB/sec
[    2.280016]    32regs_prefetch :  2072 MB/sec
[    2.284396] xor: using function: 8regs_prefetch (2266 MB/sec)
[    2.290165] Key type asymmetric registered
[    2.294284] Asymmetric key parser 'x509' registered
[    2.299259] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    2.306974] io scheduler mq-deadline registered
[    2.311606] io scheduler kyber registered
[    2.317689] light-pinctrl ffe7f3c000.pinctrl1-apsys: initialized light pinctrl driver
[    2.326051] light-pinctrl ffec007000.padctrl0-apsys: initialized light pinctrl driver
[    2.334348] light-pinctrl fffff4a000.padctrl-aosys: initialized light pinctrl driver
[    2.342517] light-pinctrl ffcb01d000.padctrl-audiosys: initialized light pinctrl driver
[    2.358302] pwm-backlight pwm-backlight@0: supply power not found, using dummy regulator
[    2.381048] light-fm-clk ffef010000.clock-controller: succeed to register light fullmask clock driver
[    2.398048] visys-clk-gate-provider soc:visys-clk-gate: succeed to register visys gate clock provider
[    2.410681] vpsys-clk-gate-provider ffecc30000.vpsys-clk-gate: succeed to register vpsys gate clock provider
[    2.428651] vosys-clk-gate-provider ffef528000.vosys-clk-gate: succeed to register vosys gate clock provider
[    2.439190] dspsys-clk-gate-provider soc:dspsys-clk-gate: cannot find regmap for tee dsp system register
[    2.452230] dspsys-clk-gate-provider soc:dspsys-clk-gate: succeed to register dspsys gate clock provider
[    2.462419] light_audiosys_clk_probe audiosys_regmap=0xffffffe100aabc00
[    2.476120] audiosys-clk-gate-provider soc:audiosys-clk-gate: succeed to register audiosys gate clock provider
[    2.487247] dw_axi_dmac_platform ffefc00000.dmac: DesignWare AXI DMA Controller, 4 channels
[    2.497847] dw_axi_dmac_platform ffc8000000.audio_dmac: DesignWare AXI DMA Controller, 16 channels
[    2.508991] (NULL device *): failed to find vdmabuf_reserved_memory node
[    2.515797] virtio-vdmabuf: carveout bufs setup failed -22
[    2.627587] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[    2.638007] printk: console [ttyS0] disabled
[    2.642437] ffe7014000.serial: ttyS0 at MMIO 0xffe7014000 (irq = 4, base_baud = 6250000) is a 16550A
[    2.651693] printk: console [ttyS0] enabled
[    2.651693] printk: console [ttyS0] enabled
[    2.660138] printk: bootconsole [uart0] disabled
[    2.660138] printk: bootconsole [uart0] disabled
[    2.671241] ffe7f00000.serial: ttyS1 at MMIO 0xffe7f00000 (irq = 6, base_baud = 6250000) is a 16550A
[    2.682191] fff7f08000.serial: ttyS4 at MMIO 0xfff7f08000 (irq = 8, base_baud = 6250000) is a 16550A
[    2.700808] vs-dc ffef600000.dc8200: dpu0pll_on:0 dpu1pll_on:1
[    2.711037] vs-drm display-subsystem: bound ffef600000.dc8200 (ops 0xffffffe000ec5f90)
[    2.719265] dwhdmi-light ffef540000.dw-hdmi-tx: Detected HDMI TX controller v2.14a with HDCP (DWC HDMI 2.0 TX PHY)
[    2.730560] dwhdmi-light ffef540000.dw-hdmi-tx: registered DesignWare HDMI I2C bus driver
[    2.739182] vs-drm display-subsystem: bound ffef540000.dw-hdmi-tx (ops 0xffffffe000ec7758)
[    2.748898] [drm] Initialized vs-drm 1.0.0 20191101 for display-subsystem on minor 0
[    2.880225] Console: switching to colour frame buffer device 175x65
[    2.903165] vs-drm display-subsystem: [drm] fb0: vs-drmdrmfb frame buffer device
[    2.925519] loop: module loaded
[    2.931704] spi_norflash@0 enforce active low on chipselect handle
[    2.939225] spi-nor spi0.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff
[    2.946227] dw_spi_mmio ffe700c000.spi: cs1 >= max 1
[    2.951249] spi_master spi0: spi_device register error /soc/spi@ffe700c000/spidev@1
[    2.958956] spi_master spi0: Failed to create SPI device for /soc/spi@ffe700c000/spidev@1
[    2.967725] spidev@0 enforce active low on chipselect handle
[    2.977969] tun: Universal TUN/TAP device driver, 1.6
[    2.986092] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.992349] ohci-pci: OHCI PCI platform driver
[    2.998057] usbcore: registered new interface driver usb-storage
[    3.004156] usbcore: registered new interface driver ums-sddr09
[    3.010159] usbcore: registered new interface driver ums-sddr55
[    3.016511] mousedev: PS/2 mouse device common for all mice
[    3.023278] xgene-rtc fffff40000.rtc: registered as rtc0
[    3.028750] xgene-rtc fffff40000.rtc: setting system clock to 1970-01-01T00:00:00 UTC (0)
[    3.037456] i2c /dev entries driver
[    3.043070] hwmon hwmon0: temp2_input not attached to any thermal zone
[    3.050748] light_reset_deassert id:0
[    3.054479] dw_wdt ffefc30000.watchdog: No valid TOPs array specified
[    3.061710] light_reset_deassert id:1
[    3.065432] dw_wdt ffefc31000.watchdog: No valid TOPs array specified
[    3.073379] Watchdog module: light-wdt loaded
[    3.078321] device-mapper: ioctl: 4.44.0-ioctl (2021-02-01) initialised: dm-devel@redhat.com
[    3.087404] Bluetooth: HCI UART driver ver 2.2.0c90be4.20211102-175223
[    3.093986] Bluetooth: HCI H4 protocol initialized
[    3.098816] Bluetooth: HCI Realtek H5 protocol initialized
[    3.104331] rtk_btcoex: rtk_btcoex_init: version: 1.2
[    3.109408] rtk_btcoex: create workqueue
[    3.113611] rtk_btcoex: alloc buffers 1792, 2432 for ev and l2
[    3.121764] sdhci: Secure Digital Host Controller Interface driver
[    3.127989] sdhci: Copyright(c) Pierre Ossman
[    3.132375] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.141948] usbcore: registered new interface driver usbhid
[    3.147585] usbhid: USB HID core driver
[    3.152499] misc vhost-vdmabuf: failed to find vdmabuf_reserved_memory node
[    3.159520] misc vhost-vdmabuf: vhost-vdmabuf: carveout bufs setup failed -22
[    3.166694] misc vhost-vdmabuf: vhost-vdmabuf: init successfully
[    3.168665] mmc0: SDHCI controller on ffe7080000.sdhci [ffe7080000.sdhci] using ADMA 64-bit
[    3.174608] thead,light-mbox-client mbox_910t_client2: Successfully registered
[    3.176688] mmc1: SDHCI controller on ffe7090000.sd [ffe7090000.sd] using ADMA 64-bit
[    3.197564] light-adc fffff51000.adc: Thead light adc registered.
[    3.205383] [perf] T-HEAD C900 PMU v1 probed
[    3.210628] light_efuse ffff210000.efuse: succeed to register light efuse driver
[    3.227634] IPVS: Registered protocols (TCP, UDP)
[    3.232553] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[    3.236028] mmc0: new HS400 MMC card at address 0001
[    3.240137] IPVS: ipvs loaded.
[    3.246050] mmcblk0: mmc0:0001 Y2P128 116 GiB
[    3.248091] IPVS: [rr] scheduler registered.
[    3.252888] mmcblk0boot0: mmc0:0001 Y2P128 partition 1 4.00 MiB
[    3.257046] IPv4 over IPsec tunneling driver
[    3.263172] mmcblk0boot1: mmc0:0001 Y2P128 partition 2 4.00 MiB
[    3.265319] mmc2: SDHCI controller on ffe70a0000.sd [ffe70a0000.sd] using ADMA 64-bit
[    3.268100] Initializing XFRM netlink socket
[    3.270753] sdhci-dwcmshc ffe70a0000.sd: card claims to support voltages below defined range
[    3.273413] mmcblk0rpmb: mmc0:0001 Y2P128 partition 3 16.0 MiB, chardev (245:0)
[    3.282313] NET: Registered protocol family 10
[    3.282843] random: fast init done
[    3.284914] mmc2: new high speed SDIO card at address 0001
[    3.291813]  mmcblk0: p1 p2 p3
[    3.296181] Segment Routing with IPv6
[    3.322557] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    3.330830] NET: Registered protocol family 17
[    3.335744] Bridge firewalling registered
[    3.340304] Bluetooth: RFCOMM TTY layer initialized
[    3.345356] Bluetooth: RFCOMM socket layer initialized
[    3.350696] Bluetooth: RFCOMM ver 1.11
[    3.354644] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.360106] Bluetooth: BNEP socket layer initialized
[    3.365141] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    3.371199] Bluetooth: HIDP socket layer initialized
[    3.376370] 8021q: 802.1Q VLAN Support v1.8
[    3.380729] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    3.386709] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    3.391581] [WLAN_RFKILL]: can't find rockchip,grf property
[    3.397249] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = rtl8723ds
[    3.404561] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power will enabled while kernel starting and keep on.
[    3.414605] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    3.422270] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[    3.429756] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    3.435096] [WLAN_RFKILL]: rockchip_wifi_power: 1
[    3.439874] [BT_RFKILL]: rfkill_get_bt_power_state: rfkill-bt driver has not Successful initialized
[    3.449005] [WLAN_RFKILL]: wifi turn on power. -1
[    3.453776] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    3.458834] [BT_RFKILL]: Enter rfkill_rk_init
[    3.464098] [BT_RFKILL]: bluetooth_platdata_parse_dt: uart_rts_gpios is no-in-use.
[    3.471877] [BT_RFKILL]: bluetooth_platdata_parse_dt: clk_get failed!!!.
[    3.479081] [BT_RFKILL]: bt_default device registered.
[    3.484969] 9pnet: Installing 9P2000 support
[    3.489504] Key type dns_resolver registered
[    3.494438] NET: Registered protocol family 40
[    3.499718] registered taskstats version 1
[    3.503902] Loading compiled-in X.509 certificates
[    3.513527] Btrfs loaded, crc32c=crc32c-generic
[    3.518320]
[    3.519829] ********************************************************************
[    3.527321] **     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE           **
[    3.534772] **                                                                **
[    3.542204] **  WRITEABLE clk DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL **
[    3.549644] **                                                                **
[    3.557064] ** This means that this kernel is built to expose clk operations  **
[    3.564499] ** such as parent or rate setting, enabling, disabling, etc.      **
[    3.571955] ** to userspace, which may compromise security on your system.    **
[    3.579393] **                                                                **
[    3.586824] ** If you see this message and you are not debugging the          **
[    3.594247] ** kernel, report this immediately to your vendor!                **
[    3.601680] **                                                                **
[    3.609120] **     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE           **
[    3.616549] ********************************************************************
[    3.706929] pca953x 0-0018: supply vcc not found, using dummy regulator
[    3.713859] pca953x 0-0018: using no AI
[    3.724359] pca953x 1-0018: supply vcc not found, using dummy regulator
[    3.731373] pca953x 1-0018: using no AI
[    3.740224] pca953x 3-0018: supply vcc not found, using dummy regulator
[    3.747249] pca953x 3-0018: using no AI
[    3.758499] pwm-light ffec01c000.pwm: succeed to add a pwm chip
[    3.764819] pwm-backlight pwm-backlight@0: supply power not found, using dummy regulator
[    3.774358] light_dwmac_eth ffe7070000.ethernet: IRQ eth_wake_irq not found
[    3.781434] light_dwmac_eth ffe7070000.ethernet: IRQ eth_lpi not found
[    3.788180] light_dwmac_eth ffe7070000.ethernet: Cannot get CSR clock
[    3.794705] light_dwmac_eth ffe7070000.ethernet: PTP uses main clock
[    3.801118] light_dwmac_eth ffe7070000.ethernet: no reset control found
[    3.807795] light_dwmac_eth ffe7070000.ethernet: id: 0
[    3.812983] light_dwmac_eth ffe7070000.ethernet: phy interface: 9
[    3.819226] RX clk delay: 0x0
[    3.822240] TX clk delay: 0x0
[    3.825866] light_dwmac_eth ffe7070000.ethernet: User ID: 0x10, Synopsys ID: 0x37
[    3.833422] light_dwmac_eth ffe7070000.ethernet:     DWMAC1000
[    3.839047] light_dwmac_eth ffe7070000.ethernet: DMA HW capability register supported
[    3.846933] light_dwmac_eth ffe7070000.ethernet: RX Checksum Offload Engine supported
[    3.854880] light_dwmac_eth ffe7070000.ethernet: COE Type 2
[    3.860495] light_dwmac_eth ffe7070000.ethernet: TX Checksum insertion supported
[    3.867940] light_dwmac_eth ffe7070000.ethernet: Enhanced/Alternate descriptors
[    3.875300] light_dwmac_eth ffe7070000.ethernet: Enabled extended descriptors
[    3.882490] light_dwmac_eth ffe7070000.ethernet: Ring mode enabled
[    3.888701] light_dwmac_eth ffe7070000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    3.897154] light_dwmac_eth ffe7070000.ethernet: Using 0 bits DMA width,skb alloc dma32 flag 4
[    3.914482] light_dwmac_eth ffe7060000.ethernet: IRQ eth_wake_irq not found
[    3.921539] light_dwmac_eth ffe7060000.ethernet: IRQ eth_lpi not found
[    3.928293] light_dwmac_eth ffe7060000.ethernet: Cannot get CSR clock
[    3.934808] light_dwmac_eth ffe7060000.ethernet: PTP uses main clock
[    3.941297] light_dwmac_eth ffe7060000.ethernet: no reset control found
[    3.947973] light_dwmac_eth ffe7060000.ethernet: id: 1
[    3.953180] light_dwmac_eth ffe7060000.ethernet: phy interface: 9
[    3.959407] RX clk delay: 0x0
[    3.962434] TX clk delay: 0x0
[    3.965954] light_dwmac_eth ffe7060000.ethernet: User ID: 0x10, Synopsys ID: 0x37
[    3.973517] light_dwmac_eth ffe7060000.ethernet:     DWMAC1000
[    3.979125] light_dwmac_eth ffe7060000.ethernet: DMA HW capability register supported
[    3.986998] light_dwmac_eth ffe7060000.ethernet: RX Checksum Offload Engine supported
[    3.994870] light_dwmac_eth ffe7060000.ethernet: COE Type 2
[    4.000489] light_dwmac_eth ffe7060000.ethernet: TX Checksum insertion supported
[    4.007919] light_dwmac_eth ffe7060000.ethernet: Enhanced/Alternate descriptors
[    4.015259] light_dwmac_eth ffe7060000.ethernet: Enabled extended descriptors
[    4.022430] light_dwmac_eth ffe7060000.ethernet: Ring mode enabled
[    4.028657] light_dwmac_eth ffe7060000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    4.037091] light_dwmac_eth ffe7060000.ethernet: Using 0 bits DMA width,skb alloc dma32 flag 4
[    4.096605] succeed to create power domain debugfs direntry
[    4.105104] soc_vdd_3v3_en GPIO handle specifies active low - ignored
[    4.112731] soc_lcd0_vdd33_en GPIO handle specifies active low - ignored
[    4.121318] soc_lcd0_vdd18_en GPIO handle specifies active low - ignored
[    4.129777] soc_vdd5v_se_en GPIO handle specifies active low - ignored
[    4.137156] soc_wcn33_en GPIO handle specifies active low - ignored
[    4.144282] soc_vbus_en GPIO handle specifies active low - ignored
[    4.151436] soc_avdd28_rgb GPIO handle specifies active low - ignored
[    4.160036] soc_dovdd18_rgb GPIO handle specifies active low - ignored
[    4.168330] soc_dvdd12_rgb GPIO handle specifies active low - ignored
[    4.176502] soc_avdd25_ir GPIO handle specifies active low - ignored
[    4.184344] soc_dovdd18_ir GPIO handle specifies active low - ignored
[    4.192221] soc_dvdd12_ir GPIO handle specifies active low - ignored
[    4.200070] soc_cam2_avdd25_ir GPIO handle specifies active low - ignored
[    4.208270] soc_cam2_dovdd18_ir GPIO handle specifies active low - ignored
[    4.216579] soc_cam2_dvdd12_ir GPIO handle specifies active low - ignored
[    4.255702] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 750000 KHz, changing to: 800000 KHz
[    4.266826] cpu cpu0: finish to register cpufreq driver
[    4.272906] thead,light-aon-test aon:light-aon-test: Successfully registered
[    4.282109] regulator-pwr-en GPIO handle specifies active low - ignored
[    4.290092] regulator-hub-vdd12-en GPIO handle specifies active low - ignored
[    4.298084] regulator-hub-vcc5v-en GPIO handle specifies active low - ignored
[    4.311040] light-event soc:light-event: failed to set aon reservemem
[    4.317565] light-event soc:light-event: set aon reservemem failed!
[    4.323977] light-event: probe of soc:light-event failed with error -1
[    4.332837] [light_wdt_probe,329] register power off callback
[    4.338673] succeed to register light pmic watchdog
[    4.390105] alloc_contig_range: [3e4280, 3e4300) PFNs busy
[    4.400642] alloc_contig_range: [3e4280, 3e4300) PFNs busy
[    4.406619] alloc_contig_range: [3e4300, 3e4380) PFNs busy
[    4.416202] debugfs: File 'ES8156 SDOUT' in directory 'dapm' already present!
[    4.426868] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    4.434565] light rpmsg: Ready for cross core communication!
[    4.440318] light rpmsg: rproc_name = m4
[    4.441045] alloc_contig_range: [3e4400, 3e4600) PFNs busy
[    4.451053] alloc_contig_range: [3e4500, 3e4700) PFNs busy
[    4.457112] alloc_contig_range: [3e4600, 3e4800) PFNs busy
[    4.463129] alloc_contig_range: [3e4700, 3e4900) PFNs busy
[    4.497631] virtio_rpmsg_bus virtio0: creating channel rpmsg-virtual-char-channel-1 addr 0xee
[    4.981725] virtio_rpmsg_bus virtio0: rpmsg host is online
[    4.988240] light rpmsg: driver is registered.
[    4.993347] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.009529] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.016429] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    5.017239] clk: Not disabling unused clocks
[    5.025081] cfg80211: failed to load regulatory.db
[    5.029394] ALSA device list:
[    5.037162]   #0: Light-Sound-Card
[    5.041046] dw-apb-uart ffe7014000.serial: forbid DMA for kernel console
[    5.056084] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended
[    5.066071] EXT4-fs (mmcblk0p3): recovery complete
[    5.070940] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[    5.079174] VFS: Mounted root (ext4 filesystem) on device 179:3.
[    5.087072] devtmpfs: mounted
[    5.090187] Freeing unused kernel memory: 328K
[    5.095233] Run /sbin/init as init process
[    5.110009] EXT4-fs warning (device mmcblk0p3): ext4_dirblock_csum_verify:379: inode #1369: comm swapper/0: No space for directory leaf checksum. Please run e2fsck -D.
[    5.125030] EXT4-fs error (device mmcblk0p3): ext4_dx_find_entry:1726: inode #1369: block 23: comm swapper/0: Directory block failed checksum
[    5.138576] Starting init: /sbin/init exists but couldn't execute it (error -74)
[    5.146082] Run /etc/init as init process
[    5.152064] Run /bin/init as init process
[    5.157035] Run /bin/sh as init process
[    5.163136] EXT4-fs warning (device mmcblk0p3): ext4_dirblock_csum_verify:379: inode #1369: comm swapper/0: No space for directory leaf checksum. Please run e2fsck -D.
[    5.178123] EXT4-fs error (device mmcblk0p3): ext4_dx_find_entry:1726: inode #1369: block 23: comm swapper/0: Directory block failed checksum
[    5.191621] Starting init: /bin/sh exists but couldn't execute it (error -74)
[    5.198842] Kernel panic - not syncing: No working init found.  Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance.
[    5.213011] SMP: stopping secondary CPUs
[    5.216952] enter panic_cpufreq_notifier_call
[    5.221453] finish to execute cpufreq notifier callback on panic
[    5.227534] ---[ end Kernel panic - not syncing: No working init found.  Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance. ]---

Your flash was corrupted somehow. I've had very little luck using the full image with included fastboot binary until I reboot my computer and it just decided to flash more than a few thousand little tiny packets at a time until it froze up.

Using the new burn_tools_support_bigimage zip could solve this, though I haven't tried it. Also, giving us the console output of the flashing script would be more helpful.

vladimir-dudnik-1 commented 1 year ago

ok, thanks for info, good to know that no issues are expected in prebuilt image. I'll try reburn once again and report on results

ccpster commented 1 year ago

Hi, Which build tool used for official Sipeed image 20231023? I would like to download the source code (especially u-boot) to see how can I setup to select boot from SD card.

AKeen12344 commented 1 year ago

Hi, Which build tool used for official Sipeed image 20231023? I would like to download the source code (especially u-boot) to see how can I setup to select boot from SD card.

Maybe could have been a little bit cleaner by opening up a different issue, but I'll give you the benefit of the doubt here.

Believe the Sipeed image is some combination of RevyOS kernel sources and T-Head Semi's Yocto toolchain sources.

I don't expect much to change booting from an SD card other than making sure the DIP switches underneath are set right and using dd to write the images to the SD card.

ccpster commented 1 year ago

@AKeen12344

Hi, Which build tool used for official Sipeed image 20231023? I would like to download the source code (especially u-boot) to see how can I setup to select boot from SD card.

Maybe could have been a little bit cleaner by opening up a different issue, but I'll give you the benefit of the doubt here.

Believe the Sipeed image is some combination of RevyOS kernel sources and T-Head Semi's Yocto toolchain sources.

I don't expect much to change booting from an SD card other than making sure the DIP switches underneath are set right and using dd to write the images to the SD card.

Thank you very much! This is the information I need. I just want to know the u-boot installed on eMMC how it look for extlinux.conf. The pre-installed version does not have environment setup to read from mmc device so I was wondering. I assume this version did some changes to environment variables so it know looking for extlinux.conf in the boot partition.

BTW, I am not familiar in how Sipeed expect on handling development question. I was entering my question from the wiki page, which in turn lead me to github. And still more question in the sense of your statement "Maybe could have been a little bit cleaner by opening up a different issue"? Where to create such issue? Should I always use the wiki github repo? or can I use licheepi4a github repo for general question about licheepi4a?

AKeen12344 commented 1 year ago

@ccpster

Thank you very much! This is the information I need. I just want to know the u-boot installed on eMMC how it look for extlinux.conf. The pre-installed version does not have environment setup to read from mmc device so I was wondering. I assume this version did some changes to environment variables so it know looking for extlinux.conf in the boot partition.

BTW, I am not familiar in how Sipeed expect on handling development question. I was entering my question from the wiki page, which in turn lead me to github. And still more question in the sense of your statement "Maybe could have been a little bit cleaner by opening up a different issue"? Where to create such issue? Should I always use the wiki github repo? or can I use licheepi4a github repo for general question about licheepi4a?

If you were installing the bootloader and U-Boot to SPI flash, having the ability for whatever loads up from SPI to access filesystems on eMMC, etc would be necessary. Kind of want to do that, but at the same time don't since I don't know how accessible the SPI is on either the SOM or motherboard atm, nor my ability to program it even though I do have an Arduino.

I didn't realize it at the time, but I now know that every page on the Sipeed wiki has it's own issue thread on GH and every comment on the wiki adds to that issue. So yeah, I guess that's my bad. The Wiki is pretty much the most accessible way to get questions answered, less so with the dedicated GH page.

jinchenglee commented 10 months ago

Hi, I have a 16g+128g lichee Pi4a board. I've downloaded the LPI4A_FULL_20231214.zip image and tried to flash the board to use latest image. I've tried several times, it always hangs at "Sending sparse 'root' 18/78 (110653 KB)", what could be the problem?

...
请输入烧录目标内存大小（输入8或16）：16
内存大小为 16 G
Warning: skip copying ram image avb footer (ram partition size: 0, ram image size: 963024).
Sending 'ram' (940 KB)                             OKAY [  0.250s]
Writing 'ram'                                      OKAY [  0.002s]
Finished. Total time: 0.263s
Rebooting                                          OKAY [  0.001s]
Finished. Total time: 0.302s
Warning: skip copying uboot image avb footer (uboot partition size: 0, uboot image size: 963024).
Sending 'uboot' (940 KB)                           OKAY [  0.049s]
Writing 'uboot'                                    OKAY [  0.061s]
Finished. Total time: 0.159s
Sending sparse 'boot' 1/1 (85847 KB)               OKAY [  2.925s]
Writing 'boot'                                     OKAY [  3.306s]
Finished. Total time: 6.483s
Sending sparse 'root' 1/78 (114684 KB)             OKAY [  3.780s]
Writing 'root'                                     OKAY [  0.615s]
Sending sparse 'root' 2/78 (114684 KB)             OKAY [  3.682s]
Writing 'root'                                     OKAY [  0.516s]
Sending sparse 'root' 3/78 (110956 KB)             OKAY [  3.726s]
Writing 'root'                                     OKAY [  0.491s]
Sending sparse 'root' 4/78 (114684 KB)             OKAY [  3.882s]
Writing 'root'                                     OKAY [  0.570s]
Sending sparse 'root' 5/78 (109300 KB)             OKAY [  3.737s]
Writing 'root'                                     OKAY [  0.551s]
Sending sparse 'root' 6/78 (106541 KB)             OKAY [  3.611s]
Writing 'root'                                     OKAY [  0.577s]
Sending sparse 'root' 7/78 (114684 KB)             OKAY [  3.843s]
Writing 'root'                                     OKAY [  0.535s]
Sending sparse 'root' 8/78 (109469 KB)             OKAY [  3.316s]
Writing 'root'                                     OKAY [  0.626s]
Sending sparse 'root' 9/78 (106104 KB)             OKAY [  3.192s]
Writing 'root'                                     OKAY [  0.477s]
Sending sparse 'root' 10/78 (113989 KB)            OKAY [  3.665s]
Writing 'root'                                     OKAY [  0.696s]
Sending sparse 'root' 11/78 (114685 KB)            OKAY [  3.733s]
Writing 'root'                                     OKAY [  0.710s]
Sending sparse 'root' 12/78 (114684 KB)            OKAY [  3.527s]
Writing 'root'                                     OKAY [  0.486s]
Sending sparse 'root' 13/78 (114220 KB)            OKAY [  3.676s]
Writing 'root'                                     OKAY [  0.525s]
Sending sparse 'root' 14/78 (113644 KB)            OKAY [  3.865s]
Writing 'root'                                     OKAY [  0.528s]
Sending sparse 'root' 15/78 (102940 KB)            OKAY [  3.226s]
Writing 'root'                                     OKAY [  0.472s]
Sending sparse 'root' 16/78 (114685 KB)            OKAY [  3.749s]
Writing 'root'                                     OKAY [  0.594s]
Sending sparse 'root' 17/78 (112517 KB)            OKAY [  3.699s]
Writing 'root'                                     OKAY [  0.676s]
Sending sparse 'root' 18/78 (110653 KB)      <===== It hangs here forever.

jinchenglee commented 10 months ago

I just tried image LPI4A_BASIC_20231023.zip, it can be flashed without issue. However, image LPI4A_BASIC_20231214.zip hangs when writing 'boot' section. Seems image from Dec., 2023 cannot work on my board (I have no idea which date my board is manufactured).

$>: ~/Downloads/licheePi4A_related/LPI4A_BASIC_20231023$ ./flash_image.sh 
请输入烧录目标内存大小（输入8或16）：16
内存大小为 16 G
Warning: skip copying ram image avb footer (ram partition size: 0, ram image size: 963024).
Sending 'ram' (940 KB)                             OKAY [  0.249s]
Writing 'ram'                                      OKAY [  0.002s]
Finished. Total time: 0.263s
Rebooting                                          OKAY [  0.001s]
Finished. Total time: 0.302s
Warning: skip copying uboot image avb footer (uboot partition size: 0, uboot image size: 963024).
Sending 'uboot' (940 KB)                           OKAY [  0.048s]
Writing 'uboot'                                    OKAY [  0.061s]
Finished. Total time: 0.157s
Sending sparse 'boot' 1/1 (76622 KB)               OKAY [  2.685s]
Writing 'boot'                                     OKAY [  3.356s]
Finished. Total time: 6.297s
Sending sparse 'root' 1/35 (108140 KB)             OKAY [  3.717s]
Writing 'root'                                     OKAY [  0.807s]
Sending sparse 'root' 2/35 (104704 KB)             OKAY [  3.616s]
Writing 'root'                                     OKAY [  0.460s]
Sending sparse 'root' 3/35 (114684 KB)             OKAY [  3.900s]
Writing 'root'                                     OKAY [  0.507s]
Sending sparse 'root' 4/35 (114386 KB)             OKAY [  3.805s]
Writing 'root'                                     OKAY [  0.855s]
Sending sparse 'root' 5/35 (114235 KB)             OKAY [  3.918s]
Writing 'root'                                     OKAY [  0.952s]
Sending sparse 'root' 6/35 (108109 KB)             OKAY [  3.659s]
Writing 'root'                                     OKAY [  0.627s]
Sending sparse 'root' 7/35 (112092 KB)             OKAY [  3.648s]
Writing 'root'                                     OKAY [  0.541s]
Sending sparse 'root' 8/35 (102433 KB)             OKAY [  3.361s]
Writing 'root'                                     OKAY [  0.663s]
Sending sparse 'root' 9/35 (114684 KB)             OKAY [  3.626s]
Writing 'root'                                     OKAY [  0.513s]
Sending sparse 'root' 10/35 (114393 KB)            OKAY [  3.899s]
Writing 'root'                                     OKAY [  0.637s]
Sending sparse 'root' 11/35 (114587 KB)            OKAY [  3.934s]
Writing 'root'                                     OKAY [  0.913s]
Sending sparse 'root' 12/35 (114241 KB)            OKAY [  3.894s]
Writing 'root'                                     OKAY [  0.599s]
Sending sparse 'root' 13/35 (114208 KB)            OKAY [  4.034s]
Writing 'root'                                     OKAY [  1.593s]
Sending sparse 'root' 14/35 (114646 KB)            OKAY [  4.021s]
Writing 'root'                                     OKAY [  1.303s]
Sending sparse 'root' 15/35 (114686 KB)            OKAY [  4.027s]
Writing 'root'                                     OKAY [  1.306s]
Sending sparse 'root' 16/35 (114262 KB)            OKAY [  3.976s]
Writing 'root'                                     OKAY [  1.277s]
Sending sparse 'root' 17/35 (114615 KB)            OKAY [  3.862s]
Writing 'root'                                     OKAY [  0.891s]
Sending sparse 'root' 18/35 (113613 KB)            OKAY [  3.706s]
Writing 'root'                                     OKAY [  0.811s]
Sending sparse 'root' 19/35 (112372 KB)            OKAY [  3.602s]
Writing 'root'                                     OKAY [  0.528s]
Sending sparse 'root' 20/35 (106956 KB)            OKAY [  3.533s]
Writing 'root'                                     OKAY [  1.032s]
Sending sparse 'root' 21/35 (110628 KB)            OKAY [  3.724s]
Writing 'root'                                     OKAY [  0.549s]
Sending sparse 'root' 22/35 (110455 KB)            OKAY [  3.844s]
Writing 'root'                                     OKAY [  1.456s]
Sending sparse 'root' 23/35 (114625 KB)            OKAY [  3.959s]
Writing 'root'                                     OKAY [  0.690s]
Sending sparse 'root' 24/35 (114685 KB)            OKAY [  3.914s]
Writing 'root'                                     OKAY [  0.707s]
Sending sparse 'root' 25/35 (109860 KB)            OKAY [  3.721s]
Writing 'root'                                     OKAY [  0.498s]
Sending sparse 'root' 26/35 (102940 KB)            OKAY [  3.379s]
Writing 'root'                                     OKAY [  1.458s]
Sending sparse 'root' 27/35 (114317 KB)            OKAY [  3.835s]
Writing 'root'                                     OKAY [  0.713s]
Sending sparse 'root' 28/35 (114617 KB)            OKAY [  3.778s]
Writing 'root'                                     OKAY [  1.748s]
Sending sparse 'root' 29/35 (114662 KB)            OKAY [  3.825s]
Writing 'root'                                     OKAY [  2.722s]
Sending sparse 'root' 30/35 (114615 KB)            OKAY [  3.869s]
Writing 'root'                                     OKAY [  1.409s]
Sending sparse 'root' 31/35 (110068 KB)            OKAY [  3.461s]
Writing 'root'                                     OKAY [  1.084s]
Sending sparse 'root' 32/35 (114684 KB)            OKAY [  3.671s]
Writing 'root'                                     OKAY [  1.092s]
Sending sparse 'root' 33/35 (114448 KB)            OKAY [  3.903s]
Writing 'root'                                     OKAY [  1.474s]
Sending sparse 'root' 34/35 (104573 KB)            OKAY [  3.332s]
Writing 'root'                                     OKAY [  0.559s]
Sending sparse 'root' 35/35 (39024 KB)             OKAY [  1.175s]
Writing 'root'                                     OKAY [  0.187s]
Finished. Total time: 164.053s
烧录完成

vladimir-dudnik-1 commented 10 months ago

make sure you use 'burn_tools_support_bigimage.zip' according to instructions on LicheePi Wiki site. When I use that, I was able to successfully burn both 20231023 and 20231214 images. My board is LicheePi 4A 16g + 128g.

jinchenglee commented 10 months ago

Hi, I have a 16g+128g lichee Pi4a board. I've downloaded the LPI4A_FULL_20231214.zip image and tried to flash the board to use latest image. I've tried several times, it always hangs at "Sending sparse 'root' 18/78 (110653 KB)", what could be the problem?

...
请输入烧录目标内存大小（输入8或16）：16
内存大小为 16 G
Warning: skip copying ram image avb footer (ram partition size: 0, ram image size: 963024).
Sending 'ram' (940 KB)                             OKAY [  0.250s]
Writing 'ram'                                      OKAY [  0.002s]
Finished. Total time: 0.263s
Rebooting                                          OKAY [  0.001s]
Finished. Total time: 0.302s
Warning: skip copying uboot image avb footer (uboot partition size: 0, uboot image size: 963024).
Sending 'uboot' (940 KB)                           OKAY [  0.049s]
Writing 'uboot'                                    OKAY [  0.061s]
Finished. Total time: 0.159s
Sending sparse 'boot' 1/1 (85847 KB)               OKAY [  2.925s]
Writing 'boot'                                     OKAY [  3.306s]
Finished. Total time: 6.483s
Sending sparse 'root' 1/78 (114684 KB)             OKAY [  3.780s]
Writing 'root'                                     OKAY [  0.615s]
Sending sparse 'root' 2/78 (114684 KB)             OKAY [  3.682s]
Writing 'root'                                     OKAY [  0.516s]
Sending sparse 'root' 3/78 (110956 KB)             OKAY [  3.726s]
Writing 'root'                                     OKAY [  0.491s]
Sending sparse 'root' 4/78 (114684 KB)             OKAY [  3.882s]
Writing 'root'                                     OKAY [  0.570s]
Sending sparse 'root' 5/78 (109300 KB)             OKAY [  3.737s]
Writing 'root'                                     OKAY [  0.551s]
Sending sparse 'root' 6/78 (106541 KB)             OKAY [  3.611s]
Writing 'root'                                     OKAY [  0.577s]
Sending sparse 'root' 7/78 (114684 KB)             OKAY [  3.843s]
Writing 'root'                                     OKAY [  0.535s]
Sending sparse 'root' 8/78 (109469 KB)             OKAY [  3.316s]
Writing 'root'                                     OKAY [  0.626s]
Sending sparse 'root' 9/78 (106104 KB)             OKAY [  3.192s]
Writing 'root'                                     OKAY [  0.477s]
Sending sparse 'root' 10/78 (113989 KB)            OKAY [  3.665s]
Writing 'root'                                     OKAY [  0.696s]
Sending sparse 'root' 11/78 (114685 KB)            OKAY [  3.733s]
Writing 'root'                                     OKAY [  0.710s]
Sending sparse 'root' 12/78 (114684 KB)            OKAY [  3.527s]
Writing 'root'                                     OKAY [  0.486s]
Sending sparse 'root' 13/78 (114220 KB)            OKAY [  3.676s]
Writing 'root'                                     OKAY [  0.525s]
Sending sparse 'root' 14/78 (113644 KB)            OKAY [  3.865s]
Writing 'root'                                     OKAY [  0.528s]
Sending sparse 'root' 15/78 (102940 KB)            OKAY [  3.226s]
Writing 'root'                                     OKAY [  0.472s]
Sending sparse 'root' 16/78 (114685 KB)            OKAY [  3.749s]
Writing 'root'                                     OKAY [  0.594s]
Sending sparse 'root' 17/78 (112517 KB)            OKAY [  3.699s]
Writing 'root'                                     OKAY [  0.676s]
Sending sparse 'root' 18/78 (110653 KB)      <===== It hangs here forever.

This has been resolved. Please see vladimir-dudnik-1's reply above.

theron29 commented 9 months ago

Hi there, First: thank you for the great work you are doing.

A have several questions though: 1) The dtb file with 2Ghz is missing from current images. Are there plans to include these in the future again please? 2) When can we please expect builds with newer kernels? :sweat_smile: Thanks.

ojenning commented 4 weeks ago

Hello, need help with board version: 51603

[ 5091.523274] usb 1-3: new high-speed USB device number 6 using xhci_hcd [ 5091.523916] usb 1-3: Device not responding to setup address. [ 5091.735915] usb 1-3: Device not responding to setup address. [ 5091.947304] usb 1-3: device not accepting address 6, error -71 [ 5092.851303] usb usb1-port3: Cannot enable. Maybe the USB cable is bad? [ 5092.854431] usb usb1-port3: unable to enumerate USB device test@athena:~/Projekte/LiCheePi/MegaCloud/LPI4A_20240602$ sudo ./fastboot flash ram u-boot-with-spl-sbc16g.bin < waiting for any device >

Host: Debian 12.7

I tried three USB cable. Is there a change in this board version?

sipeed / sipeed_wiki

[Gitalk:/hardware/en/lichee/th1520/lpi4a/3_images.html] 镜像集合 - Sipeed Wiki #449