Open troyth opened 11 years ago
This is how you'll set it up:
lib
and put the app.js
file in there"main": "lib/app",
app.js
file from the week 3 demo to use a microphone that you will treat as a simple analog sensor, then test it out on your laptop!@jnquick can you take this one on? You have the Arduino background, so I think it would be good for you to tackle the first major programming hurdle. Once you get one mic connecting to a laptop, you can start to test how many mics can simultaneously feed to a laptop. @yz2428 can then port this to the Raspberry Pi, and you two can work to figure out the max number of mics per Raspberry Pi/Arduino setup, then you can work with @YifengWu to finalize the grid design for #2.
Cool?
Sounds good.
On Sunday, September 29, 2013, Troy Conrad Therrien wrote:
@jnquick https://github.com/jnquick can you take this one on? You have the Arduino background, so I think it would be good for you to tackle the first major programming hurdle. Once you get one mic connecting to a laptop, you can start to test how many mics can simultaneously feed to a laptop. @yz2428 https://github.com/yz2428 can then port this to the Raspberry Pi, and you two can work to figure out the max number of mics per Raspberry Pi/Arduino setup, then you can work with @YifengWuhttps://github.com/YifengWuto finalize the grid design for
2 https://github.com/site2site/Studio-Analytics/issues/2.
Cool?
— Reply to this email directly or view it on GitHubhttps://github.com/site2site/Studio-Analytics/issues/3#issuecomment-25326923 .
James Quick
M.Arch I Candidate, 2015 GSAPP, Columbia University P: (845) 332 0423 E: j.n.quick@gmail.com jnq2000@columbia.edu
Yeah, @jnquick and I can figure out the Raspberry Pi/Arduino setup together. I'm very willing to assist with the programming and Arduino-mic hookup as well.
Charles
On Sun, Sep 29, 2013 at 3:23 PM, jnquick notifications@github.com wrote:
Sounds good.
On Sunday, September 29, 2013, Troy Conrad Therrien wrote:
@jnquick https://github.com/jnquick can you take this one on? You have the Arduino background, so I think it would be good for you to tackle the first major programming hurdle. Once you get one mic connecting to a laptop, you can start to test how many mics can simultaneously feed to a laptop. @yz2428 https://github.com/yz2428 can then port this to the Raspberry Pi, and you two can work to figure out the max number of mics per Raspberry Pi/Arduino setup, then you can work with @YifengWu< https://github.com/YifengWu>to finalize the grid design for
2 https://github.com/site2site/Studio-Analytics/issues/2.
Cool?
— Reply to this email directly or view it on GitHub< https://github.com/site2site/Studio-Analytics/issues/3#issuecomment-25326923>
.
James Quick
M.Arch I Candidate, 2015 GSAPP, Columbia University P: (845) 332 0423 E: j.n.quick@gmail.com jnq2000@columbia.edu
— Reply to this email directly or view it on GitHubhttps://github.com/site2site/Studio-Analytics/issues/3#issuecomment-25327041 .
You Zhou Columbia University | GSAPP | M.Arch 2015 e: yz2428@columbia.edu t: (+1) 214 289 8804
Hey we got one mic feeding to the console. They range of readings is fairly small, but I assume that has to do with the resistor we were using. I am hoping to procure more jumper cables and resistors early tomorrow, at which time we will work on getting multiple mics to record data. Is there a way to determine the correct spec for a resistor?
The first technical step is to set up a microphone to connect through an Arduino using Johnny-Five to a laptop. This will resemble the example demo we did in Week 3 using a mic rather than a photoresistor.
Let me know who wants to take this on as a task and I'll be in touch soon with more information.