search

sjseth / AI-Case-Sorter

This project contains the assets and resources for creating the AI Case sorter project as seen at: https://youtu.be/KBhd5qHZM7I
GNU General Public License v3.0
36 stars 8 forks source link

BF556 feed adapter adjustment #17

Closed anticolon closed 1 year ago

anticolon commented 1 year ago

Don't know if this is the right way to go about changes to a closed issue, but here i go. Correct me if I should have done it some other way. :)

Printed it, and i think it needs 0,5mm more, so could you update it to 17mm inner diameter. Lengthwise it's perfect.

Originally posted by @anticolon in https://github.com/sjseth/AI-Case-Sorter/issues/16#issuecomment-1339792251_

sjseth commented 1 year ago

I am guessing it is probably related to shrinkage. Can you measure your printed item to see if what the ID is? If it is not 16.5, you might try scaling it up by 1 or 2 percent.

If it did print out exactly at 16.5mm and is too small, I am happy to increase the ID to 17.

anticolon commented 1 year ago

The inner diameter is 16.4 or so.. so maybe a bit of shrinkage. I'll try printing it +1% scale, just worried that the nut won't fit as it is a bit tight already (then again i should just print that larger as well). :-) I'll get back to you.

sjseth commented 1 year ago

Thanks for the update Karl. I have no problem making it bigger and I don't think .5mm will have much effect anyhow so I will go ahead and update it.

sjseth commented 1 year ago

Sorry, just realized that Karl and Anticolon are 1 in the same... I have updated the part.

anticolon commented 1 year ago

Hehe, I just added my name to the profile, thought it would be nicer that way. Thanks for updating, I'll print a new one tomorrow and get back to you. Midnight here in Sweden. 😀

anticolon commented 1 year ago

Printed and verified, works perfectly now that you made the ID 17mm.