search

skastenholz / MMM-DVB

MagicMirror² module - DVB (Dresden public transport) station monitor
MIT License
13 stars 5 forks source link

No Data #2

Closed ostfilinchen closed 2 years ago

ostfilinchen commented 7 years ago

Hello,

i have installed the module but i get no data. The result is "Keine Verbindungen".

The config i set like in the readme. Can u please check this.

PS: My rpi is up to date and also the MM.

Regards Daniel

daknoblo commented 7 years ago

Please paste your configuration.

ostfilinchen commented 7 years ago

So here is the log from npm install: npm WARN deprecated minimatch@0.2.14: Please update to minimatch 3.0.2 or higher to avoid a RegExp DoS issue npm WARN deprecated minimatch@0.3.0: Please update to minimatch 3.0.2 or higher to avoid a RegExp DoS issue npm WARN deprecated graceful-fs@1.2.3: graceful-fs v3.0.0 and before will fail on node releases >= v7.0. Please update to graceful-fs@^4.0.0 as soon as possible. Use 'npm ls graceful-fs' to find it in the tree. npm WARN prefer global jshint@2.9.5 should be installed with -g MMM-DVB@0.0.1 E:\MagicMirror\modules\MMM-DVB +-- dvbjs@4.3.5 | +-- proj4@2.4.4 | | +-- mgrs@1.0.0 | | -- wkt-parser@1.2.0 | +-- request@2.81.0 | | +-- aws-sign2@0.6.0 | | +-- aws4@1.6.0 | | +-- caseless@0.12.0 | | +-- combined-stream@1.0.5 | | |-- delayed-stream@1.0.0 | | +-- extend@3.0.1 | | +-- forever-agent@0.6.1 | | +-- form-data@2.1.4 | | | -- asynckit@0.4.0 | | +-- har-validator@4.2.1 | | | +-- ajv@4.11.8 | | | | +-- co@4.6.0 | | | |-- json-stable-stringify@1.0.1 | | | | -- jsonify@0.0.0 | | |-- har-schema@1.0.5 | | +-- hawk@3.1.3 | | | +-- boom@2.10.1 | | | +-- cryptiles@2.0.5 | | | +-- hoek@2.16.3 | | | -- sntp@1.0.9 | | +-- http-signature@1.1.1 | | | +-- assert-plus@0.2.0 | | | +-- jsprim@1.4.1 | | | | +-- assert-plus@1.0.0 | | | | +-- extsprintf@1.3.0 | | | | +-- json-schema@0.2.3 | | | |-- verror@1.10.0 | | | | -- assert-plus@1.0.0 | | |-- sshpk@1.13.1 | | | +-- asn1@0.2.3 | | | +-- assert-plus@1.0.0 | | | +-- bcrypt-pbkdf@1.0.1 | | | +-- dashdash@1.14.1 | | | | -- assert-plus@1.0.0 | | | +-- ecc-jsbn@0.1.1 | | | +-- getpass@0.1.7 | | | |-- assert-plus@1.0.0 | | | +-- jsbn@0.1.1 | | | -- tweetnacl@0.14.5 | | +-- is-typedarray@1.0.0 | | +-- isstream@0.1.2 | | +-- json-stringify-safe@5.0.1 | | +-- mime-types@2.1.16 | | |-- mime-db@1.29.0 | | +-- oauth-sign@0.8.2 | | +-- performance-now@0.2.0 | | +-- qs@6.4.0 | | +-- safe-buffer@5.1.1 | | +-- stringstream@0.0.5 | | +-- tough-cookie@2.3.2 | | | -- punycode@1.4.1 | | +-- tunnel-agent@0.6.0 | |-- uuid@3.1.0 | -- request-promise@4.2.1 | +-- bluebird@3.5.0 | +-- request-promise-core@1.1.1 |-- stealthy-require@1.1.1 +-- grunt@0.4.5 | +-- async@0.1.22 | +-- coffee-script@1.3.3 | +-- colors@0.6.2 | +-- dateformat@1.0.2-1.2.3 | +-- eventemitter2@0.4.14 | +-- exit@0.1.2 | +-- findup-sync@0.1.3 | | +-- glob@3.2.11 | | | +-- inherits@2.0.3 | | | -- minimatch@0.3.0 | |-- lodash@2.4.2 | +-- getobject@0.1.0 | +-- glob@3.1.21 | | +-- graceful-fs@1.2.3 | | -- inherits@1.0.2 | +-- grunt-legacy-log@0.1.3 | | +-- grunt-legacy-log-utils@0.1.1 | | | +-- lodash@2.4.2 | | |-- underscore.string@2.3.3 | | +-- lodash@2.4.2 | | -- underscore.string@2.3.3 | +-- grunt-legacy-util@0.2.0 | |-- lodash@0.9.2 | +-- hooker@0.2.3 | +-- iconv-lite@0.2.11 | +-- js-yaml@2.0.5 | | +-- argparse@0.1.16 | | | +-- underscore@1.7.0 | | | -- underscore.string@2.4.0 | |-- esprima@1.0.4 | +-- lodash@0.9.2 | +-- minimatch@0.2.14 | | +-- lru-cache@2.7.3 | | -- sigmund@1.0.1 | +-- nopt@1.0.10 | |-- abbrev@1.1.0 | +-- rimraf@2.2.8 | +-- underscore.string@2.2.1 | -- which@1.0.9 +-- grunt-cli@1.2.0 | +-- findup-sync@0.3.0 | |-- glob@5.0.15 | | +-- inflight@1.0.6 | | | -- wrappy@1.0.2 | | +-- minimatch@3.0.4 | | +-- once@1.4.0 | |-- path-is-absolute@1.0.1 | +-- grunt-known-options@1.1.0 | +-- nopt@3.0.6 | -- resolve@1.1.7 +-- grunt-contrib-csslint@2.0.0 | +-- chalk@1.1.3 | | +-- ansi-styles@2.2.1 | | +-- escape-string-regexp@1.0.5 | | +-- has-ansi@2.0.0 | | |-- ansi-regex@2.1.1 | | +-- strip-ansi@3.0.1 | | -- supports-color@2.0.0 | +-- csslint@1.0.5 | | +-- clone@2.1.1 | |-- parserlib@1.1.1 | +-- lodash@4.17.4 | -- strip-json-comments@2.0.1 +-- grunt-contrib-jshint@1.1.0 |-- jshint@2.9.5 | +-- cli@1.0.1 | | -- glob@7.1.2 | | +-- fs.realpath@1.0.0 | |-- minimatch@3.0.4 | +-- console-browserify@1.1.0 | | -- date-now@0.1.4 | +-- htmlparser2@3.8.3 | | +-- domelementtype@1.3.0 | | +-- domhandler@2.3.0 | | +-- domutils@1.5.1 | | |-- dom-serializer@0.1.0 | | | +-- domelementtype@1.1.3 | | | -- entities@1.1.1 | | +-- entities@1.0.0 | |-- readable-stream@1.1.14 | | +-- core-util-is@1.0.2 | | +-- isarray@0.0.1 | | -- string_decoder@0.10.31 | +-- lodash@3.7.0 | +-- minimatch@3.0.4 | |-- brace-expansion@1.1.8 | | +-- balanced-match@1.0.0 | | -- concat-map@0.0.1 | +-- shelljs@0.3.0 |-- strip-json-comments@1.0.4 +-- grunt-cssbeautifier@0.1.2 | -- cssbeautify@0.3.1 +-- grunt-jsbeautifier@0.2.13 | +-- async@2.5.0 | +-- js-beautify@1.6.14 | | +-- config-chain@1.1.11 | | |-- proto-list@1.2.4 | | +-- editorconfig@0.13.3 | | | +-- commander@2.11.0 | | | -- lru-cache@3.2.0 | | |-- pseudomap@1.0.2 | | +-- mkdirp@0.5.1 | | | -- minimist@0.0.8 | |-- nopt@3.0.6 | +-- rc@1.2.1 | | +-- deep-extend@0.4.2 | | +-- ini@1.3.4 | | -- minimist@1.2.0 | +-- semver@5.4.1 |-- underscore.string@3.3.4 | +-- sprintf-js@1.1.1 | -- util-deprecate@1.0.2 +-- grunt-markdownlint@1.0.41 |-- markdownlint@0.6.0 | -- markdown-it@8.3.2 | +-- argparse@1.0.9 | |-- sprintf-js@1.0.3 | +-- entities@1.1.1 | +-- linkify-it@2.0.3 | +-- mdurl@1.0.1 | -- uc.micro@1.0.3 -- time-grunt@1.4.0 +-- date-time@1.1.0 | -- time-zone@0.1.0 +-- figures@1.7.0 |-- object-assign@4.1.1 +-- number-is-nan@1.0.1 +-- pretty-ms@2.1.0 | +-- is-finite@1.0.2 | +-- parse-ms@1.0.1 | -- plur@1.0.0 -- text-table@0.2.0

And here is my config: { module: 'MMM-DVB', position: 'top_left', config: { stopName: "Hauptbahnhof", // Which stop would you like to have displayed? timeOffset: 5, // With how many minutes in advance should connections be displayed? resultNum: 5, // How many connections should be displayed? //lines: ["1", "2"], // What lines should be displayed? //directions: ["Striesen"], // What directions should be displayed? reload: 60000 // How often should the information be updated? (In milliseconds) } },

daknoblo commented 7 years ago

Config looks good, but i think the problem is that there is no direct connect from Hauptbahnhof to direction Striesen with Line 1 or 2. These lines are starting from Pirnaischer Platz to Striesen, so you have to choose a Line which is travelling from Hauptbahnhof to Pirnaischer Platz and then change to Line 1 or 2.

Maybe you can try Line 10 from Hauptbahnhof to Striesen or Bus 61.

ostfilinchen commented 7 years ago

no. same result

    {
       module: 'MMM-DVB',
       position: 'top_left',
       config: {
          stopName: "Hauptbahnhof", // Which stop would you like to have displayed?
          timeOffset: 5,  // With how many minutes in advance should connections be displayed?
          resultNum: 5, // How many connections should be displayed?
          lines: ["10", "61"], // What lines should be displayed?
          //directions: ["Striesen"], // What directions should be displayed?
          reload: 60000 // How often should the information be updated? (In milliseconds)
                }
    }

also with 

    {
       module: 'MMM-DVB',
       position: 'top_left',
       config: {
          stopName: "Hauptbahnhof", // Which stop would you like to have displayed?
          timeOffset: 5,  // With how many minutes in advance should connections be displayed?
          resultNum: 5, // How many connections should be displayed?
          lines: ["10", "61"], // What lines should be displayed?
          directions: ["Striesen"], // What directions should be displayed?
          reload: 60000 // How often should the information be updated? (In milliseconds)
                }
    }
daknoblo commented 7 years ago

Do you get any results if you leave Directions empty and choose a well frequented line (7, 8, 10) ?

ostfilinchen commented 7 years ago

no data...

this is what i get in dev-mode (MMM-DVB.js Line 162): Response: {"id":"module_5_MMM-DVB","connections":[]}

and this the request of line 156: Request: {"id":"module_5_MMM-DVB","stopName":"Hauptbahnhof","timeOffset":5,"resultNum":5,"lines":[],"directions":[]}

skastenholz commented 7 years ago

Hi Daniel,

can you please try to disable the "lines" and "directions" options completely:

{
   module: 'MMM-DVB',
   position: 'top_left',
   config: {
      stopName: 'Hauptbahnhof',
      timeOffset: 5,
      resultNum: 5,
      reload: 60000
   }
}

Best regards, Stefan

ostfilinchen commented 7 years ago

Hi Stefan,

no, same result: "Keine Verbindungen verfügbar".

Best regards, Daniel

2017-10-31 22:32 GMT+01:00 Stefan Kastenholz notifications@github.com:

Hi Daniel,

can you please try to disable the "lines" and "directions" options completely:

{ module: 'MMM-DVB', position: 'top_left', config: { stopName: 'Hauptbahnhof', timeOffset: 5, resultNum: 5, reload: 60000 } }

Best regards, Stefan

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/skastenholz/MMM-DVB/issues/2#issuecomment-340913767, or mute the thread https://github.com/notifications/unsubscribe-auth/AVuCZfIYy_ZWvftd-LoD02MmuQdedI-uks5sx5H_gaJpZM4O6IHG .

skastenholz commented 7 years ago

Hi Daniel,

I suggest the following steps: 1) Can you please install the https://github.com/yo-less/MMM-KVV module for testing purposes. I would like to verify if the issue is module-specific. 2) Can you please share your magic mirror installation folder? I would like to verify if the issue is related to the Magic Mirror setup.

Thank you!

Best regards, Stefan

ostfilinchen commented 6 years ago

Hi Stefan,

for testing purposes I have installed the MMM-KVV. This module works for me.

Which folder need you in the MagicMirror installation?

Regards Daniel

Am 04.11.2017 16:53 schrieb "Stefan Kastenholz" notifications@github.com:

Hi Daniel,

I suggest the following steps:

  1. Can you please install the https://github.com/yo-less/MMM-KVV module for testing purposes. I would like to verify if the issue is module-specific.
  2. Can you please share your magic mirror installation folder? I would like to verify if the issue is related to the Magic Mirror setup.

Thank you!

Best regards, Stefan

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/skastenholz/MMM-DVB/issues/2#issuecomment-341907665, or mute the thread https://github.com/notifications/unsubscribe-auth/AVuCZX3REzHPzWvm3Pxun7TQ0o1I9Gcwks5szIh8gaJpZM4O6IHG .

ostfilinchen commented 6 years ago

Hi... me again,

after I installed the MMM-KVV and reinstall your module - it works.

Looks that anything missing in your installationscript.

Regards Daniel

Am 16.11.2017 18:17 schrieb "Mr. Filinchen" ostfilinchen@gmail.com:

Hi Stefan,

for testing purposes I have installed the MMM-KVV. This module works for me.

Which folder need you in the MagicMirror installation?

Regards Daniel

Am 04.11.2017 16:53 schrieb "Stefan Kastenholz" <notifications@github.com

:

Hi Daniel,

I suggest the following steps:

  1. Can you please install the https://github.com/yo-less/MMM-KVV module for testing purposes. I would like to verify if the issue is module-specific.
  2. Can you please share your magic mirror installation folder? I would like to verify if the issue is related to the Magic Mirror setup.

Thank you!

Best regards, Stefan

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/skastenholz/MMM-DVB/issues/2#issuecomment-341907665, or mute the thread https://github.com/notifications/unsubscribe-auth/AVuCZX3REzHPzWvm3Pxun7TQ0o1I9Gcwks5szIh8gaJpZM4O6IHG .

skastenholz commented 6 years ago

Hi Daniel,

before I answered you 14 days ago I setup a fresh MM installation and installed MMM-DVB only. Therefore, I cannot reconstruct your situation.

Best regards, Stefan

ChrissisCorner commented 5 years ago

Hello, I downloaded and installed it aswell. But it doesn't even display on the screen. The rest is working fine and I can't figure out what it is. Any ideas?

skastenholz commented 5 years ago

Hi Chrissi,

it seems like there was an API change in a downstream dependency. Can you please checkout the latest code and re-evaluate? Thanks.

Best regards, Stefan

ChrissisCorner commented 5 years ago

Hello Stefan,

I tried again and still can't get it to work.