skiselev
commented
1 year ago A couple of things to check:
- Do you see the Multi-Floppy BIOS Extension messages/prompts when the system boots? If not, check that you have flashed that to the Flash ROM, and properly configured the ROM address
- Disable floppies in the system BIOS
- Disable the on board FDC if any (usually on P2 boards came with one)
- Of course, it could be a faulty FDC... if nothing else helps, try swapping it with another FDC
BTW, I haven't tested Monster FDC on much newer systems (e.g. P2), and there might be some issues there...
Hello,
i get "Drive not ready" on all drives i try to connect. I tried different cables with a 1.44MB and a 1.2MB Drive. When accessing a: or b: the correct drive responds and lights up. But only two anounce drive not ready after some seconds.
I tried in a P2 and a 386sx.
Do you have and idea what could be the reason?
Thank you :-)