Zibo B738 wont move after pushback

[YYZ342]

Observed with Zibo 3.42.24 and 3.42.25 with XP11.50b17 and BP0.48:

• initial full pushback cycle goes ok as normal no issues
• begin taxi plane will not move forward or reverse under any power level applied. It is as if it is “glued” to the ground.
• recalling push back results in hook up process going ok but no pushback takes place this time.
• chocks are removed
• cycled parking brake with B and from the cockpit
• taxi is back to normal if the aircraft did not use better pushback

Cheers

[rafaeldamasceno]

I can also verify I have the exact same issues, with the exact same versions tested.