Closed monster4866 closed 6 months ago
uh oh, that doesn't sound good! these screen shots don;t show the bitaxe in overtemp protection mode.. Do you ever see a hashrate above 0?
with 2.1.1 it runs for a while,I'll see what happens, It was also the case with the other versions that the hashrate ran occasionally for a while
Ok, so it is hashing in the beginning. In the case where it is hashing for a while and then stops, that's usually a network problem or a stratum/pool problem. What pool are you using?
hi, after the update to 2.1.1 it has been running for 17 hours now, I have 9 more bitaxes in my own network, they run without any problems, I use ckpool
ok, keep an eye on it. It would be very helpful to see a log from when this happens.
2 days - no problems, I'm surprised that the update seems to have solved the problem. I probably flashed the bitaxe 5-6 times with each firmware and the same problem every time, until after the update
can therefore be closed as solved @all: just update to 2.1.1 :D
Hi, my bitaxe 202 (ultra) keeps restarting after 30 seconds, then goes into protection mode, no matter what settings, whether 485/1200 or more or less, sometimes it goes for 20 minutes. Then it crashes and it freezes .
I have already tried all versions (factory reset), from 2.0.3 to 2.1.0
the logs shows nothing, or if it runs for a while the normal stuff