search

skot / ESP-Miner

A bitcoin ASIC miner for the ESP32
GNU General Public License v3.0
357 stars 132 forks source link

SELF TEST POWER: FAIL with v2.1.2 and v2.1.3 and BItAxe Supra PCB Rev 401 #145

Closed hanleyp closed 7 months ago

hanleyp commented 7 months ago

SELF TEST POWER: FAIL with v2.1.2 and v2.1.3 and BItAxe Supra PCB Rev 401

To Reproduce Steps to reproduce the behavior:

  1. Upgrade to v2.1.2 or v2.1.3 using asp-miner.bin via web or esp-miner-factory-401-v2.1.2/3 using web.
  2. Reboot and see failure. This always occurs for me with v2.1.2 and v2.1.3. v2.1.1 is working (no SELF TEST). But I had to restore with esp-miner-factory-205-v2.1.1.bin.

Expected behavior SELF TEST POWER: PASS

Hardware (please complete the following information):

hanleyp commented 7 months ago

Looks like 'power_consumption_pass' is set to < 13, but I'm getting higher.

I was able to get it to update to v2.1.3 by setting frequency down to 400 (just below 13W) and using the web interface to update the fw.

19201003080114 commented 7 months ago

Looks like 'power_consumption_pass' is set to < 13, but I'm getting higher.

I was able to get it to update to v2.1.3 by setting frequency down to 400 (just below 13W) and using the web interface to update the fw.

Maybe better to use v2.1.1 until the self-test issue is resolved. Per the release notes v2.1.1 should work with Supra (since v2.1.0) I have Ultra 1366 and I am staying at v2.1.1 for now.

Shen commented 5 months ago

Why is this issue closed? It's still not working.

skot commented 5 months ago

Why is this issue closed? It's still not working.

What's not working for you, specifically?

Shen commented 5 months ago

What's not working for you, specifically?

SELF TEST POWER: FAIL Bitaxe HW version: Supra 400 Bitaxe HW vendor: d-central.tech ESP-Miner FW version: 2.1.3 (with https://wantclue.github.io/bitaxe-web-flasher/) Voltage:1.2V

With V 2.1.1 the system boots regulary.

skot commented 5 months ago

Are you using the "factory" image? This is only for first-time programming (ie at a factory). Please try the "just update" image if you are not already.

Shen commented 5 months ago

Are you using the "factory" image? This is only for first-time programming (ie at a factory). Please try the "just update" image if you are not already.

Yes, I used the "factory"-Image. Which other file is the right one? esp-miner.bin and www.bin don't work. The BitAxe is doing nothing if I flash this files. I tried to just update. SELF TEST POWER: FAIL

skot commented 5 months ago

Ah, ok I think we have a confusing setup here. I'll release a new esp-miner with this cleared up, hopefully. https://github.com/skot/ESP-Miner/issues/177

in the mean time can you use v2.1.1?

Shen commented 5 months ago

Yes, thank you! I will try out the new version when it is ready.