search

skot / ESP-Miner

A bitcoin ASIC miner for the ESP32
GNU General Public License v3.0
357 stars 132 forks source link

Unstable mining, restart every several hours #175

Closed mutatrum closed 5 months ago

mutatrum commented 5 months ago

Describe the bug I'm running a BitAxe 400 (Supra), and experience unstable mining. It restarts frequently, and on several occasions it doesn't start mining again, running idle, either because it didn't restart accepting shares, or because it reverted to the factory wifi.

Expected behaviour Less frequent restarts, and resume mining when it happens.

Screenshots & Photos I have captured system/info every minute for an extended period of time, and created the following chart (shares on left y-axis, uptime in hours on right y-axis):

chart (9)

There are 3 noticeable things:

1) Most times it restarts after several hours. However, sometimes there are periods with very frequent restarts. For example, on the 18th it had 7 restarts in ~90 minutes (just above the 2024 of the first date label on the x-axis). 2) In some cases it restarts, connects to the wifi and no shares are accepted. These are the two large blue slopes. Unfortunately, it never restarts by itself when this happens. I think this is caused by #100 3) In some occasions, after a restart it comes up with the factory wifi setup. In the graph these are shows with 0 uptime, once is visible at the end of the graph. I have seen this happen twice. Power cycling fixes this, so maybe it's a race condition on reading the configuration?

Hardware (please complete the following information):

Additional context Initially I had the UI open, and after reading some information it hinted that this could be a trigger. However, closing down the UI it didn't make a difference. The only use of the webserver is the polling of system/info once a minute.

Any additional logging/debugging pointers would also be helpful.

benjamin-wilson commented 5 months ago

Change the frequency to the default 490 mhz or under and see if the issue persists

mutatrum commented 5 months ago

Set it to 490, will report back in a day or so. For the record, it came with 550 set, I thought that was the default. I didn't change any settings other that the pool settings.

benjamin-wilson commented 5 months ago

Closing (assumed resolved)

mutatrum commented 5 months ago

Unfortunately it's not resolved yet. After setting the frequency to 490, it is a lot more stable, but still resets after ~ 8 hours.

image Left y-axis is uptime (hr), right y-axis is shares.

In two cases, it didn't start mining, where the shares stay at 0, one is just right of center, second is the large spike at the end. It doesn't automatically reset when this happens, I power cycle it to get it to resume so there is something in the mining process that triggers the reset. I initially though it was related to the connectivity, but that doesn't seem the case as the machine is perfectly reachable all the time.

mutatrum commented 5 months ago

Upgraded firmware to 2.1.6 and capturing logs, hopefully that will bring something #179.

benjamin-wilson commented 5 months ago

We're aware of a restart bug affecting 2.1.4+ and have a fix, it should be ready soon.

mutatrum commented 5 months ago

Running 2.1.8, and as long as I don't open the websocket connection it is stable, crossed the 24h mark just now.

solobito commented 5 months ago

Running 2.1.8, and as long as I don't open the websocket connection it is stable, crossed the 24h mark just now.

Please, if you can, test this. Just to confirm that it restarts with that script. https://github.com/skot/ESP-Miner/issues/199#issuecomment-2149171200