sksushilkumar / red5phone

Automatically exported from code.google.com/p/red5phone
0 stars 0 forks source link

No Sound!!! #163

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago
I installed the red5phone to Ubuntu.

Asterisk is ok, and Red5 server also good.

If I call using the red5phone, The calling is ok.

But after the calling is estated, I can't hear and talk any sound.

Why this happen?

Red5 log and asterisk log is ok. Nothing any issue.

Please help me...

Best Regards.
Mark.

Original issue reported on code.google.com by aquaris...@gmail.com on 5 Aug 2011 at 3:55

GoogleCodeExporter commented 9 years ago
Do make sure you have the correct codec setup in asterisk sip.conf extension 
settings.
Try using ulaw as the codec. Refer link below:
http://www.voip-info.org/wiki/view/Asterisk+config+sip.conf

Original comment by harikuma...@gmail.com on 5 Aug 2011 at 5:13

GoogleCodeExporter commented 9 years ago
Thank you.

I already solved the problem after I read your article in last time.

Original comment by aquaris...@gmail.com on 5 Aug 2011 at 5:59

GoogleCodeExporter commented 9 years ago
I face the same problem, could you please tell me the solution for this problem?

Original comment by chhay.so...@realwat.net on 10 Sep 2011 at 6:56

GoogleCodeExporter commented 9 years ago
I have the same problem too.
Please tell how to fix this problem?

Original comment by sms48...@gmail.com on 11 Sep 2011 at 4:24

GoogleCodeExporter commented 9 years ago
That's why the red5phone-r53 version have problem.

It's not tested.

Please use the lower version.

I have not used r-54 version yet.

I am using r-49 version. It's ok.

Original comment by aquaris...@gmail.com on 11 Sep 2011 at 7:15

GoogleCodeExporter commented 9 years ago
where do i find the r-49 ? i do not see it in the download list. i am having 
trouble with voice [completely silent].

however, it could be due to my lack of knowledge in this matter:

my setup is like this:

red5 : v1.0 RC1 , running on all default ports 
red5phone: r-54
asterisk and red5 are installed on the same machine.

flex phone setup:

- login: xxx 
- password: xxx
- sip realm: asterisk
- sip server: localhost
- sip proxy: localhost
- red5 url : rtmp:/sip    [this is where i am really confused]

and i am not getting any audio in any direction. the registration and calling 
works fine.

Original comment by shroukK...@gmail.com on 26 Sep 2011 at 6:52

GoogleCodeExporter commented 9 years ago
[deleted comment]
GoogleCodeExporter commented 9 years ago
@shroukK
I am also having same issue, No voice on red5phone.

In flex fone setting, do following :

SIP server: <IP_where_sip_asterisk_installed>
SIP proxy : <IP_where_sip_asterisk_installed>
red5 url : rtmp://<IP_where_red5_server_installed>/sip

Original comment by perry.a...@gmail.com on 26 Sep 2011 at 7:02

GoogleCodeExporter commented 9 years ago
Good Day

I have the same issue we can phone both sides, but no sound . . .

Anyone who has a solution please reply.

Thank You!

Original comment by albertus...@gmail.com on 17 Jan 2012 at 7:27

GoogleCodeExporter commented 9 years ago
Hi,

I am also having the same issue. I am able to make call once but there is no 
sound either way. Also if I disconnect the call from one end but still it shows 
call established state only. So I cant make call again.

Any help here will be really appreciated. 

Thanks in advance...  

Original comment by asprogra...@gmail.com on 18 Jan 2012 at 12:05

GoogleCodeExporter commented 9 years ago
me so, plz help me...........

Original comment by vetinh0...@gmail.com on 7 Jul 2012 at 5:16