set_enable_ramp times out when writing to its PV. It's not used when turning on the flux ramp. I couldn't find it in pysmurf, sodetlib, or cryo-det. However EnableRampTrigger is used. If EnableRamp isn't actually used anywhere in cryo-det or pysmurf, we can probably delete this.
set_enable_ramp times out when writing to its PV. It's not used when turning on the flux ramp. I couldn't find it in pysmurf, sodetlib, or cryo-det. However EnableRampTrigger is used. If EnableRamp isn't actually used anywhere in cryo-det or pysmurf, we can probably delete this.
https://github.com/slaclab/pysmurf/blob/41e41c9c568aecd7e350ff2f050be58498c56af9/python/pysmurf/client/command/smurf_command.py#L4461
https://github.com/slaclab/pysmurf/blob/41e41c9c568aecd7e350ff2f050be58498c56af9/python/pysmurf/client/tune/smurf_tune.py#L3200
https://confluence.slac.stanford.edu/display/SMuRF/RTM+firmware?preview=/232089354/233309457/Cryo_RTM_setup_note_v2.pdf