Closed Rahulsharma0810 closed 1 year ago
I am trying to use https://sle118.github.io/squeezelite-esp32-installer/ on ESP32-D0WDQ6-V3. I have tried installing on 3 boards at least. "ESP-Wroom-32", All boards are showing. Same below error
Detecting chip type... ESP32 Chip is ESP32-D0WDQ6-V3 (revision 3) Features: Wi-Fi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None Crystal is 40MHz MAC: d4:d4:da:5c:26:bc
entry 0x40080684 I (27) boot: ESP-IDF v4.3.2-dirty 2nd stage bootloader I (27) boot: compile time 21:33:16 I (27) boot: chip revision: 3 I (31) boot_comm: chip revision: 3, min. bootloader chip revision: 1 I (38) qio_mode: Enabling default flash chip QIO I (43) boot.esp32: SPI Speed : 80MHz I (48) boot.esp32: SPI Mode : QIO I (52) boot.esp32: SPI Flash Size : 4MB I (57) boot: Enabling RNG early entropy source... I (62) boot: Partition Table: I (66) boot: ## Label Usage Type ST Offset Length I (73) boot: 0 nvs WiFi data 01 02 00009000 00004000 I (80) boot: 1 otadata OTA data 01 00 0000d000 00002000 I (88) boot: 2 phy_init RF data 01 01 0000f000 00001000 I (95) boot: 3 recovery factory app 00 00 00010000 00140000 I (103) boot: 4 ota_0 OTA app 00 10 00150000 002a0000 I (110) boot: 5 settings WiFi data 01 02 003f0000 00010000 I (118) boot: End of partition table I (122) boot_comm: chip revision: 3, min. application chip revision: 0 I (129) esp_image: segment 0: paddr=00150020 vaddr=3f400020 size=af1ach (717228) map I (350) esp_image: segment 1: paddr=001ff1d4 vaddr=3ffbdb60 size=00e44h ( 3652) load I (352) esp_image: segment 2: paddr=00200020 vaddr=400d0020 size=1c3b30h (1850160) map I (904) esp_image: segment 3: paddr=003c3b58 vaddr=3ffbe9a4 size=0618ch ( 24972) load I (913) esp_image: segment 4: paddr=003c9cec vaddr=40080000 size=1de48h (122440) load I (955) esp_image: segment 5: paddr=003e7b3c vaddr=400c0000 size=00068h ( 104) load I (955) esp_image: segment 6: paddr=003e7bac vaddr=50000000 size=00010h ( 16) load I (977) boot: Loaded app from partition at offset 0x150000 I (977) boot: Disabling RNG early entropy source... I (988) psram: This chip is ESP32-D0WD E (988) psram: PSRAM ID read error: 0xffffffff E (989) cpu_start: Failed to init external RAM, needed for external .bss segment Re-enable cpu cache. abort() was called at PC 0x4008157f on core 0 Backtrace:0x40081a9d:0x3ffe3ba0 0x40097c45:0x3ffe3bc0 0x4009c299:0x3ffe3be0 0x4008157f:0x3ffe3c50 0x400794ed:0x3ffe3c80 |<-CORRUPTED ELF file SHA256: 569947c6e9a94421 Rebooting... ets Jul 29 2019 12:21:46
Any Help is Appreciated.
Make sure you read the documentation before posting. thank you! https://github.com/sle118/squeezelite-esp32#supported-hardware
I am trying to use https://sle118.github.io/squeezelite-esp32-installer/ on ESP32-D0WDQ6-V3. I have tried installing on 3 boards at least. "ESP-Wroom-32", All boards are showing. Same below error
Any Help is Appreciated.