search

slic3r / Slic3r

Open Source toolpath generator for 3D printers
https://slic3r.org/
GNU Affero General Public License v3.0
3.35k stars 1.29k forks source link

wrong bridge orientation #1286

Closed jfpion closed 10 years ago

jfpion commented 11 years ago

when I want to slice : http://jean.francois.pion.free.fr/hollow_cube.stl whith 0 infill 2 perimeters 0.25 height 0.5 wide nozzle 0.4

i got : http://jean.francois.pion.free.fr/hollow_cube_slic3r.gcode

where there is the first layer of the bridge wihich is half on the wrong way

pb bridge

more it look like there is a pb at the junction between the bridge and the perimeters, may be it could be a good idea to skip the inner perimeter part to give room for the bridge to get anchor on the previous perimeter

may be related to https://github.com/alexrj/Slic3r/issues/1144

jfpion commented 11 years ago

sorry i forgot: slic3r 0.9.10b

alranel commented 10 years ago

@jfpion, this FAQ answer applies to this case:

https://github.com/alexrj/Slic3r/wiki/FAQ#q-why-does-the-hollow-calibration-cube-fail

jfpion commented 10 years ago

Le 26/05/2014 16:18, Alessandro Ranellucci a écrit :

@jfpion https://github.com/jfpion, this FAQ answer applies to this case:

https://github.com/alexrj/Slic3r/wiki/FAQ#q-why-does-the-hollow-calibration-cube-fail

Reply to this email directly or view it on GitHub https://github.com/alexrj/Slic3r/issues/1286#issuecomment-44192868.

half of the pb only there is the pb of the bridge with the wrong orientation ie parallel of the two side of the bridge instead of crossing the bridge

independantly of the anchorage of the bridge

JF Pion

Des montages électroniques pour le modélisme http://jean.francois.pion.free.fr le site du vol électrique http://electrofly.free.fr/