Slic3r reported the STL to be manifold. It reported an error in a pop up dialogue box after exporting a partial gcode file. Below are my settings and the error.

Here are my settings:

generated by Slic3r 1.2.0 on Sun Oct 19 12:31:35 2014

[filament:DA Emerald] bed_temperature = 56 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 60 filament_diameter = 2.87 first_layer_bed_temperature = 58 first_layer_temperature = 190 max_fan_speed = 100 min_fan_speed = 100 min_print_speed = 10 slowdown_below_layer_time = 15 temperature = 193

[filament:DA SOLID ORANGE] bed_temperature = 56 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 60 filament_diameter = 2.84 first_layer_bed_temperature = 58 first_layer_temperature = 185 max_fan_speed = 100 min_fan_speed = 100 min_print_speed = 10 slowdown_below_layer_time = 15 temperature = 187

[filament:DA Sapphire] bed_temperature = 56 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 60 filament_diameter = 2.84 first_layer_bed_temperature = 58 first_layer_temperature = 189 max_fan_speed = 100 min_fan_speed = 100 min_print_speed = 10 slowdown_below_layer_time = 15 temperature = 192

[filament:Polycarb] bed_temperature = 60 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 0 fan_below_layer_time = 60 filament_diameter = 2.84 first_layer_bed_temperature = 60 first_layer_temperature = 230 max_fan_speed = 50 min_fan_speed = 25 min_print_speed = 10 slowdown_below_layer_time = 15 temperature = 230

[filament:blue] bed_temperature = 58 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 0 fan_below_layer_time = 60 filament_diameter = 2.84 first_layer_bed_temperature = 63 first_layer_temperature = 203 max_fan_speed = 100 min_fan_speed = 100 min_print_speed = 10 slowdown_below_layer_time = 15 temperature = 200

[filament:casflexi] bed_temperature = 56 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 1 extrusion_multiplier = 1 fan_always_on = 0 fan_below_layer_time = 60 filament_diameter = 2.85 first_layer_bed_temperature = 58 first_layer_temperature = 240 max_fan_speed = 100 min_fan_speed = 35 min_print_speed = 10 slowdown_below_layer_time = 30 temperature = 242

[filament:clearblue] bed_temperature = 56 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 2 extrusion_multiplier = 1 fan_always_on = 0 fan_below_layer_time = 60 filament_diameter = 2.9 first_layer_bed_temperature = 59 first_layer_temperature = 193 max_fan_speed = 100 min_fan_speed = 35 min_print_speed = 10 slowdown_below_layer_time = 30 temperature = 200

[filament:good solid color setting] bed_temperature = 57 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 0 fan_below_layer_time = 60 filament_diameter = 2.84 first_layer_bed_temperature = 62 first_layer_temperature = 190 max_fan_speed = 100 min_fan_speed = 100 min_print_speed = 10 slowdown_below_layer_time = 15 temperature = 182

[filament:natural] bed_temperature = 54 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 0 fan_below_layer_time = 60 filament_diameter = 2.81 first_layer_bed_temperature = 58 first_layer_temperature = 176 max_fan_speed = 100 min_fan_speed = 100 min_print_speed = 10 slowdown_below_layer_time = 15 temperature = 170

[filament:orange_ultimach] bed_temperature = 55 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 0 fan_below_layer_time = 60 filament_diameter = 2.74 first_layer_bed_temperature = 58 first_layer_temperature = 196 max_fan_speed = 60 min_fan_speed = 30 min_print_speed = 10 slowdown_below_layer_time = 30 temperature = 192

[filament:shedbotpink] bed_temperature = 56 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 0 fan_below_layer_time = 60 filament_diameter = 1.7 first_layer_bed_temperature = 58 first_layer_temperature = 190 max_fan_speed = 100 min_fan_speed = 50 min_print_speed = 10 slowdown_below_layer_time = 15 temperature = 187

[presets] filament = DA SOLID ORANGE.ini print = NEW even(default).ini printer = jheadNEW.ini

[print:Casey] avoid_crossing_perimeters = 0 bottom_solid_layers = 3 bridge_acceleration = 0 bridge_flow_ratio = 1 bridge_speed = 60 brim_width = 2 complete_objects = 0 default_acceleration = 0 dont_support_bridges = 1 external_perimeter_extrusion_width = 0 external_perimeter_speed = 50 external_perimeters_first = 0 extra_perimeters = 1 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0 fill_angle = 45 fill_density = 15% fill_pattern = 3dhoneycomb first_layer_acceleration = 0 first_layer_extrusion_width = 0 first_layer_height = 0.1 first_layer_speed = 40% gap_fill_speed = 20 gcode_comments = 0 infill_acceleration = 0 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0 infill_first = 0 infill_only_where_needed = 0 infill_speed = 60 interface_shells = 0 layer_height = 0.175 min_skirt_length = 0 notes = only_retract_when_crossing_perimeters = 1 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0 perimeter_speed = 55 perimeters = 3 post_process = raft_layers = 0 resolution = 0 seam_position = random skirt_distance = 2 skirt_height = 0 skirts = 0 small_perimeter_speed = 30 solid_fill_pattern = rectilinear solid_infill_below_area = 45 solid_infill_every_layers = 0 solid_infill_extrusion_width = 0 solid_infill_speed = 60 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0 support_material_interface_extruder = 1 support_material_interface_layers = 3 support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = pillars support_material_spacing = 1.25 support_material_speed = 60 support_material_threshold = 0 thin_walls = 1 threads = 2 top_infill_extrusion_width = 0 top_solid_infill_speed = 50 top_solid_layers = 4 travel_speed = 130 xy_size_compensation = 0

[print:Casey speed (default)] avoid_crossing_perimeters = 0 bottom_solid_layers = 3 bridge_acceleration = 0 bridge_flow_ratio = 1 bridge_speed = 55 brim_width = 2 complete_objects = 0 default_acceleration = 0 external_perimeter_speed = 100% external_perimeters_first = 0 extra_perimeters = 1 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0 fill_angle = 45 fill_density = 20% fill_pattern = honeycomb first_layer_acceleration = 0 first_layer_extrusion_width = 0 first_layer_height = 0.1 first_layer_speed = 30% gap_fill_speed = 55 gcode_comments = 0 infill_acceleration = 0 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0 infill_first = 0 infill_only_where_needed = 0 infill_speed = 55 layer_height = 0.175 min_skirt_length = 0 notes = only_retract_when_crossing_perimeters = 1 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0 perimeter_speed = 55 perimeters = 3 post_process = raft_layers = 0 resolution = 0 seam_position = random skirt_distance = 2 skirt_height = 0 skirts = 0 small_perimeter_speed = 55 solid_fill_pattern = rectilinear solid_infill_below_area = 45 solid_infill_every_layers = 0 solid_infill_extrusion_width = 0 solid_infill_speed = 55 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0 support_material_interface_extruder = 1 support_material_interface_layers = 3 support_material_interface_spacing = 0 support_material_pattern = honeycomb support_material_spacing = 2.5 support_material_speed = 55 support_material_threshold = 0 thin_walls = 1 threads = 2 top_infill_extrusion_width = 0 top_solid_infill_speed = 55 top_solid_layers = 4 travel_speed = 130

[print:NEW] avoid_crossing_perimeters = 0 bottom_solid_layers = 3 bridge_acceleration = 0 bridge_flow_ratio = 1 bridge_speed = 60 brim_width = 2 complete_objects = 0 default_acceleration = 0 dont_support_bridges = 1 external_perimeter_extrusion_width = 0 external_perimeter_speed = 70% external_perimeters_first = 0 extra_perimeters = 1 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0 fill_angle = 90 fill_density = 20% fill_pattern = honeycomb first_layer_acceleration = 0 first_layer_extrusion_width = 0 first_layer_height = 0.1 first_layer_speed = 30% gap_fill_speed = 20 gcode_comments = 0 infill_acceleration = 0 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0 infill_first = 0 infill_only_where_needed = 0 infill_speed = 60 interface_shells = 0 layer_height = 0.175 min_skirt_length = 0 notes = only_retract_when_crossing_perimeters = 1 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0 perimeter_speed = 30 perimeters = 3 post_process = raft_layers = 0 resolution = 0 seam_position = aligned skirt_distance = 6 skirt_height = 1 skirts = 0 small_perimeter_speed = 30 solid_fill_pattern = rectilinear solid_infill_below_area = 70 solid_infill_every_layers = 0 solid_infill_extrusion_width = 0 solid_infill_speed = 60 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0 support_material_interface_extruder = 1 support_material_interface_layers = 3 support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = honeycomb support_material_spacing = 2.5 support_material_speed = 60 support_material_threshold = 0 thin_walls = 1 threads = 2 top_infill_extrusion_width = 0 top_solid_infill_speed = 50 top_solid_layers = 4 travel_speed = 130 xy_size_compensation = 0

[print:NEW even(default)] avoid_crossing_perimeters = 0 bottom_solid_layers = 3 bridge_acceleration = 0 bridge_flow_ratio = 1 bridge_speed = 55 brim_width = 2 complete_objects = 0 default_acceleration = 0 dont_support_bridges = 1 external_perimeter_extrusion_width = 0 external_perimeter_speed = 55 external_perimeters_first = 0 extra_perimeters = 1 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0 fill_angle = 45 fill_density = 30% fill_pattern = honeycomb first_layer_acceleration = 0 first_layer_extrusion_width = 0 first_layer_height = 0.1 first_layer_speed = 30% gap_fill_speed = 20 gcode_comments = 0 infill_acceleration = 0 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0 infill_first = 0 infill_only_where_needed = 0 infill_speed = 55 interface_shells = 0 layer_height = 0.2 min_skirt_length = 0 notes = only_retract_when_crossing_perimeters = 1 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0 perimeter_speed = 55 perimeters = 3 post_process = raft_layers = 0 resolution = 0 seam_position = aligned skirt_distance = 6 skirt_height = 1 skirts = 0 small_perimeter_speed = 55 solid_fill_pattern = rectilinear solid_infill_below_area = 70 solid_infill_every_layers = 0 solid_infill_extrusion_width = 0 solid_infill_speed = 55 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0 support_material_interface_extruder = 1 support_material_interface_layers = 3 support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = honeycomb support_material_spacing = 2.5 support_material_speed = 55 support_material_threshold = 0 thin_walls = 1 threads = 2 top_infill_extrusion_width = 0 top_solid_infill_speed = 55 top_solid_layers = 5 travel_speed = 130 xy_size_compensation = 0

[print:NEWsphnoid] avoid_crossing_perimeters = 0 bottom_solid_layers = 3 bridge_acceleration = 0 bridge_flow_ratio = 1 bridge_speed = 60 brim_width = 3 complete_objects = 0 default_acceleration = 0 dont_support_bridges = 1 external_perimeter_extrusion_width = 0 external_perimeter_speed = 70% external_perimeters_first = 0 extra_perimeters = 1 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0 fill_angle = 90 fill_density = 10% fill_pattern = honeycomb first_layer_acceleration = 0 first_layer_extrusion_width = 0 first_layer_height = 0.1 first_layer_speed = 30% gap_fill_speed = 20 gcode_comments = 0 infill_acceleration = 0 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0 infill_first = 0 infill_only_where_needed = 0 infill_speed = 60 interface_shells = 0 layer_height = 0.175 min_skirt_length = 0 notes = only_retract_when_crossing_perimeters = 1 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0 perimeter_speed = 30 perimeters = 3 post_process = raft_layers = 0 resolution = 0 seam_position = aligned skirt_distance = 6 skirt_height = 1 skirts = 0 small_perimeter_speed = 30 solid_fill_pattern = rectilinear solid_infill_below_area = 70 solid_infill_every_layers = 0 solid_infill_extrusion_width = 0 solid_infill_speed = 60 spiral_vase = 0 standby_temperature_delta = -5 support_material = 1 support_material_angle = 0 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0 support_material_interface_extruder = 1 support_material_interface_layers = 3 support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = honeycomb support_material_spacing = 2.5 support_material_speed = 60 support_material_threshold = 0 thin_walls = 1 threads = 2 top_infill_extrusion_width = 0 top_solid_infill_speed = 50 top_solid_layers = 4 travel_speed = 130 xy_size_compensation = 0

[print:casflex] avoid_crossing_perimeters = 0 bottom_solid_layers = 3 bridge_acceleration = 0 bridge_flow_ratio = 1 bridge_speed = 60 brim_width = 0 complete_objects = 0 default_acceleration = 0 dont_support_bridges = 1 external_perimeter_extrusion_width = 0 external_perimeter_speed = 70% external_perimeters_first = 0 extra_perimeters = 1 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0 fill_angle = 45 fill_density = 40% fill_pattern = honeycomb first_layer_acceleration = 0 first_layer_extrusion_width = 0 first_layer_height = 0.35 first_layer_speed = 30% gap_fill_speed = 20 gcode_comments = 0 infill_acceleration = 0 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0 infill_first = 0 infill_only_where_needed = 0 infill_speed = 60 interface_shells = 0 layer_height = 0.4 min_skirt_length = 0 notes = only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0 perimeter_speed = 30 perimeters = 2 post_process = raft_layers = 0 resolution = 0 seam_position = random skirt_distance = 6 skirt_height = 1 skirts = 1 small_perimeter_speed = 30 solid_fill_pattern = rectilinear solid_infill_below_area = 70 solid_infill_every_layers = 0 solid_infill_extrusion_width = 0 solid_infill_speed = 60 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0 support_material_interface_extruder = 1 support_material_interface_layers = 3 support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = honeycomb support_material_spacing = 2.5 support_material_speed = 60 support_material_threshold = 0 thin_walls = 1 threads = 2 top_infill_extrusion_width = 0 top_solid_infill_speed = 50 top_solid_layers = 3 travel_speed = 130 xy_size_compensation = 0

[print:casflexi] avoid_crossing_perimeters = 0 bottom_solid_layers = 3 bridge_acceleration = 0 bridge_flow_ratio = 1 bridge_speed = 60 brim_width = 0 complete_objects = 0 default_acceleration = 0 dont_support_bridges = 1 external_perimeter_extrusion_width = 0 external_perimeter_speed = 70% external_perimeters_first = 0 extra_perimeters = 1 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0 fill_angle = 45 fill_density = 25% fill_pattern = honeycomb first_layer_acceleration = 0 first_layer_extrusion_width = 0 first_layer_height = 0.225 first_layer_speed = 30% gap_fill_speed = 20 gcode_comments = 0 infill_acceleration = 0 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0 infill_first = 0 infill_only_where_needed = 0 infill_speed = 40 interface_shells = 0 layer_height = 0.2 min_skirt_length = 0 notes = only_retract_when_crossing_perimeters = 1 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0 perimeter_speed = 30 perimeters = 2 post_process = raft_layers = 0 resolution = 0 seam_position = random skirt_distance = 6 skirt_height = 1 skirts = 1 small_perimeter_speed = 30 solid_fill_pattern = rectilinear solid_infill_below_area = 70 solid_infill_every_layers = 0 solid_infill_extrusion_width = 0 solid_infill_speed = 40 spiral_vase = 0 standby_temperature_delta = -5 support_material = 1 support_material_angle = 0 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0 support_material_interface_extruder = 1 support_material_interface_layers = 3 support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = honeycomb support_material_spacing = 2.5 support_material_speed = 60 support_material_threshold = 0 thin_walls = 1 threads = 2 top_infill_extrusion_width = 0 top_solid_infill_speed = 30 top_solid_layers = 3 travel_speed = 130 xy_size_compensation = 0

[printer:casflexi] bed_shape = 0x0,200x0,200x200,0x200 end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off temperature\nG28 X0 Y0; home X and Y\nM84; motors off\nM81; power off extruder_offset = 0x0 gcode_flavor = reprap layer_gcode = nozzle_diameter = 0.3 retract_before_travel = 2 retract_layer_change = 1 retract_length = 2 retract_length_toolchange = 3 retract_lift = 0.2 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 30 start_gcode = M80;\nG28 ; home all axes\nG92 X3 Y1 Z2.00;\nG1 Z5;\nG1 X15 Y9;\nG1 Z0.05; toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 0 vibration_limit = 0 wipe = 0 z_offset = 0

[printer:chess] bed_shape = 0x0,200x0,200x200,0x200 end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off temperature\nG28 X0 Y0; home X and Y\nM84; motors off\nM81; power off extruder_offset = 0x0 gcode_flavor = reprap layer_gcode = nozzle_diameter = 0.4 retract_before_travel = 2 retract_layer_change = 1 retract_length = 1.5 retract_length_toolchange = 3 retract_lift = 0.2 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 30 start_gcode = M80;\nG90;\nG28 ; home all axes\nG92 Z9.75\nG1 X0 Y0 F3000;\nG1 Z0; toolchange_gcode = use_relative_e_distances = 0 vibration_limit = 0 wipe = 0 z_offset = 0

[printer:j-head casey (DEF)] bed_shape = 10x18,200x18,200x188,10x188 end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off temperature\nG28 Y0; home X and Y\nM84; motors off\nM81; power off extruder_offset = 0x0 gcode_flavor = reprap layer_gcode = nozzle_diameter = 0.3 retract_before_travel = 4 retract_layer_change = 1 retract_length = 1.5 retract_length_toolchange = 3 retract_lift = 0.2 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 30 start_gcode = M80;\nG28 ; home all axes\nG92 Z2;\nG1 Z5;\nG1 X18 Y10 F3000;\nG1 Z0.05;\n toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 0 vibration_limit = 0 wipe = 0 z_offset = 0

[printer:jheadNEW] bed_shape = 0x0,190x0,190x200,0x200 end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; \nG28 X0 ; home X axis\nM84 ; disable motors extruder_offset = 0x0 gcode_flavor = reprap layer_gcode = nozzle_diameter = 0.4 retract_before_travel = 4 retract_layer_change = 1 retract_length = 1.2 retract_length_toolchange = 10 retract_lift = 0.2 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 30 start_gcode = M80; power on\nG28 ; home all axes\nG1 Z4 F90 ; lift nozzle\nG1 X0 Y0 F2000\nG1 Z0 F90\n toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 0 vibration_limit = 0 wipe = 0 z_offset = 0

[settings] autocenter = 1 mode = expert

And here is the error:

Error in function split_at_vertex at src/libslic3r/ExtrusionEntity.cpp:263: Point not found at /Applications/Slic3r 1.2 exp.app/Contents/Resources/lib/std/Slic3r/GCode.pm line 183 thread 34 Slic3r::GCode::extrude_loop('Slic3r::GCode=HASH(0x56641830)', 'Slic3r::ExtrusionLoop::Ref=SCALAR(0x2f28c70)', 'perimeter') called at /Applications/Slic3r 1.2 exp.app/Contents/Resources/lib/std/Slic3r/GCode.pm line 134 thread 34 Slic3r::GCode::extrude('Slic3r::GCode=HASH(0x56641830)', 'Slic3r::ExtrusionLoop::Ref=SCALAR(0x2f28c70)', 'perimeter') called at /Applications/Slic3r 1.2 exp.app/Contents/Resources/lib/std/Slic3r/GCode/Layer.pm line 215 thread 34 Slic3r::GCode::Layer::_extrude_perimeters('Slic3r::GCode::Layer=HASH(0x5199ab80)', 'ARRAY(0x1130fc0)', 'Slic3r::Print::Region::Ref=SCALAR(0x43313c40)') called at /Applications/Slic3r 1.2 exp.app/Contents/Resources/lib/std/Slic3r/GCode/Layer.pm line 183 thread 34 Slic3r::GCode::Layer::process_layer('Slic3r::GCode::Layer=HASH(0x5199ab80)', 'Slic3r::Layer::Ref=SCALAR(0x1283ea0)', 'ARRAY(0x4330f840)') called at /Applications/Slic3r 1.2 exp.app/Contents/Resources/lib/std/Slic3r/Print.pm line 925 thread 34 Slic3r::Print::write_gcode('Slic3r::Print=SCALAR(0x56f3c370)', '/Users/user/Downloads/herringbone-gearsmall_new_fixed.gcode') called at /Applications/Slic3r 1.2 exp.app/Contents/Resources/lib/std/Slic3r/Print.pm line 395 thread 34 Slic3r::Print::export_gcode('Slic3r::Print=SCALAR(0x56f3c370)', 'output_file', '/Users/user/Downloads/herringbone-gearsmall_new_fixed.gcode') called at /Applications/Slic3r 1.2 exp.app/Contents/Resources/lib/std/Slic3r/GUI/Plater.pm line 1016 thread 34 eval {...} called at /Applications/Slic3r 1.2 exp.app/Contents/Resources/lib/std/Slic3r/GUI/Plater.pm line 1015 thread 34 Slic3r::GUI::Plater::ANON() called at /Applications/Slic3r 1.2 exp.app/Contents/Resources/lib/std/Slic3r.pm line 106 thread 34 Slic3r::ANON() called at /Applications/Slic3r 1.2 exp.app/Contents/Resources/lib/std/Slic3r.pm line 107 thread 34 eval {...} called at /Applications/Slic3r 1.2 exp.app/Contents/Resources/lib/std/Slic3r.pm line 107 thread 34

slic3r / Slic3r

Partial export of gcode file #2308

generated by Slic3r 1.2.0 on Sun Oct 19 12:31:35 2014