search

slic3r / Slic3r

Open Source toolpath generator for 3D printers
https://slic3r.org/
GNU Affero General Public License v3.0
3.35k stars 1.29k forks source link

command line option not working, master from dec 28th 2020, extruder_offset 0,0 #5037

Open andrewhodel opened 3 years ago

andrewhodel commented 3 years ago

--nozzle-diameter .5 --print-center 100,100 --z-offset 0 --vibration-limit 0 --filament-diameter 3 --extrusion-multiplier 1 --temperature 200 --first-layer-temperature 200 --bed-temperature 0 --first-layer-bed-temperature 0 --travel-speed 130 --perimeter-speed 30 --small-perimeter-speed 30 --external-perimeter-speed 70% --infill-speed 60 --solid-infill-speed 60 --top-solid-infill-speed 50 --support-material-speed 60 --support-material-interface-speed 100% --bridge-speed 60 --gap-fill-speed 20 --first-layer-speed 30% --perimeter-acceleration 0 --infill-acceleration 0 --bridge-acceleration 0 --first-layer-acceleration 0 --default-acceleration 0 --layer-height .3 --first-layer-height .35 --infill-every-layers 1 --solid-infill-every-layers 0 --perimeters 3 --top-solid-layers 3 --bottom-solid-layers 3 --fill-density 40% --fill-angle 45 --solid-infill-below-area 70 --support-material-threshold 0 --support-material-spacing 2.5 --support-material-angle 0 --support-material-interface-layers 3 --support-material-interface-spacing 0 --raft-layers 0 --support-material-enforce-layers 0 --retract-length 1 --retract-speed 30 --retract-restart-extra 0 --retract-before-travel 2 --retract-lift 0 --retract-length-toolchange 1 --retract-restart-extra-toolchange 0 --min-fan-speed 35 --max-fan-speed 100 --bridge-fan-speed 100 --fan-below-layer-time 60 --slowdown-below-layer-time 30 --min-print-speed 10 --disable-fan-first-layers 1 --skirts 1 --skirt-distance 6 --skirt-height 1 --min-skirt-length 0 --brim-width 0 --scale 1 --rotate 0 --duplicate 1 --duplicate-grid 1,1 --duplicate-distance 6 --xy-size-compensation 0 --extruder-clearance-radius 20 --extruder-clearance-height 20 --extruder-offset 0,0 --perimeter-extruder 1 --infill-extruder 1 --support-material-extruder 1 --support-material-interface-extruder 1 --standby-temperature-delta -5 workingStl.stl

Slic3r stderr: Config ERR: Deserialisation error of [ARRAY(0x1a56678)] bad lexical cast: source type value could not be interpreted as target (expected list of points) Slic3r stderr: Error in function apply_only at src/libslic3r/ConfigBase.cpp:400: Unexpected failure when deserializing serialized value for extruder_offset at /home/pi/Slic3r/slic3r.pl line 136.

andrewhodel commented 3 years ago

It is the same thing the manual says, why is it not working?

https://manual.slic3r.org/expert-mode/multiple-extruders