I want to print a coating with a thickness of 0.013mm on an existing part with a height of 7mm. Therefore, I set the Z offset to 7, and I expect all nozzle movements to start from Z = 7.013mm. However, the nozzle only moves to Z = 7.013mm before the actual printing starts, and once the printing officially begins, the nozzle automatically moves back to Z = 0.013mm to start printing. Why is this happening?
I want to print a coating with a thickness of 0.013mm on an existing part with a height of 7mm. Therefore, I set the Z offset to 7, and I expect all nozzle movements to start from Z = 7.013mm. However, the nozzle only moves to Z = 7.013mm before the actual printing starts, and once the printing officially begins, the nozzle automatically moves back to Z = 0.013mm to start printing. Why is this happening?