search

slic3r / slic3r-profiles

Contributed profiles for Slic3r; compatible with PrusaSlicer.
GNU Affero General Public License v3.0
38 stars 43 forks source link

Added Elegoo Neptune Printers #24

Closed mlee12382 closed 2 years ago

mlee12382 commented 2 years ago

Profiles for Elegoo Neptune Printers tested and working in SuperSlicer 2.4.58.3

supermerill commented 2 years ago

the stl is too big. can you decimate it to the minimum? (just before the decimation degrade it) ideally, ~100kio

https://www.youtube.com/watch?v=921cDYBpuL4

mlee12382 commented 2 years ago

the stl is too big. can you decimate it to the minimum? (just before the decimation degrade it) ideally, ~100kio

Alternatively if it's not a requirement to have the stl I can just delete it and the references to it in the .ini?

supermerill commented 2 years ago

Maybe it's better that way. The stl has too many useless details like the springs, some cylinders below the build plate, the wheels.... ideally all of these should be cut away, laving only the build plate and a bit of the frame around it.

mlee12382 commented 2 years ago

Yeah, I just used the model that someone else in the Neptune community had provided, it is very "busy" and distracting when you are trying to slice something. I could probably grab a cleaner model from the printer step files but seems a little unnecessary as long as the build plate is there.

mlee12382 commented 2 years ago

Thanks so much for all the help! :)