Closed codifierr closed 5 months ago
Yes, the problem is there is not enough free space when some of the other features are enabled i.e. 3 phase, AUX, non-essential, so you have to design conditional checks to only display this data when some of those options are not enabled. Will keep it in mind for a future release
Thanks for considering this request.
@codifierr you could always use that box to display the grid Voltage, Frequency and Load (assume you mean the overall total kW being used in the house from all sources?). Just use the applicable sensors for those instead of the default ones.
This is what I do for the Huawei inverters, in the screenshot above, we can see:
242.6V Grid Voltage 50Hz Frequency 9.48kW Total House Load (then looking at other boxes, quickly it can be seen that 9.38kW is coming from solar [or battery] and 93W is coming from the grid. Can also quickly see 8.57kW of that is going to non-essential with 7kW to EV charger / 1.51kW to Ducted AirCon).
Is there an existing issue for this?
Current Behavior
Currently, the card doesn't show load and grid current
Expected behaviour
The card should show the load and grid current.
Possible Solutions
No response
Mode
Both
Context / Reason
The card shows Battery, solar, and Inverter. It can also show the Load and Grid current. Thanks for this project it is awesome