search

slipx06 / sunsynk-power-flow-card

⚡A customizable Home Assistant card to emulate the Sunsynk System flow that's displayed on the Inverter screen.
MIT License
160 stars 48 forks source link

Grid and Inverter Data #464

Open preussal opened 1 month ago

preussal commented 1 month ago

Is there an existing issue for this?

Current Behavior

Voltage from Inverter and Grid not in the right Positions grafik

My House have this Configuration Grid -> SDM230 Powermeter 1 -> Hybrid Inverter -> SDM230 Powermeter 2 -> LOAD If the Powermeter 1 say we have Power Cut. The Dashbord show me 230V and 50 Hz on the Grid Tab. First i think i do some entities on the wrong possession but then i check all the entities and there is nothing wrong.

Expected behaviour

Inverter Output Voltage and Frequency over the Inverter in the Tab Grid Voltage and Frequency in the Gird Tab

grafik

If Grid Voltage or Frequency 0 / None / Unknown = Off-Grid

And maybe connect the Grid Line to the inverter like in the "Lite" version.

Possible Solutions

No response

Mode

full

Context / Reason

Values on the right position make more sense. Thank you

slipx06 commented 3 weeks ago

Hi. Yes that would make more sense but this becomes a problem when three phase is enabled as there is no more space. The trade off is to provide the sensors you would prefer to see. i.e. SDM230 Powermeter 1 to the red box and only monitor inverter power out and amps.