search

slipx06 / sunsynk-power-flow-card

⚡A customizable Home Assistant card to emulate the Sunsynk System flow that's displayed on the Inverter screen.
MIT License
196 stars 55 forks source link

Please add V2H Feature to card #528

Open terzo33 opened 1 week ago

terzo33 commented 1 week ago

Is there an existing issue for this?

Current Behavior

I can't see V2H (vehicle to home) icon and sensors (hz,V,A). Actually I'm used Grid Power for V2H but there is no way to see how much power the two power inputs are sending to the inverter. the only possibility at the moment is to choose V2H or grid power :(

Expected behaviour

Please add V2H (vehicle to home) icon and sensors (Hz,V,A) near Grid Power icon

Possible Solutions

No response

Mode

lite

Context / Reason

I have ATS for switch automatically V2H and Grid Power. Please add V2H (vehicle to home) icon and sensors (Hz,V,A) near Grid Power icon. I see the V2H values ​​via a smart energy sensor

slipx06 commented 1 week ago

HI. Have you tried to use the AUX options to show this?

image

terzo33 commented 1 week ago

HI. Have you tried to use the AUX options to show this?

image

Hi @slipx06 , aux option is for load (inverter Output), V2L or V2H is like a grid charge(energy to inverter)

put an icon for replace "non-essential" icon and values with the icon of the machine and values with the energy going to the inverter

Thanks

slipx06 commented 1 week ago

You can use the AUX port to send energy to the inverter. Some people connect a generator or another micro-inverter. Or you can also use the non-essential circuit.

This is how some other users have configured it

image

https://community.home-assistant.io/t/inverter-power-flow-card/562933/438

terzo33 commented 1 week ago

Thanks a lot. I will try but maybe with aux option is can't see voltage and frequency values